main
Ray
Publish 0.1.0
e5e060d
MCP6V26-E
Microchip Tech · Pre-ordered MCUs · SOIC-8
MCP6V26-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection on the SOIC-8 MCP6V26 variant. |
| 2 | VIN- | power_in | Inverting input of the op amp, a high-impedance CMOS input with low bias currents. |
| 3 | VIN+ | power_in | Non-inverting input of the op amp, a high-impedance CMOS input with low bias currents; for normal operation the input stays between VSS and VDD. |
| 4 | VSS | power_in | Negative power supply; VDD is 2.3V to 5.5V higher than VSS, and in single-supply use VSS is connected to ground. |
| 5 | NC | unconnected | No internal connection on the SOIC-8 MCP6V26 variant. |
| 6 | VOUT | output | Analog output, a low-impedance voltage source of the op amp. |
| 7 | VDD | power_in | Positive power supply, 2.3V to 5.5V higher than VSS, which needs bypass capacitors. |
| 8 | NC | unconnected | No internal connection on the SOIC-8 MCP6V26 variant. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -2 | 2 | µV | TA = +25°C (Note 1) | 3 | |
| Input Offset Voltage Drift with Temperature (linear) | TC1 | -50 | 50 | nV/°C | TA = -40 to +125°C (Note 1) | 3 | |
| Power Supply Rejection | PSRR | 125 | 142 | dB | (Note 1) | 3 | |
| Common-Mode Rejection | CMRR | 120 | 136 | dB | VDD = 2.3V, VCM = -0.15V to 2.5V (Note 1, Note 2) | 4 | |
| Common-Mode Rejection | CMRR | 125 | 142 | dB | VDD = 5.5V, VCM = -0.15V to 5.7V (Note 1, Note 2) | 4 | |
| DC Open-Loop Gain (large signal) | AOL | 125 | 147 | dB | VDD = 2.3V, VOUT = 0.2V to 2.1V (Note 1) | 4 | |
| DC Open-Loop Gain (large signal) | AOL | 133 | 155 | dB | VDD = 5.5V, VOUT = 0.2V to 5.3V (Note 1) | 4 | |
| Supply Voltage | VDD | 2.3 | 5.5 | V | 4 | ||
| Quiescent Current per amplifier | IQ | 450 | 620 | 800 | µA | IO = 0 | 4 |
| POR Trip Voltage | VPOR | 1.15 | 1.65 | V | 4 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | (Note 1) | 6 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 6 | ||
| Thermal Resistance, 8L-SOIC | θJA | 150 | °C/W | 6 | |||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Max. Junction Temperature | TJ | 150 | °C | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | MS = Plastic Micro Small Outline Package, 8-lead SN = Plastic SOIC (150mil Body), 8-lead | 47 |
CAD (KiCad official)
- Symbol:
MCP6V26-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp6v26-e-etched.step/mcp6v26-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v26-e.step/mcp6v26-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
94b2ac66c521bd3c, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP6V26-E
**Microchip Tech** · Pre-ordered MCUs · SOIC-8
MCP6V26-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection on the SOIC-8 MCP6V26 variant. |
| 2 | VIN- | power_in | Inverting input of the op amp, a high-impedance CMOS input with low bias currents. |
| 3 | VIN+ | power_in | Non-inverting input of the op amp, a high-impedance CMOS input with low bias currents; for normal operation the input stays between VSS and VDD. |
| 4 | VSS | power_in | Negative power supply; VDD is 2.3V to 5.5V higher than VSS, and in single-supply use VSS is connected to ground. |
| 5 | NC | unconnected | No internal connection on the SOIC-8 MCP6V26 variant. |
| 6 | VOUT | output | Analog output, a low-impedance voltage source of the op amp. |
| 7 | VDD | power_in | Positive power supply, 2.3V to 5.5V higher than VSS, which needs bypass capacitors. |
| 8 | NC | unconnected | No internal connection on the SOIC-8 MCP6V26 variant. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -2 | | 2 | µV | TA = +25°C (Note 1) | 3 |
| Input Offset Voltage Drift with Temperature (linear) | TC1 | -50 | | 50 | nV/°C | TA = -40 to +125°C (Note 1) | 3 |
| Power Supply Rejection | PSRR | 125 | 142 | | dB | (Note 1) | 3 |
| Common-Mode Rejection | CMRR | 120 | 136 | | dB | VDD = 2.3V, VCM = -0.15V to 2.5V (Note 1, Note 2) | 4 |
| Common-Mode Rejection | CMRR | 125 | 142 | | dB | VDD = 5.5V, VCM = -0.15V to 5.7V (Note 1, Note 2) | 4 |
| DC Open-Loop Gain (large signal) | AOL | 125 | 147 | | dB | VDD = 2.3V, VOUT = 0.2V to 2.1V (Note 1) | 4 |
| DC Open-Loop Gain (large signal) | AOL | 133 | 155 | | dB | VDD = 5.5V, VOUT = 0.2V to 5.3V (Note 1) | 4 |
| Supply Voltage | VDD | 2.3 | | 5.5 | V | | 4 |
| Quiescent Current per amplifier | IQ | 450 | 620 | 800 | µA | IO = 0 | 4 |
| POR Trip Voltage | VPOR | 1.15 | | 1.65 | V | | 4 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 6 |
| Operating Temperature Range | TA | -40 | | 125 | °C | (Note 1) | 6 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 6 |
| Thermal Resistance, 8L-SOIC | θJA | | 150 | | °C/W | | 6 |
| Current at Input Pins | | -2 | | 2 | mA | | 3 |
| Current at Output and Supply Pins | | -30 | | 30 | mA | | 3 |
| Max. Junction Temperature | TJ | | | 150 | °C | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | MS = Plastic Micro Small Outline Package, 8-lead SN = Plastic SOIC (150mil Body), 8-lead | 47 |
## CAD (KiCad official)
- Symbol: `MCP6V26-E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mcp6v26-e-etched.step` / `mcp6v26-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp6v26-e.step` / `mcp6v26-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp6v26-e-datasheet.pdf) (50 pp, sha256 `94b2ac66c521bd3c`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp6v26-e-datasheet.pdf)