component
MCP6L92T-E
Public Made by Adomby adom
Microchip Tech Operational Amplifier, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6L92T-E
Microchip Tech · Operational Amplifier · MSOP-8
MCP6L92T-E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Op Amp A analog output, which is a low-impedance voltage source. |
| 2 | VINA- | input | Op Amp A inverting input, a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Op Amp A noninverting input, a high-impedance CMOS input with low bias current. |
| 4 | VSS | power_in | Negative power supply; VDD must be 2.4V to 6.0V above VSS, and in single-supply use VSS is tied to ground. |
| 5 | VINB+ | input | Op Amp B noninverting input, a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Op Amp B inverting input, a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Op Amp B analog output, which is a low-impedance voltage source. |
| 8 | VDD | power_in | Positive power supply, 2.4V to 6.0V above VSS; VDD needs bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -4 | 1 | 4 | mV | 3 | |
| Common-mode Input Voltage Range | VCMR | -0.3 | 5.3 | V | 3 | ||
| Maximum Output Voltage Swing (low) | VOL | 0.02 | V | G = +2, 0.5V input overdrive | 3 | ||
| Maximum Output Voltage Swing (high) | VOH | 4.98 | V | G = +2, 0.5V input overdrive | 3 | ||
| Supply Voltage | VDD | 2.4 | 6 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 0.35 | 0.85 | 1.35 | mA | IO = 0 | 3 |
| Specified Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | (Note 1) | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| VDD, VSS | 7 | V | 3 | ||||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Analog Inputs (VIN+, VIN-) voltage range | VIN+, VIN- | -1 | 1 | V | Printed as VSS, 1.0V to VDD + 1.0V: min is relative to VSS, max is relative to VDD | 3 | |
| All Inputs and Outputs voltage range | -0.3 | 0.3 | V | Printed as VSS, 0.3V to VDD + 0.3V: min is relative to VSS, max is relative to VDD | 3 | ||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Max. Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Protection on All Pins (HBM) | 4 | kV | HBM | 3 | |||
| ESD Protection on All Pins (MM) | 400 | V | MM | 3 | |||
| Thermal Resistance, 8-Lead MSOP | JA | 206 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 25 |
CAD (KiCad official)
- Symbol:
MCP6L92T-E - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp6l92t-e-etched.step/mcp6l92t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6l92t-e.step/mcp6l92t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (40 pp, sha256
73510f453ba5d7c1, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).