main
Ray Publish 0.1.0 d9fdf38

MCP6476RT-E

Microchip Tech · Operational Amplifier · SOT-23-5

MCP6476RT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VOUT output Analog output pin is a low-impedance voltage source.
2 VDD power_in Positive power supply, 1.8V to 5.5V higher than VSS; VDD needs bypass capacitors.
3 VIN+ power_in Noninverting input is a high-impedance CMOS input with low bias current.
4 VIN- power_in Inverting input is a high-impedance CMOS input with low bias current.
5 VSS power_in Negative power supply; in typical single-supply use VSS is connected to ground.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Operational Amplifier/Comparator
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -1.6 1.6 mV 2
Input Offset Drift with Temperature VOS/TA -0.6 0.6 µV/°C TA= -40°C to +125°C 2
Power Supply Rejection Ratio PSRR 80 95 dB 2
Input Bias Current IB -1 1 pA 2
Input Offset Current IOS -1 1 pA 2
Common-Mode Rejection Ratio CMRR 50 76 dB VDD = 5.5V, VCM = -0.3V to 5.8V (MCP6476/6R/6U) 3
DC Open-Loop Gain (Large Signal) AOL 105 126 dB 0.2 < VOUT < (VDD, 0.2V) 3
Output Short-Circuit Current ISC -6 6 mA VDD = 1.8V 3
Output Short-Circuit Current ISC -30 30 mA VDD = 5.5V 3
Supply Voltage VDD 1.8 5.5 V 3
Quiescent Current per Amplifier IQ 140 170 µA IO = 0 3
Operating Temperature Range TA -40 125 °C Note 1 4
Thermal Resistance, 5-Lead SOT-23 θJA 221 °C/W 4
VDD, VSS VDD, VSS 6 V 2
Current at Analog Input Pins (VIN+, VIN-) IIN -5 5 mA 2
Storage Temperature TSTG -65 150 °C 2
Maximum Junction Temperature TJ 150 °C 2
ESD Protection on All Pins (HBM) ESD 3 kV HBM 2
ESD Protection on All Pins (CDM) ESD 2 kV CDM 2
ESD Protection on All Pins (MM) ESD 300 V MM 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead SOIC (MCP6477) SN 2031 21

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MCP6476RT-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp6476rt-e-ot-etched.step / mcp6476rt-e-ot-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6476rt-e-ot.step / mcp6476rt-e-ot.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (46 pp, sha256 893faa50a7796ddd, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF