component
MCP6L01UT-E
Public Made by Adomby adom
Microchip Tech Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MCP6L01UT-E
Microchip Tech · Operational Amplifier · SOT-23-5
MCP6L01UT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | power_in | Noninverting input of the op amp; a high-impedance CMOS input with low bias current, kept between VSS and VDD for normal operation. |
| 2 | VSS | power_in | Negative power supply, normally connected to ground in single-supply use; VDD is 1.8V to 6.0V above it. |
| 3 | VIN- | power_in | Inverting input of the op amp; a high-impedance CMOS input with low bias current, kept between VSS and VDD for normal operation. |
| 4 | VOUT | output | Op amp output, a low-impedance voltage source with rail-to-rail swing. |
| 5 | VDD | power_in | Positive power supply, 1.8V to 6.0V above VSS, and needs bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -5 | 1 | 5 | mV | TA = +25°C, VDD = 5.0V, VCM = VSS | 3 |
| Common-Mode Input Voltage Range | VCMR | -0.3 | 5.3 | V | VDD = 5.0V | 3 | |
| Output Voltage Swing Low | VOL | 0.035 | V | G = +2, 0.5V input overdrive | 3 | ||
| Output Voltage Swing High | VOH | 4.965 | V | G = +2, 0.5V input overdrive | 3 | ||
| Supply Voltage | VDD | 1.8 | 6 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 30 | 85 | 170 | µA | IO = 0 | 3 |
| Specified Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Analog Inputs (VIN+, VIN-) | -1 | 1 | V | VSS, 1.0V to VDD + 1.0V (relative to supplies) | 3 | ||
| All Inputs and Outputs | -0.3 | 0.3 | V | VSS, 0.3V to VDD + 0.3V (relative to supplies) | 3 | ||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Max. Junction Temperature | TJ | 150 | °C | 3 | |||
| ESD Protection HBM | 4 | kV | All pins, HBM | 3 | |||
| ESD Protection MM | 200 | V | All pins, MM | 3 | |||
| Thermal Resistance, 5-Lead SOT-23 | θJA | 256 | °C/W | 4 | |||
| Input Offset Voltage Drift | ΔVOS/ΔTA | 2 | µV/°C | TA = -40°C to +125°C | 3 | ||
| Power Supply Rejection Ratio | PSRR | 83 | dB | 3 | |||
| Input Bias Current | IB | 2 | pA | 3 | |||
| Input Bias Current Across Temperature | IB | 80 | pA | TA = +85°C | 3 | ||
| Input Bias Current Across Temperature | IB | 2000 | pA | TA = +125°C | 3 | ||
| Input Offset Current | IOS | 1 | pA | 3 | |||
| Common-Mode Rejection Ratio | CMRR | 78 | dB | VCM = -0.3V to 5.3V | 3 | ||
| DC Open-Loop Gain | AOL | 105 | dB | VOUT = 0.2V to 4.8V | 3 | ||
| Output Short-Circuit Current | ISC | 20 | mA | ±20 mA | 3 | ||
| Gain Bandwidth Product | GBWP | 1 | MHz | 4 | |||
| Phase Margin | PM | 90 | ° | G = +1 | 4 | ||
| Slew Rate | SR | 0.6 | V/µs | 4 | |||
| Input Noise Voltage | Eni | 6 | µVP-P | f = 0.1 Hz to 10 Hz | 4 | ||
| Input Noise Voltage Density | eni | 24 | nV/√Hz | f = 10 kHz | 4 | ||
| Input Noise Current Density | ini | 4 | fA/√Hz | f = 1 kHz | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 28 |
CAD (KiCad official)
- Symbol:
MCP6L01UT-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6l01ut-e-etched.step/mcp6l01ut-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6l01ut-e.step/mcp6l01ut-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (42 pp, sha256
5e69935e7eacc588, retrieved 2026-10-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP6L01UT-E
**Microchip Tech** · Operational Amplifier · SOT-23-5
MCP6L01UT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | power_in | Noninverting input of the op amp; a high-impedance CMOS input with low bias current, kept between VSS and VDD for normal operation. |
| 2 | VSS | power_in | Negative power supply, normally connected to ground in single-supply use; VDD is 1.8V to 6.0V above it. |
| 3 | VIN- | power_in | Inverting input of the op amp; a high-impedance CMOS input with low bias current, kept between VSS and VDD for normal operation. |
| 4 | VOUT | output | Op amp output, a low-impedance voltage source with rail-to-rail swing. |
| 5 | VDD | power_in | Positive power supply, 1.8V to 6.0V above VSS, and needs bypass capacitors. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -5 | 1 | 5 | mV | TA = +25°C, VDD = 5.0V, VCM = VSS | 3 |
| Common-Mode Input Voltage Range | VCMR | -0.3 | | 5.3 | V | VDD = 5.0V | 3 |
| Output Voltage Swing Low | VOL | | | 0.035 | V | G = +2, 0.5V input overdrive | 3 |
| Output Voltage Swing High | VOH | 4.965 | | | V | G = +2, 0.5V input overdrive | 3 |
| Supply Voltage | VDD | 1.8 | | 6 | V | | 3 |
| Quiescent Current per Amplifier | IQ | 30 | 85 | 170 | µA | IO = 0 | 3 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 4 |
| Operating Temperature Range | TA | -40 | | 125 | °C | Note 1 | 4 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |
| Current at Input Pins | | -2 | | 2 | mA | | 3 |
| Analog Inputs (VIN+, VIN-) | | -1 | | 1 | V | VSS, 1.0V to VDD + 1.0V (relative to supplies) | 3 |
| All Inputs and Outputs | | -0.3 | | 0.3 | V | VSS, 0.3V to VDD + 0.3V (relative to supplies) | 3 |
| Current at Output and Supply Pins | | -30 | | 30 | mA | | 3 |
| Max. Junction Temperature | TJ | | | 150 | °C | | 3 |
| ESD Protection HBM | | | | 4 | kV | All pins, HBM | 3 |
| ESD Protection MM | | | | 200 | V | All pins, MM | 3 |
| Thermal Resistance, 5-Lead SOT-23 | θJA | | 256 | | °C/W | | 4 |
| Input Offset Voltage Drift | ΔVOS/ΔTA | | 2 | | µV/°C | TA = -40°C to +125°C | 3 |
| Power Supply Rejection Ratio | PSRR | | 83 | | dB | | 3 |
| Input Bias Current | IB | | 2 | | pA | | 3 |
| Input Bias Current Across Temperature | IB | | 80 | | pA | TA = +85°C | 3 |
| Input Bias Current Across Temperature | IB | | 2000 | | pA | TA = +125°C | 3 |
| Input Offset Current | IOS | | 1 | | pA | | 3 |
| Common-Mode Rejection Ratio | CMRR | | 78 | | dB | VCM = -0.3V to 5.3V | 3 |
| DC Open-Loop Gain | AOL | | 105 | | dB | VOUT = 0.2V to 4.8V | 3 |
| Output Short-Circuit Current | ISC | | 20 | | mA | ±20 mA | 3 |
| Gain Bandwidth Product | GBWP | | 1 | | MHz | | 4 |
| Phase Margin | PM | | 90 | | ° | G = +1 | 4 |
| Slew Rate | SR | | 0.6 | | V/µs | | 4 |
| Input Noise Voltage | Eni | | 6 | | µVP-P | f = 0.1 Hz to 10 Hz | 4 |
| Input Noise Voltage Density | eni | | 24 | | nV/√Hz | f = 10 kHz | 4 |
| Input Noise Current Density | ini | | 4 | | fA/√Hz | f = 1 kHz | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 28 |
## CAD (KiCad official)
- Symbol: `MCP6L01UT-E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mcp6l01ut-e-etched.step` / `mcp6l01ut-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp6l01ut-e.step` / `mcp6l01ut-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/MCP6L01-1R-1U-2-4-1-MHz-85-uA-Op-Amps-DS20002140D.pdf) (42 pp, sha256 `5e69935e7eacc588`, retrieved 2026-10-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp6l01ut-e-datasheet.pdf)