component

MCP6V76UT-E

Public Made by Adom

by adom

Microchip Tech Precision OpAmps, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoperational amplifier-comparatormcp6v76ut-efactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 14d ago
viewers mcp6v76ut-e: viewers · Ray 14d ago
mcp6v76ut-e-etched.glb Publish 0.1.0 · Ray 14d ago
mcp6v76ut-e-etched.step mcp6v76ut-e: factory component page (tier=mfr) · Ray 14d ago
mcp6v76ut-e-hero.glb mcp6v76ut-e: hero GLB from the etched model (keeps the MPN mark) · Ray 14d ago
mcp6v76ut-e-hero.overlay.json Publish 0.1.0 · Ray 14d ago
mcp6v76ut-e.glb Publish 0.1.0 · Ray 14d ago
mcp6v76ut-e.kicad_mod Publish 0.1.0 · Ray 14d ago
mcp6v76ut-e.kicad_sym Publish 0.1.0 · Ray 14d ago
mcp6v76ut-e.lbr Publish 0.1.0 · Ray 14d ago
mcp6v76ut-e.step Publish 0.1.0 · Ray 14d ago
package.json Publish 0.1.0 · Ray 14d ago
page.json Set visibility: public · Ray 14d ago
README.md Publish 0.1.0 · Ray 14d ago

MCP6V76UT-E

Microchip Tech · Precision OpAmps · SOT-23-5

MCP6V76UT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN+ power_in Noninverting input of the op amp, a high-impedance CMOS input with low bias current.
2 VSS power_in Negative power supply, normally connected to ground in single-supply use; VDD must be 2V to 5.5V above VSS.
3 VIN- power_in Inverting input of the op amp, a high-impedance CMOS input with low bias current.
4 VOUT output Op amp analog output, a low-impedance voltage source.
5 VDD power_in Positive power supply, 2V to 5.5V above VSS, and needs bypass capacitors.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -25 25 µV TA = +25°C 3
Input Offset Voltage Drift with Temperature (Linear Temp. Co.) TC1 -150 150 nV/°C TA = -40 to +125°C (Note 1: design guidance only; not tested) 3
Power Supply Rejection Ratio PSRR 110 125 dB 3
Input Bias Current IB -50 1 50 pA 3
Input Bias Current across Temperature IB 0 0.2 1.5 nA TA = +125°C 3
Input Offset Current IOS -250 60 250 pA 3
Input Offset Current across Temperature IOS -800 50 800 pA TA = +125°C 3
Common Mode Input Voltage Range Low VCML -0.2 V VSS - 0.2 V 4
Common Mode Input Voltage Range High VCMH 0.3 V VDD + 0.3 V 4
Common Mode Rejection Ratio CMRR 103 122 dB VDD = 2V, VCM = -0.2V to 2.3V 4
Common Mode Rejection Ratio CMRR 112 130 dB VDD = 5.5V, VCM = -0.2V to 5.8V 4
DC Open-Loop Gain AOL 96 132 dB VDD = 2V, VOUT = 0.3V to 1.8V 4
DC Open-Loop Gain AOL 111 137 dB VDD = 5.5V, VOUT = 0.3V to 5.3V 4
Minimum Output Voltage Swing VOL 0 35 121 mV RL = 2 kΩ, G = +2, 0.5V input overdrive; relative to VSS 4
Maximum Output Voltage Swing VOH -121 -45 0 mV RL = 2 kΩ, G = +2, 0.5V input overdrive; relative to VDD 4
Supply Voltage VDD 2 5.5 V 4
Quiescent Current per Amplifier IQ 100 170 260 µA IO = 0 4
POR Trip Voltage VPOR 0.9 1.2 1.6 V 4
Specified Temperature Range TA -40 125 °C 5
Operating Temperature Range TA -40 125 °C Operation must not cause TJ to exceed +150°C 5
Storage Temperature Range TA -65 150 °C 5
Current at Input Pins -2 2 mA 3
Analog Inputs (VIN+ and VIN-) -1 1 V VSS - 1.0V to VDD + 1.0V 3
All Other Inputs and Outputs -0.3 0.3 V VSS - 0.3V to VDD + 0.3V 3
Current at Output and Supply Pins -30 30 mA 3
Maximum Junction Temperature TJ 150 °C 3
Thermal Resistance, 5L-SOT-23 θJA 201 °C/W 5
Input Offset Voltage Quadratic Temp. Co. TC2 -30 pV/°C2 TA = -40 to +125°C 3
Output Short Circuit Current ISC 9 mA VDD = 2V 4
Output Short Circuit Current ISC 26 mA VDD = 5.5V 4
Gain Bandwidth Product GBWP 2 MHz 5
Slew Rate SR 1 V/µs 5
Phase Margin PM 60 ° G = +1 5
Input Noise Voltage Eni 0.45 µVP-P f = 0.1 Hz to 10 Hz 5
Input Noise Voltage Density eni 21 nV/√Hz f < 2 kHz 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts gold 14-lead *Y = Nickel palladium gold manufacturing designator. 45

CAD (KiCad official)

  • Symbol: MCP6V76UT-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp6v76ut-e-etched.step / mcp6v76ut-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6v76ut-e.step / mcp6v76ut-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (48 pp, sha256 9a09a263847f4e91, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF