component
MCP6V91UT-E
Public Made by Adomby adom
Microchip Tech Precision Op Amps, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| mcp6v91ut-e-etched.glb | 7d ago |
| mcp6v91ut-e-etched.step | 7d ago |
| mcp6v91ut-e-hero.glb | 7d ago |
| mcp6v91ut-e-hero.overlay.json | 7d ago |
| mcp6v91ut-e.glb | 7d ago |
| mcp6v91ut-e.kicad_mod | 7d ago |
| mcp6v91ut-e.kicad_sym | 7d ago |
| mcp6v91ut-e.lbr | 7d ago |
| mcp6v91ut-e.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
MCP6V91UT-E
Microchip Tech · Precision Op Amps · SC-70-5
MCP6V91UT-E from Microchip Tech, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | power_in | Noninverting input; a high-impedance CMOS input with low bias currents, and for normal operation it must stay between VSS and VDD. |
| 2 | VSS | power_in | Negative power supply; connect to ground in single-supply use, with VDD 2.4 V to 5.5 V above it. |
| 3 | VIN- | power_in | Inverting input; a high-impedance CMOS input with low bias currents, and for normal operation it must stay between VSS and VDD. |
| 4 | VOUT | output | Analog output; a low-impedance voltage source. |
| 5 | VDD | power_in | Positive power supply, 2.4 V to 5.5 V higher than VSS; it requires bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -9 | 9 | µV | TA = +25°C | 3 | |
| Input Offset Voltage Drift with Temperature (MCP6V91/1U, VDD = 2.4V) | TC1 | -24 | 24 | nV/°C | TA = -40 to +125°C, VDD = 2.4V (Note 1) | 3 | |
| Input Offset Voltage Drift with Temperature (MCP6V91/1U, VDD = 5.5V) | TC1 | -17 | 17 | nV/°C | TA = -40 to +125°C, VDD = 5.5V (Note 1) | 3 | |
| Input Offset Voltage Quadratic Temperature Coefficient (MCP6V91/1U, VDD = 2.4V) | TC2 | -30 | 30 | pV/°C2 | TA = -40 to +125°C, VDD = 2.4V | 3 | |
| Input Offset Voltage Quadratic Temperature Coefficient (MCP6V91/1U, VDD = 5.5V) | TC2 | -12 | 12 | pV/°C2 | TA = -40 to +125°C, VDD = 5.5V | 3 | |
| Input Offset Voltage Aging | ΔVOS | -0.75 | 0.75 | µV | 408 hours Life Test at +150°, measured at +25°C | 4 | |
| Power Supply Rejection Ratio | PSRR | 117 | 137 | dB | 4 | ||
| Input Bias Current | IB | -50 | 50 | pA | 4 | ||
| Input Bias Current across Temperature | IB | 0 | 0.2 | 1 | nA | TA = +125°C | 4 |
| Input Offset Current | IOS | -400 | 400 | pA | 4 | ||
| Input Offset Current across Temperature | IOS | -75 | 75 | pA | TA = +85°C | 4 | |
| Input Offset Current across Temperature | IOS | -500 | 500 | pA | TA = +125°C | 4 | |
| Common-Mode Rejection Ratio | CMRR | 112 | 132 | dB | VDD = 2.4V, VCM = -0.2V to 2.7V (Note 2) | 4 | |
| Common-Mode Rejection Ratio | CMRR | 118 | 140 | dB | VDD = 5.5V, VCM = -0.2V to 5.8V (Note 2) | 4 | |
| DC Open-Loop Gain (Large Signal) | AOL | 119 | 142 | dB | VDD = 2.4V, VOUT = 0.3V to 2.0V | 4 | |
| DC Open-Loop Gain (Large Signal) | AOL | 126 | 158 | dB | VDD = 5.5V, VOUT = 0.3V to 5.3V | 4 | |
| Output Short-Circuit Current | ISC | -15 | 15 | mA | VDD = 2.4V | 4 | |
| Output Short-Circuit Current | ISC | -40 | 40 | mA | VDD = 5.5V | 4 | |
| Supply Voltage | VDD | 2.4 | 5.5 | V | 4 | ||
| Quiescent Current per Amplifier | IQ | 0.6 | 1.1 | 1.6 | mA | IO = 0 | 4 |
| Power-on Reset (POR) Trip Voltage | VPOR | 1.4 | 1.85 | 2.2 | V | 4 | |
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 5 | |
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| ESD protection HBM (MCP6V91/1U) | 4 | kV | HBM, MCP6V91/1U | 3 | |||
| ESD protection CDM (MCP6V91/1U) | 1.5 | kV | CDM, MCP6V91/1U | 3 | |||
| ESD protection MM (MCP6V91/1U) | 400 | V | MM, MCP6V91/1U | 3 | |||
| Thermal Resistance, 5LD-SC70 (junction to ambient) | θJA | 209 | °C/W | 5LD-SC70 package | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | TSSOP, 14-lead *Y = Nickel palladium gold manufacturing designator. | 45 |
CAD (KiCad official)
- Symbol:
MCP6V91UT-E - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6v91ut-e-etched.step/mcp6v91ut-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v91ut-e.step/mcp6v91ut-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
d1345a185e0517c0, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).