MCP6282T-E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	VOUTA	output	Analog output of op amp A, which is a low-impedance voltage source.
2	VINA-	input	Inverting input of op amp A, a high-impedance CMOS input with low bias current.
3	VINA+	input	Non-inverting input of op amp A, a high-impedance CMOS input with low bias current.
4	VSS	power_in	Negative power supply; in single-supply use it is connected to ground, and all other pins must stay between VSS and VDD.
5	VINB+	input	Non-inverting input of op amp B, a high-impedance CMOS input with low bias current.
6	VINB-	input	Inverting input of op amp B, a high-impedance CMOS input with low bias current.
7	VOUTB	output	Analog output of op amp B, which is a low-impedance voltage source.
8	VDD	power_in	Positive power supply, 2.2V to 6.0V higher than VSS, which needs bypass capacitors.

Key specifications

Parameter	Value
Manufacturer	Microchip Tech
Package	MSOP-8
Category	Operational Amplifier/Comparator
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Offset Voltage	VOS	-3		3	mV	VCM = VSS (Note 1)	2
Input Offset Voltage (Extended Temperature)	VOS	-5		5	mV	TA= -40°C to +125°C, VCM = VSS (Note 1)	2
Power Supply Rejection Ratio	PSRR	70	90		dB	VCM = VSS (Note 1)	2
Input Bias Current at TA=+85°C	IB		50	200	pA	TA= +85°C (Note 2)	2
Input Bias Current at TA=+125°C	IB		2	5	nA	TA= +125°C (Note 2)	2
Common Mode Rejection Ratio	CMRR	70	85		dB	VCM = -0.3V to 2.5V, VDD = 5V	2
Common Mode Rejection Ratio	CMRR	65	80		dB	VCM = -0.3V to 5.3V, VDD = 5V	2
DC Open-Loop Gain (Large Signal)	AOL	90	110		dB	VOUT = 0.2V to VDD, 0.2V, VCM =VSS (Note 1)	2
Supply Voltage	VDD	2.2		6	V	(Note 5)	2
Quiescent Current per Amplifier	IQ	300	450	570	µA	IO = 0	2
Operating Temperature Range	TA	-40		125	°C	Note	4
Current at Input Pins		-2		2	mA		2
Current at Output and Supply Pins		-30		30	mA		2
Storage Temperature		-65		150	°C		2
Maximum Junction Temperature	TJ			150	°C		2
ESD Protection on All Pins (HBM)	HBM	4			kV	HBM	2
ESD Protection on All Pins (MM)	MM	400			V	MM	2
Thermal Resistance, 8L-MSOP	JA		206		°C/W		4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
contacts		tin	8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2	33

CAD (KiCad official)

Symbol: MCP6282T-E
Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
3D model: MSOP-8 (KiCad packages3D, STEP)
3D model files: mcp6282t-e-etched.step / mcp6282t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6282t-e.step / mcp6282t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Microchip Tech datasheet (48 pp, sha256 39a5606ae834d041, retrieved 2026-11-05, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

MCP6282T-E

Verified MCP6282T-E

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README