main
Ray
Publish 0.1.0
991c4d6
MCP6V27-E
Microchip Tech · Pre-ordered MCUs · SOIC-8
MCP6V27-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Op amp A output, a low-impedance voltage source. |
| 2 | VINA- | input | Op amp A inverting input, a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Op amp A non-inverting input, a high-impedance CMOS input with low bias current. |
| 4 | VSS | power_in | Negative power supply, connected to ground in single-supply use; VDD is 2.3V to 5.5V higher than VSS. |
| 5 | VINB+ | input | Op amp B non-inverting input, a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Op amp B inverting input, a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Op amp B output, a low-impedance voltage source. |
| 8 | VDD | power_in | Positive power supply, 2.3V to 5.5V higher than VSS, and it needs bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -2 | 2 | µV | TA = +25°C (Note 1) | 3 | |
| Input Offset Voltage Drift with Temperature (linear) | TC1 | -50 | 50 | nV/°C | TA = -40 to +125°C (Note 1) | 3 | |
| Power Supply Rejection | PSRR | 125 | 142 | dB | (Note 1) | 3 | |
| Input Bias Current across Temperature | IB | 1.2 | 5 | nA | TA = +125°C | 3 | |
| Common-Mode Input Voltage Range Low | VCML | -0.15 | V | VSS − 0.15 V (Note 2) | 4 | ||
| Common-Mode Input Voltage Range High | VCMH | 0.2 | V | VDD + 0.2 V (Note 2) | 4 | ||
| Common-Mode Rejection | CMRR | 120 | 136 | dB | VDD = 2.3V, VCM = -0.15V to 2.5V (Note 1, Note 2) | 4 | |
| Common-Mode Rejection | CMRR | 125 | 142 | dB | VDD = 5.5V, VCM = -0.15V to 5.7V (Note 1, Note 2) | 4 | |
| DC Open-Loop Gain | AOL | 125 | 147 | dB | VDD = 2.3V, VOUT = 0.2V to 2.1V (Note 1) | 4 | |
| DC Open-Loop Gain | AOL | 133 | 155 | dB | VDD = 5.5V, VOUT = 0.2V to 5.3V (Note 1) | 4 | |
| Minimum Output Voltage Swing | VOL | 5 | 15 | mV | G = +2, 0.5V input overdrive; relative to VSS | 4 | |
| Maximum Output Voltage Swing | VOH | -15 | -5 | mV | G = +2, 0.5V input overdrive; relative to VDD | 4 | |
| Supply Voltage | VDD | 2.3 | 5.5 | V | 4 | ||
| Quiescent Current per amplifier | IQ | 450 | 620 | 800 | µA | IO = 0 | 4 |
| POR Trip Voltage | VPOR | 1.15 | 1.65 | V | 4 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | (Note 1) | 6 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 6 | ||
| Thermal Resistance, 8L-SOIC | θJA | 150 | °C/W | 6 | |||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Storage Temperature | -65 | 150 | °C | 3 | |||
| Max. Junction Temperature | TJ | 150 | °C | 3 | |||
| Analog Inputs (VIN+ and VIN-) | -1 | 1 | V | VSS, 1.0V to VDD+1.0V (offsets relative to supply rails) | 3 | ||
| All other Inputs and Outputs | -0.3 | 0.3 | V | VSS, 0.3V to VDD+0.3V (offsets relative to supply rails) | 3 | ||
| Input Offset Voltage Quadratic Temperature Coefficient | TC2 | 0.2 | nV/°C² | TA = -40 to +125°C; printed ±0.2 | 3 | ||
| Gain Bandwidth Product | GBWP | 2 | MHz | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | MS = Plastic Micro Small Outline Package, 8-lead SN = Plastic SOIC (150mil Body), 8-lead | 47 |
CAD (KiCad official)
- Symbol:
MCP6V27-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp6v27-e-etched.step/mcp6v27-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v27-e.step/mcp6v27-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
027e9159e010816a, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP6V27-E
**Microchip Tech** · Pre-ordered MCUs · SOIC-8
MCP6V27-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Op amp A output, a low-impedance voltage source. |
| 2 | VINA- | input | Op amp A inverting input, a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Op amp A non-inverting input, a high-impedance CMOS input with low bias current. |
| 4 | VSS | power_in | Negative power supply, connected to ground in single-supply use; VDD is 2.3V to 5.5V higher than VSS. |
| 5 | VINB+ | input | Op amp B non-inverting input, a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Op amp B inverting input, a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Op amp B output, a low-impedance voltage source. |
| 8 | VDD | power_in | Positive power supply, 2.3V to 5.5V higher than VSS, and it needs bypass capacitors. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -2 | | 2 | µV | TA = +25°C (Note 1) | 3 |
| Input Offset Voltage Drift with Temperature (linear) | TC1 | -50 | | 50 | nV/°C | TA = -40 to +125°C (Note 1) | 3 |
| Power Supply Rejection | PSRR | 125 | 142 | | dB | (Note 1) | 3 |
| Input Bias Current across Temperature | IB | | 1.2 | 5 | nA | TA = +125°C | 3 |
| Common-Mode Input Voltage Range Low | VCML | | | -0.15 | V | VSS − 0.15 V (Note 2) | 4 |
| Common-Mode Input Voltage Range High | VCMH | 0.2 | | | V | VDD + 0.2 V (Note 2) | 4 |
| Common-Mode Rejection | CMRR | 120 | 136 | | dB | VDD = 2.3V, VCM = -0.15V to 2.5V (Note 1, Note 2) | 4 |
| Common-Mode Rejection | CMRR | 125 | 142 | | dB | VDD = 5.5V, VCM = -0.15V to 5.7V (Note 1, Note 2) | 4 |
| DC Open-Loop Gain | AOL | 125 | 147 | | dB | VDD = 2.3V, VOUT = 0.2V to 2.1V (Note 1) | 4 |
| DC Open-Loop Gain | AOL | 133 | 155 | | dB | VDD = 5.5V, VOUT = 0.2V to 5.3V (Note 1) | 4 |
| Minimum Output Voltage Swing | VOL | | 5 | 15 | mV | G = +2, 0.5V input overdrive; relative to VSS | 4 |
| Maximum Output Voltage Swing | VOH | -15 | -5 | | mV | G = +2, 0.5V input overdrive; relative to VDD | 4 |
| Supply Voltage | VDD | 2.3 | | 5.5 | V | | 4 |
| Quiescent Current per amplifier | IQ | 450 | 620 | 800 | µA | IO = 0 | 4 |
| POR Trip Voltage | VPOR | 1.15 | | 1.65 | V | | 4 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 6 |
| Operating Temperature Range | TA | -40 | | 125 | °C | (Note 1) | 6 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 6 |
| Thermal Resistance, 8L-SOIC | θJA | | 150 | | °C/W | | 6 |
| Current at Input Pins | | -2 | | 2 | mA | | 3 |
| Current at Output and Supply Pins | | -30 | | 30 | mA | | 3 |
| Storage Temperature | | -65 | | 150 | °C | | 3 |
| Max. Junction Temperature | TJ | | | 150 | °C | | 3 |
| Analog Inputs (VIN+ and VIN-) | | -1 | | 1 | V | VSS, 1.0V to VDD+1.0V (offsets relative to supply rails) | 3 |
| All other Inputs and Outputs | | -0.3 | | 0.3 | V | VSS, 0.3V to VDD+0.3V (offsets relative to supply rails) | 3 |
| Input Offset Voltage Quadratic Temperature Coefficient | TC2 | | 0.2 | | nV/°C² | TA = -40 to +125°C; printed ±0.2 | 3 |
| Gain Bandwidth Product | GBWP | | 2 | | MHz | | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | MS = Plastic Micro Small Outline Package, 8-lead SN = Plastic SOIC (150mil Body), 8-lead | 47 |
## CAD (KiCad official)
- Symbol: `MCP6V27-E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mcp6v27-e-etched.step` / `mcp6v27-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp6v27-e.step` / `mcp6v27-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp6v27-e-datasheet.pdf) (50 pp, sha256 `027e9159e010816a`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp6v27-e-datasheet.pdf)