component

MCP6293T-E

Public Made by Adom

by adom

Microchip Tech Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiersmcp6293t-efactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 7d ago
viewers mcp6293t-e: viewers · Ray 7d ago
mcp6293t-e-etched.glb Publish 0.1.0 · Ray 7d ago
mcp6293t-e-etched.step mcp6293t-e: factory component page (tier=lcsc) · Ray 7d ago
mcp6293t-e-hero.glb mcp6293t-e: hero GLB from the etched model (keeps the MPN mark) · Ray 7d ago
mcp6293t-e-hero.overlay.json Publish 0.1.0 · Ray 7d ago
mcp6293t-e.glb Publish 0.1.0 · Ray 7d ago
mcp6293t-e.kicad_mod Publish 0.1.0 · Ray 7d ago
mcp6293t-e.kicad_sym Publish 0.1.0 · Ray 7d ago
mcp6293t-e.lbr Publish 0.1.0 · Ray 7d ago
mcp6293t-e.step Publish 0.1.0 · Ray 7d ago
package.json Publish 0.1.0 · Ray 7d ago
page.json Set visibility: public · Ray 7d ago
README.md Publish 0.1.0 · Ray 7d ago

MCP6293T-E

Microchip Tech · Operational Amplifier · SOT-23-6

MCP6293T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Analog output that acts as a low-impedance voltage source.
2 VSS power_in Negative power supply; VDD must be 2.4V to 6.0V above VSS, and in single-supply use VSS is connected to ground.
3 VIN+ power_in Noninverting input, a high-impedance CMOS input with low bias current that operates up to 0.3V past either supply rail.
4 VIN- power_in Inverting input, a high-impedance CMOS input with low bias current.
5 CS input CMOS Schmitt-triggered Chip Select input that places the part into a low-power mode of operation.
6 VDD power_in Positive power supply, 2.4V to 6.0V higher than VSS; bypass capacitors are needed.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Amplifiers
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -3 3 mV VCM = VSS (Note 1) 2
Power Supply Rejection Ratio PSRR 70 90 dB VCM = VSS (Note 1) 2
At Temperature Input Bias Current IB 50 200 pA TA = +85°C (Note 2) 2
At Temperature Input Bias Current IB 2 5 nA TA = +125°C (Note 2) 2
Common-mode Rejection Ratio CMRR 70 85 dB VCM = -0.3V to 2.5V, VDD = 5V 2
Common-mode Rejection Ratio CMRR 65 80 dB VCM = -0.3V to 5.3V, VDD = 5V 2
DC Open-Loop Gain (Large Signal) AOL 90 110 dB VOUT = 0.2V to VDD, 0.2V, VCM = VSS (Note 1) 3
Supply Voltage VDD 2.4 6 V TA = -40°C to +125°C (Note 5) 3
Quiescent Current per Amplifier IQ 0.7 1 1.3 mA IO = 0 3
CS Input Current, High ICSH 0.7 2 µA CS = VDD 4
CS Low to Valid Amplifier Output, Turn-on Time tON 4 10 µs CS Low 0.2 VDD, G = +1 V/V, VIN = VDD/2, VOUT = 0.9 VDD/2, VDD = 5.0V 4
Operating Temperature Range (E Temp) TA -40 125 °C 4
Storage Temperature Range TA -65 150 °C 4
VDD -VSS VDD-VSS 7 V 2
Current at Input Pins -2 2 mA 2
Current at Output and Supply Pins -30 30 mA 2
Maximum Junction Temperature TJ 155 °C 2
Input Offset Temperature Drift VOS/TA 1.7 µV/°C TA = -40°C to +125°C, VCM = VSS (Note 1) 2
Input Bias Current IB 1 pA Note 2 2
Input Offset Current IOS 1 pA Note 3 2
Short Circuit Current ISC 25 mA 3
Gain Bandwidth Product GBWP 10 MHz 3
Phase Margin at Unity-Gain PM 65 ° G = +1 V/V 3
Slew Rate SR 7 V/µs 3
Input Noise Voltage Eni 4.2 µVP-P f = 0.1 Hz to 10 Hz 3
Input Noise Voltage Density eni 8.7 nV/Hz f = 10 kHz 3
Input Noise Current Density ini 3 fA/Hz f = 1 kHz 3
CS Input Current, Low ICSL 0.01 µA CS = VSS 4
GND Current per Amplifier ISS -0.7 µA CS = VDD 4
Amplifier Output Leakage 0.01 µA CS = VDD 4
CS High to Amplifier Output High-Z tOFF 0.01 µs CS High 0.8 VDD, G = +1 V/V, VIN = VDD/2, VOUT = 0.1 VDD/2 4
Hysteresis VHYST 0.6 V VDD = 5V 4
Thermal Resistance, 6L-SOT-23 θJA 230 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 35

CAD (KiCad official)

  • Symbol: MCP6293T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mcp6293t-e-etched.step / mcp6293t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6293t-e.step / mcp6293t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (50 pp, sha256 b4c69e9fb0a9da55, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF