3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6V31UT-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOT-23-5
MCP6V31UT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | power_in | Non-inverting input (Op Amp A) is a high-impedance CMOS input with low bias currents. |
| 2 | VSS | power_in | Negative power supply, connected to ground in single-supply configuration, with VDD 1.8V to 5.5V above it. |
| 3 | VIN- | power_in | Inverting input (Op Amp A) is a high-impedance CMOS input with low bias currents. |
| 4 | VOUT | output | Analog output is a low-impedance voltage source. |
| 5 | VDD | power_in | Positive power supply, 1.8V to 5.5V higher than VSS, requires bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -8 | 8 | µV | TA = +25°C | 3 | |
| Input Offset Voltage Drift with Temperature (Linear Temp. Co.) | TC1 | -50 | 50 | nV/°C | TA = -40 to +125°C (Note 1) | 3 | |
| Power Supply Rejection Ratio | PSRR | 120 | 135 | dB | 3 | ||
| Input Bias Current across Temperature | IB | 0 | 2.9 | 5 | nA | TA = +125°C | 3 |
| Input Offset Current across Temperature | IOS | -1 | 0.4 | 1 | nA | TA = +125°C | 3 |
| Common Mode Rejection Ratio | CMRR | 110 | 125 | dB | VDD = 1.8V, VCM = -0.15V to 2.0V (Note 2) | 4 | |
| Common Mode Rejection Ratio | CMRR | 120 | 135 | dB | VDD = 5.5V, VCM = -0.15V to 5.7V (Note 2) | 4 | |
| DC Open-Loop Gain (large signal) | AOL | 103 | 125 | dB | VDD = 1.8V, VOUT = 0.3V to 1.6V | 4 | |
| DC Open-Loop Gain (large signal) | AOL | 120 | 135 | dB | VDD = 5.5V, VOUT = 0.3V to 5.3V | 4 | |
| Supply Voltage | VDD | 1.8 | 5.5 | V | 4 | ||
| Quiescent Current per amplifier | IQ | 12 | 23 | 34 | µA | IO = 0, MCP6V31/1U | 4 |
| POR Trip Voltage | VPOR | 0.9 | 1.6 | V | 4 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | (Note 1) | 5 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Thermal Resistance, 5L-SOT-23 | θJA | 201 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | Body, 14-lead * Y = Nickel palladium gold manufacturing designator. Only | 47 |
CAD (KiCad official)
- Symbol:
MCP6V31UT-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6v31ut-e-etched.step/mcp6v31ut-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v31ut-e.step/mcp6v31ut-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
dedfced63edfdb86, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).