component
MCP6V16T-E
Public Made by Adomby adom
Microchip Tech Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6V16T-E
Microchip Tech · Operational Amplifier · SOT-23-5
MCP6V16T-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Op amp output, a low-impedance voltage source. |
| 2 | VSS | power_in | Negative power supply, with VDD 1.6V to 5.5V higher than VSS; usually connected to ground in single-supply use. |
| 3 | VIN+ | power_in | Noninverting input, a high-impedance CMOS input with low bias current, to be kept between VSS and VDD in normal operation. |
| 4 | VIN- | power_in | Inverting input, a high-impedance CMOS input with low bias current, to be kept between VSS and VDD in normal operation. |
| 5 | VDD | power_in | Positive power supply, 1.6V to 5.5V above VSS, and needs bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -25 | 25 | µV | TA = +25°C | 3 | |
| Input Offset Voltage Drift (Linear Temp. Co.) | TC1 | -150 | 150 | nV/°C | TA = -40 to +125°C (Note 1) | 3 | |
| Power Supply Rejection Ratio | PSRR | 108 | 135 | dB | 3 | ||
| Input Bias Current across Temperature | IB | 0 | 2.9 | 5 | nA | TA = +125°C | 3 |
| Input Offset Current across Temperature | IOS | -1 | 0.4 | 1 | nA | TA = +125°C | 3 |
| Common-Mode Rejection Ratio | CMRR | 98 | 125 | dB | VDD = 1.6V, VCM = -0.15V to 1.8V (Note 2) | 4 | |
| Common-Mode Rejection Ratio | CMRR | 109 | 135 | dB | VDD = 5.5V, VCM = -0.15V to 5.7V (Note 2) | 4 | |
| DC Open-Loop Gain (large signal) | AOL | 90 | 120 | dB | VDD = 1.6V, VOUT = 0.3V to 1.4V | 4 | |
| DC Open-Loop Gain (large signal) | AOL | 102 | 135 | dB | VDD = 5.5V, VOUT = 0.3V to 5.3V | 4 | |
| Supply Voltage | VDD | 1.6 | 5.5 | V | 4 | ||
| Quiescent Current per Amplifier | IQ | 4 | 7.5 | 11 | µA | IO = 0, MCP6V16/6U | 4 |
| POR Trip Voltage | VPOR | 0.9 | 1.5 | V | 4 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 5 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 5 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 5 | ||
| Supply Voltage (VDD - VSS) | VDD - VSS | 6.5 | V | 3 | |||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Thermal Resistance, 5L-SOT-23 | θJA | 201 | °C/W | 5 | |||
| Input Offset Voltage Quadratic Temp. Co. | TC2 | 0.08 | nV/°C² | TA = -40 to +125°C; printed ±0.08 | 3 | ||
| Input Bias Current | IB | 5 | pA | 3 | |||
| Gain Bandwidth Product | GBWP | 80 | kHz | 5 | |||
| Slew Rate | SR | 0.03 | V/µs | 5 | |||
| Phase Margin | PM | 70 | ° | G = +1 | 5 | ||
| Input Noise Voltage | Eni | 2.1 | µVP-P | f = 0.1 Hz to 10 Hz | 5 | ||
| Output Short Circuit Current | ISC | 17 | mA | VDD = 5.5V | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | gold | Body, 14-lead * Y = Nickel palladium gold manufacturing designator. Only | 49 |
CAD (KiCad official)
- Symbol:
MCP6V16T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6v16t-e-etched.step/mcp6v16t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6v16t-e.step/mcp6v16t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (52 pp, sha256
dd21a3206a919f8e, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).