← Commit history
mcp6l01t-e: factory component page (tier=mfr)
3 files changed
+22−19
README.md+7−7@@ -8,11 +8,11 @@ MCP6L01T-E from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VOUT | output | Op-amp output. Low-impedance analog voltage source. Rail-to-rail output swings within ~35 mV of VSS/VDD into a 10 kΩ load at VDD = 5.0 V. Short-circuit current is typically ±20 mA. |-| 2 | VSS | power_in | Negative power supply pin. Typically tied to ground in single-supply operation. VDD − VSS must be between 1.8 V and 6.0 V (7.0 V absolute maximum). |-| 3 | VIN+ | input | Non-inverting analog input. High-impedance CMOS input (~10^13 Ω common-mode) with picoamp-level bias current. Rail-to-rail common-mode range extends from VSS − 0.3 V to VDD + 0.3 V. |-| 4 | VIN- | input | Inverting analog input. High-impedance CMOS input with picoamp-level bias current. Absolute-max input current ±2 mA; external series resistance is recommended when the input can be driven beyond the supply rails. |-| 5 | VDD | power_in | Positive power supply pin. 1.8 V to 6.0 V above VSS. Requires a 0.01-0.1 µF local bypass capacitor within 2 mm plus a bulk 1 µF cap within 100 mm of the pin. |+| 1 | VOUT | output | Op amp analog output. Low-impedance voltage source with rail-to-rail swing, typically reaching within ~35 mV of each supply rail with a 10 kΩ load to VDD/2. |+| 2 | VSS | power_in | Negative power supply. Typically tied to ground in single-supply operation; must be at least 1.8V below VDD and no more than 6.0V below VDD. |+| 3 | VIN+ | input | Noninverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25°C; common-mode range extends from VSS−0.3V to VDD+0.3V. |+| 4 | VIN- | input | Inverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25°C; matched with VIN+ for low input-offset performance (±1 mV typ). |+| 5 | VDD | power_in | Positive power supply. 1.8V to 6.0V above VSS. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm plus a bulk 1 µF capacitor within 100 mm for proper operation. | ## Key specifications @@ -25,8 +25,8 @@ MCP6L01T-E from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted ## Ordering variants -- `MCP6L01T-E/OT`-- `MCP6L01T-E/LT`+- `MCP6L01T-EOT`+- `MCP6L01T-ELT` ## CAD (KiCad official)
mcp6l01t-e.lbr+9−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Microchip Operational Amplifier, SOT-23-5</description> <packages> <package name="SOT-23-5"> <description>5 pads, 3.6 x 2.5 mm. SOT, 5 Pin</description>@@ -84,6 +84,7 @@ </packages> <symbols> <symbol name="MCP6L01T-E">+ <description>Microchip Operational Amplifier, SOT-23-5</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -99,7 +100,7 @@ </symbols> <devicesets> <deviceset name="MCP6L01T-E" prefix="U">- <description></description>+ <description>Microchip Operational Amplifier, SOT-23-5</description> <gates> <gate name="G$1" symbol="MCP6L01T-E" x="0" y="0"/> </gates>@@ -112,7 +113,12 @@ <connect gate="G$1" pin="VDD" pad="5"/> <connect gate="G$1" pin="VIN-" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="MCP6L01T-E" constant="no"/>+ <attribute name="MANUFACTURER" value="Microchip" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+6−9@@ -32,31 +32,31 @@ "number": "1", "name": "VOUT", "type": "output",- "description": "Op-amp output. Low-impedance analog voltage source. Rail-to-rail output swings within ~35 mV of VSS/VDD into a 10 kΩ load at VDD = 5.0 V. Short-circuit current is typically ±20 mA."+ "description": "Op amp analog output. Low-impedance voltage source with rail-to-rail swing, typically reaching within ~35 mV of each supply rail with a 10 k\u03a9 load to VDD/2." }, { "number": "2", "name": "VSS", "type": "power_in",- "description": "Negative power supply pin. Typically tied to ground in single-supply operation. VDD − VSS must be between 1.8 V and 6.0 V (7.0 V absolute maximum)."+ "description": "Negative power supply. Typically tied to ground in single-supply operation; must be at least 1.8V below VDD and no more than 6.0V below VDD." }, { "number": "3", "name": "VIN+", "type": "input",- "description": "Non-inverting analog input. High-impedance CMOS input (~10^13 Ω common-mode) with picoamp-level bias current. Rail-to-rail common-mode range extends from VSS − 0.3 V to VDD + 0.3 V."+ "description": "Noninverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25\u00b0C; common-mode range extends from VSS\u22120.3V to VDD+0.3V." }, { "number": "4", "name": "VIN-", "type": "input",- "description": "Inverting analog input. High-impedance CMOS input with picoamp-level bias current. Absolute-max input current ±2 mA; external series resistance is recommended when the input can be driven beyond the supply rails."+ "description": "Inverting analog input. High-impedance CMOS input with ~1 pA typical bias current at +25\u00b0C; matched with VIN+ for low input-offset performance (\u00b11 mV typ)." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive power supply pin. 1.8 V to 6.0 V above VSS. Requires a 0.01-0.1 µF local bypass capacitor within 2 mm plus a bulk 1 µF cap within 100 mm of the pin."+ "description": "Positive power supply. 1.8V to 6.0V above VSS. Requires a local 0.01-0.1 \u00b5F bypass capacitor within 2 mm plus a bulk 1 \u00b5F capacitor within 100 mm for proper operation." } ], "provenance": {@@ -120,8 +120,5 @@ "docs/mcp6l01t-e-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }