← Commit history
page.json+9−6@@ -32,31 +32,31 @@ "number": "1", "name": "VOUT", "type": "output",- "description": "Op-amp output. Low-impedance analog voltage source. Rail-to-rail output swings within ~35 mV of VSS/VDD into a 10 k\u03a9 load at VDD = 5.0 V. Short-circuit current is typically \u00b120 mA."+ "description": "Op-amp output. Low-impedance analog voltage source. Rail-to-rail output swings within ~35 mV of VSS/VDD into a 10 kΩ load at VDD = 5.0 V. Short-circuit current is typically ±20 mA." }, { "number": "2", "name": "VSS", "type": "power_in",- "description": "Negative power supply pin. Typically tied to ground in single-supply operation. VDD \u2212 VSS must be between 1.8 V and 6.0 V (7.0 V absolute maximum)."+ "description": "Negative power supply pin. Typically tied to ground in single-supply operation. VDD − VSS must be between 1.8 V and 6.0 V (7.0 V absolute maximum)." }, { "number": "3", "name": "VIN+", "type": "input",- "description": "Non-inverting analog input. High-impedance CMOS input (~10^13 \u03a9 common-mode) with picoamp-level bias current. Rail-to-rail common-mode range extends from VSS \u2212 0.3 V to VDD + 0.3 V."+ "description": "Non-inverting analog input. High-impedance CMOS input (~10^13 Ω common-mode) with picoamp-level bias current. Rail-to-rail common-mode range extends from VSS − 0.3 V to VDD + 0.3 V." }, { "number": "4", "name": "VIN-", "type": "input",- "description": "Inverting analog input. High-impedance CMOS input with picoamp-level bias current. Absolute-max input current \u00b12 mA; external series resistance is recommended when the input can be driven beyond the supply rails."+ "description": "Inverting analog input. High-impedance CMOS input with picoamp-level bias current. Absolute-max input current ±2 mA; external series resistance is recommended when the input can be driven beyond the supply rails." }, { "number": "5", "name": "VDD", "type": "power_in",- "description": "Positive power supply pin. 1.8 V to 6.0 V above VSS. Requires a 0.01-0.1 \u00b5F local bypass capacitor within 2 mm plus a bulk 1 \u00b5F cap within 100 mm of the pin."+ "description": "Positive power supply pin. 1.8 V to 6.0 V above VSS. Requires a 0.01-0.1 µF local bypass capacitor within 2 mm plus a bulk 1 µF cap within 100 mm of the pin." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/mcp6l01t-e-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }