3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP6294IDR
Texas Instruments · Operational Amplifier · SOIC-14
MCP6294IDR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output, channel A |
| 2 | -IN A | input | Inverting input, channel A |
| 3 | +IN A | input | Noninverting input, channel A |
| 4 | V+ | power_in | Positive (highest) supply |
| 5 | +IN B | input | Noninverting input, channel B |
| 6 | -IN B | input | Inverting input, channel B |
| 7 | OUT B | output | Output, channel B |
| 8 | OUT C | output | Output, channel C |
| 9 | -IN C | input | Inverting input, channel C |
| 10 | +IN C | input | Noninverting input, channel C |
| 11 | V- | power_in | Negative (lowest) supply or ground (for single-supply operation) |
| 12 | +IN D | input | Noninverting input, channel D |
| 13 | -IN D | input | Inverting input, channel D |
| 14 | OUT D | output | Output, channel D |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | 6 | V | 8 | ||||
| Signal input pins current | -10 | 10 | mA | 8 | |||
| Specified temperature (absolute maximum table) | TA | -40 | 125 | °C | Specified | 8 | |
| Junction temperature | TJ | 150 | °C | 8 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| ESD human-body model | V(ESD) HBM | -4000 | 4000 | V | Per ANSI/ESDA/JEDEC JS-001 | 8 | |
| ESD charged-device model | V(ESD) CDM | -1500 | 1500 | V | Per JEDEC JESD22-C101 | 8 | |
| Supply voltage | VS | 2.4 | 5.5 | V | 8 | ||
| Specified temperature (recommended operating) | -40 | 125 | °C | 8 | |||
| Input offset voltage | VOS | -3 | 0.3 | 3 | mV | VS = 5 V | 10 |
| Input offset voltage over temperature | VOS | -5 | 5 | mV | VS = 5 V, TA = –40°C to 125°C | 10 | |
| CMRR | CMRR | 80 | 103 | dB | VS = 5.5 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C | 10 | |
| CMRR | CMRR | 57 | 87 | dB | VS = 5.5 V, VCM = –0.1 V to 5.6 V, TA = –40°C to 125°C | 10 | |
| CMRR | CMRR | 88 | dB | VS = 2.4 V, (V–) – 0.1 V < VCM < (V+) – 1.4 V, TA = –40°C to 125°C | 10 | ||
| CMRR | CMRR | 81 | dB | VS = 2.4 V, VCM = –0.1 V to 1.9 V, TA = –40°C to 125°C | 10 | ||
| Open-loop voltage gain | AOL | 100 | dB | VS = 2.4 V, (V–) + 0.04 V < VO < (V+) – 0.04 V, RL = 10 kΩ | 10 | ||
| Open-loop voltage gain | AOL | 104 | 130 | dB | VS = 5.5 V, (V–) + 0.05 V < VO < (V+) – 0.05 V, RL = 10 kΩ | 10 | |
| Open-loop voltage gain | AOL | 130 | dB | VS = 5.5 V, (V–) + 0.15 V < VO < (V+) – 0.15 V, RL = 2 kΩ | 10 | ||
| Voltage output swing from supply rails | VO | 15 | mV | VS = 5.5 V, RL = 10 kΩ | 11 | ||
| Voltage output swing from supply rails | VO | 50 | mV | VS = 5.5 V, RL = 2 kΩ | 11 | ||
| Quiescent current per amplifier | IQ | 600 | 1300 | µA | VS = 5.5 V, IO = 0 mA | 11 | |
| Thermal resistance junction-to-ambient, D (SOIC) 14 pins | RθJA | 106.9 | °C/W | D (SOIC) 14-pin package | 9 | ||
| Thermal resistance junction-to-case (top), D (SOIC) 14 pins | RθJC(top) | 64 | °C/W | D (SOIC) 14-pin package | 9 | ||
| Thermal resistance junction-to-board, D (SOIC) 14 pins | RθJB | 63 | °C/W | D (SOIC) 14-pin package | 9 | ||
| Offset voltage drift | dVOS/dT | 1.1 | µV/°C | VS = 5 V, TA = –40°C to 125°C | 10 | ||
| Power-supply rejection ratio | PSRR | 7 | µV/V | VS = 2.4 V – 5.5 V, VCM = (V–) | 10 | ||
| Channel separation, DC | 100 | dB | At DC | 10 | |||
| Input bias current | IB | 1 | pA | 10 | |||
| Input offset current | IOS | 0.05 | pA | 10 | |||
| Input voltage noise (peak-to-peak) | En | 4.77 | µVPP | VS = 5 V, f = 0.1 Hz to 10 Hz | 10 | ||
| Input voltage noise density | en | 8.7 | nV/√Hz | VS = 5 V, f = 10 kHz, RL = 10 kΩ | 10 | ||
| Input voltage noise density | en | 16 | nV/√Hz | VS = 5 V, f = 1 kHz, RL = 10 kΩ | 10 | ||
| Input current noise density | in | 10 | fA/√Hz | f = 1 kHz | 10 | ||
| Differential input capacitance | CID | 2 | pF | Differential | 10 | ||
| Common-mode input capacitance | CIC | 4 | pF | Common-mode | 10 | ||
| Gain bandwidth product | GBP | 10 | MHz | VS = 5 V, G = 1 | 10 | ||
| Phase margin | φm | 55 | ° | VS = 5 V, G = 1 | 10 | ||
| Slew rate | SR | 6.5 | V/µs | VS = 5 V, G = 1 | 10 | ||
| Settling time to 0.1% | tS | 0.5 | µs | To 0.1%, VS = 5 V, 2-V step, G = 1, CL = 100 pF | 10 | ||
| Settling time to 0.01% | tS | 1 | µs | To 0.01%, VS = 5 V, 2-V step, G = 1, CL = 100 pF | 10 | ||
| Overload recovery time | tOR | 0.2 | µs | VS = 5 V, VIN × gain > VS | 10 | ||
| Total harmonic distortion + noise | THD + N | 0.0008 | % | VS = 5 V, VO = 1 VRMS, G = 1, f = 1 kHz | 11 | ||
| Short-circuit current | ISC | 50 | mA | VS = 5 V | 11 | ||
| Open-loop output impedance | ZO | 100 | Ω | VS = 5 V, f = 10 MHz | 11 |
CAD (KiCad official)
- Symbol:
MCP6294IDR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mcp6294idr-etched.step/mcp6294idr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6294idr.step/mcp6294idr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
4249decd61e600f1, retrieved 2026-10-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).