component
MCP6291T-E
Public Made by Adomby adom
Microchip Operational Amplifier, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -38,13 +38,13 @@ "number": "2", "name": "VIN-", "type": "input",- "description": "Inverting analog input of the op amp. High-impedance CMOS input with typical bias current of \u00b11 pA. Common-mode input range extends from VSS - 0.3V to VDD + 0.3V."+ "description": "Inverting analog input of the op amp. High-impedance CMOS input with typical bias current of ±1 pA. Common-mode input range extends from VSS - 0.3V to VDD + 0.3V." }, { "number": "3", "name": "VIN+", "type": "input",- "description": "Non-inverting analog input of the op amp. High-impedance CMOS input with typical bias current of \u00b11 pA. Rail-to-rail input capability across the supply range."+ "description": "Non-inverting analog input of the op amp. High-impedance CMOS input with typical bias current of ±1 pA. Rail-to-rail input capability across the supply range." }, { "number": "4",@@ -62,13 +62,13 @@ "number": "6", "name": "VOUT", "type": "output",- "description": "Low-impedance analog output. Rail-to-rail output swing (typically within 15 mV of the supply rails with a 10 k\u03a9 load). Short-circuit current \u00b125 mA."+ "description": "Low-impedance analog output. Rail-to-rail output swing (typically within 15 mV of the supply rails with a 10 kΩ load). Short-circuit current ±25 mA." }, { "number": "7", "name": "VDD", "type": "power_in",- "description": "Positive power supply pin, 2.4V to 6.0V above VSS. Quiescent current 1.0 mA typical per amplifier. Requires a local 0.01-0.1 \u00b5F bypass capacitor within 2 mm plus a bulk 1 \u00b5F within 100 mm."+ "description": "Positive power supply pin, 2.4V to 6.0V above VSS. Quiescent current 1.0 mA typical per amplifier. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm plus a bulk 1 µF within 100 mm." }, { "number": "8",@@ -138,5 +138,8 @@ "docs/mcp6291t-e-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }