component

MCP6283T-E

Public Made by Adom

by adom

Microchip Tech Operational Amplifier, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentoperational amplifier-comparatormcp6283t-efactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP6283T-E

Microchip Tech · Operational Amplifier · SOT-23-6

MCP6283T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Analog output; the datasheet describes the output pins as low-impedance voltage sources.
2 VSS power_in Negative power supply; in typical single-supply use VSS is connected to ground.
3 VIN+ power_in Non-inverting input, a high-impedance CMOS input with low bias current; common mode input range is VDD + 300 mV to VSS - 300 mV.
4 VIN- power_in Inverting input, a high-impedance CMOS input with low bias current.
5 CS input CMOS Schmitt-triggered chip select input that places the part into low-power mode.
6 VDD power_in Positive power supply, 2.2V to 6.0V higher than VSS; VDD needs bypass capacitors.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Operational Amplifier/Comparator
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -3 3 mV VCM = VSS (Note 1) 2
Input Offset Voltage (Extended Temperature) VOS -5 5 mV TA= -40°C to +125°C, VCM = VSS (Note 1) 2
Power Supply Rejection Ratio PSRR 70 90 dB VCM = VSS (Note 1) 2
Input Bias Current at TA=+85°C IB 50 200 pA TA= +85°C (Note 2) 2
Input Bias Current at TA=+125°C IB 2 5 nA TA= +125°C (Note 2) 2
Common Mode Rejection Ratio CMRR 70 85 dB VCM = -0.3V to 2.5V, VDD = 5V 2
Common Mode Rejection Ratio CMRR 65 80 dB VCM = -0.3V to 5.3V, VDD = 5V 2
DC Open-Loop Gain (Large Signal) AOL 90 110 dB VOUT = 0.2V to VDD, 0.2V, VCM =VSS (Note 1) 2
Supply Voltage VDD 2.2 6 V (Note 5) 2
Quiescent Current per Amplifier IQ 300 450 570 µA IO = 0 2
CS High Input Current ICSH 0.7 2 µA CS = VDD 3
CS Low to Valid Amplifier Output, Turn-on Time tON 4 10 µs CS Low 0.2 VDD, G = +1 V/V, VIN = VDD/2, VOUT = 0.9 VDD/2, VDD = 5.0V 3
Operating Temperature Range TA -40 125 °C 4
Storage Temperature Range TA -65 150 °C 4
Thermal Resistance, 6L-SOT-23 JA 230 °C/W 4
Current at Input Pins -2 2 mA 2
Current at Output and Supply Pins -30 30 mA 2
Maximum Junction Temperature TJ 150 °C 2
ESD Protection On All Pins (HBM) 4 kV HBM 2
ESD Protection On All Pins (MM) 400 V MM 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 33

CAD (KiCad official)

  • Symbol: MCP6283T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mcp6283t-e-etched.step / mcp6283t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6283t-e.step / mcp6283t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (48 pp, sha256 39a5606ae834d041, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF