component
MCP6V86T-E
Public Made by Adomby adom
Microchip Tech Precision OpAmps, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6V86T-E
Microchip Tech · Precision OpAmps · SOT-23-5
MCP6V86T-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Analog output pin, a low-impedance voltage source. |
| 2 | VSS | power_in | Negative power supply, normally connected to ground in single-supply use; VDD must be 2.2V to 5.5V higher than VSS. |
| 3 | VIN+ | power_in | Noninverting input, a high-impedance CMOS input with low bias current, to be kept between VSS and VDD. |
| 4 | VIN- | power_in | Inverting input, a high-impedance CMOS input with low bias current, to be kept between VSS and VDD. |
| 5 | VDD | power_in | Positive power supply, 2.2V to 5.5V above VSS, and it needs bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -25 | 25 | µV | TA = +25°C | 3 | |
| Input Offset Voltage Drift (linear TC) | TC1 | -150 | 150 | nV/°C | TA = -40 to +125°C (Note 1, design guidance only) | 3 | |
| Power Supply Rejection Ratio | PSRR | 110 | 127 | dB | 3 | ||
| Input Bias Current | IB | -50 | 2 | 50 | pA | 4 | |
| Input Bias Current Across Temperature | IB | 0 | 0.24 | 1 | nA | TA = +125°C | 4 |
| Input Offset Current | IOS | -400 | 100 | 400 | pA | 4 | |
| Input Offset Current Across Temperature | IOS | -500 | 100 | 500 | pA | TA = +125°C | 4 |
| Common-Mode Rejection Ratio | CMRR | 103 | 128 | dB | VDD = 2.2V, VCM = -0.2V to 2.5V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 112 | 136 | dB | VDD = 5.5V, VCM = -0.2V to 5.8V | 4 | |
| DC Open-Loop Gain | AOL | 97 | 146 | dB | VDD = 2.2V, VOUT = 0.3V to 2.0V | 4 | |
| DC Open-Loop Gain | AOL | 111 | 151 | dB | VDD = 5.5V, VOUT = 0.3V to 5.3V | 4 | |
| Minimum Output Voltage Swing | VOL | 0 | 35 | 120 | mV | RL = 1 kΩ, G = +2, 0.5V input overdrive; relative to VSS | 4 |
| Maximum Output Voltage Swing | VOH | -120 | -45 | 0 | mV | RL = 1 kΩ, G = +2, 0.5V input overdrive; relative to VDD | 4 |
| Supply Voltage | VDD | 2.2 | 5.5 | V | 4 | ||
| Quiescent Current per Amplifier | IQ | 250 | 500 | 770 | µA | IO = 0 | 4 |
| Power-on Reset Trip Voltage | VPOR | 1.2 | 1.6 | 1.9 | V | 4 | |
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 5 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Analog Input Voltage (VIN+, VIN-) | -1 | 1 | V | VSS, 1.0V to VDD + 1.0V (offsets relative to rails) | 3 | ||
| All Other Inputs and Outputs | -0.3 | 0.3 | V | VSS, 0.3V to VDD + 0.3V (offsets relative to rails) | 3 | ||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Protection HBM | 4 | kV | MCP6V86/6U | 3 | |||
| ESD Protection CDM | 1.5 | kV | MCP6V86/6U | 3 | |||
| ESD Protection MM | 400 | V | MCP6V86/6U | 3 | |||
| Thermal Resistance, 5-Lead SOT-23 | θJA | 201 | °C/W | 5 | |||
| Input Offset Voltage Quadratic Temperature Coefficient | TC2 | 30 | pV/°C2 | TA = -40°C to +125°C; printed ±30 | 3 | ||
| Input Offset Voltage Aging | ΔVOS | 0.25 | µV | 408 hours Life Test at +150°C, measured at +25°C; printed ±0.25 | 3 | ||
| Output Short-Circuit Current | ISC | 15 | mA | VDD = 2.2V; printed ±15 | 4 | ||
| Output Short-Circuit Current | ISC | 40 | mA | VDD = 5.5V; printed ±40 | 4 | ||
| Gain Bandwidth Product | GBWP | 5 | MHz | 5 | |||
| Slew Rate | SR | 4 | V/µs | 5 | |||
| Phase Margin | PM | 60 | ° | G = +1 | 5 | ||
| Input Noise Voltage | Eni | 0.28 | µVP-P | f = 0.1 Hz to 10 Hz | 5 | ||
| Input Noise Voltage Density | eni | 13 | nV/√Hz | f < 2 kHz | 5 | ||
| Start-up Time | tSTR | 100 | µs | G = +1, 0.1% VOUT settling (Note 2) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | 14-Lead *Y = Nickel palladium gold manufacturing designator. | 49 |
CAD (KiCad official)
- Symbol:
MCP6V86T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6v86t-e-etched.step/mcp6v86t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v86t-e.step/mcp6v86t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (52 pp, sha256
201ddce8232c3062, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).