main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6291t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
mcp6291t-e-etched.fit.json mcp6291t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6291t-e-etched.glb mcp6291t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6291t-e-etched.step mcp6291t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6291t-e-hero.glb mcp6291t-e: hero from the plain model · Ray
mcp6291t-e-hero.overlay.json mcp6291t-e: hero from the plain model · Ray
mcp6291t-e.glb Publish 0.1.0 · Ray
mcp6291t-e.kicad_mod Publish 0.1.0 · Ray
mcp6291t-e.kicad_sym symbol: the part is a 5-lead SOT-23 - the shipped footprint has 5 pads and the datasheet confirms it for this ordering… · Ray
mcp6291t-e.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
mcp6291t-e.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
pads.json symbol: the part is a 5-lead SOT-23 - the shipped footprint has 5 pads and the datasheet confirms it for this ordering… · Ray
page.json Publish 0.2.1 · Ray
README.md mcp6291t-e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MCP6291T-E

Microchip · Operational Amplifier · SOT-23-5

MCP6291T-E from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection. Pad may be left floating; not electrically bonded to the die.
2 VIN- input Inverting analog input of the op amp. High-impedance CMOS input with typical bias current of ±1 pA. Common-mode input range extends from VSS - 0.3V to VDD + 0.3V.
3 VIN+ input Non-inverting analog input of the op amp. High-impedance CMOS input with typical bias current of ±1 pA. Rail-to-rail input capability across the supply range.
4 VSS power_in Negative power supply pin. Tied to ground in single-supply configuration. Must be 2.4V to 6.0V below VDD.
5 NC unconnected No internal connection. Pad may be left floating; not electrically bonded to the die.
6 VOUT output Low-impedance analog output. Rail-to-rail output swing (typically within 15 mV of the supply rails with a 10 kΩ load). Short-circuit current ±25 mA.
7 VDD power_in Positive power supply pin, 2.4V to 6.0V above VSS. Quiescent current 1.0 mA typical per amplifier. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm plus a bulk 1 µF within 100 mm.
8 NC unconnected No internal connection. Pad may be left floating; not electrically bonded to the die.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOT-23-5
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MCP6291T-ESN
  • MCP6291T-EP
  • MCP6291T-EMS
  • MCP6291T-EOT

CAD (KiCad official)

  • Symbol: MCP6291T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp6291t-e-etched.step / mcp6291t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6291t-e.step / mcp6291t-e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6291t-e.step 85 KB You want the bare part, or you mark your own boards.
mcp6291t-e-etched.step 1.7 MB You want the part with MCP6291T-E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 424 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (36 pp, sha256 55213facea60c43a, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF