main
Ray
mcp6l01t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero
d70965f
MCP6L01T-E
Microchip · Operational Amplifier · SOT-23-5
MCP6L01T-E from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Op amp analog output. Low-impedance voltage source with rail-to-rail swing, typically reaching within ~35 mV of each supply rail with a 10 kΩ load to VDD/2. |
| 2 | VSS | power_in | Negative power supply. Typically tied to ground in single-supply operation; must be at least 1.8V below VDD and no more than 6.0V below VDD. |
| 3 | VIN+ | input | Noninverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25°C; common-mode range extends from VSS−0.3V to VDD+0.3V. |
| 4 | VIN- | input | Inverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25°C; matched with VIN+ for low input-offset performance (±1 mV typ). |
| 5 | VDD | power_in | Positive power supply. 1.8V to 6.0V above VSS. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm plus a bulk 1 µF capacitor within 100 mm for proper operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MCP6L01T-EOTMCP6L01T-ELT
CAD (KiCad official)
- Symbol:
MCP6L01T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6l01t-e-etched.step/mcp6l01t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6l01t-e.step/mcp6l01t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip datasheet (38 pp, sha256
d8b011457763b65c, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP6L01T-E
**Microchip** · Operational Amplifier · SOT-23-5
MCP6L01T-E from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Op amp analog output. Low-impedance voltage source with rail-to-rail swing, typically reaching within ~35 mV of each supply rail with a 10 kΩ load to VDD/2. |
| 2 | VSS | power_in | Negative power supply. Typically tied to ground in single-supply operation; must be at least 1.8V below VDD and no more than 6.0V below VDD. |
| 3 | VIN+ | input | Noninverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25°C; common-mode range extends from VSS−0.3V to VDD+0.3V. |
| 4 | VIN- | input | Inverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25°C; matched with VIN+ for low input-offset performance (±1 mV typ). |
| 5 | VDD | power_in | Positive power supply. 1.8V to 6.0V above VSS. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm plus a bulk 1 µF capacitor within 100 mm for proper operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | SOT-23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `MCP6L01T-EOT`
- `MCP6L01T-ELT`
## CAD (KiCad official)
- Symbol: `MCP6L01T-E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mcp6l01t-e-etched.step` / `mcp6l01t-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp6l01t-e.step` / `mcp6l01t-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip datasheet](docs/mcp6l01t-e-datasheet.pdf) (38 pp, sha256 `d8b011457763b65c`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp6l01t-e-datasheet.pdf)