main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp6273t-e-ch: viewers rendered from the public page · Ray
mcp6273t-e-ch-etched.glb mcp6273t-e-ch: factory component page (tier=mfr) · Ray
mcp6273t-e-ch-etched.step mcp6273t-e-ch: factory component page (tier=mfr) · Ray
mcp6273t-e-ch-hero.glb mcp6273t-e-ch: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp6273t-e-ch-hero.overlay.json mcp6273t-e-ch: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp6273t-e-ch.glb Publish 0.1.0 · Ray
mcp6273t-e-ch.kicad_mod Publish 0.1.0 · Ray
mcp6273t-e-ch.kicad_sym Publish 0.1.0 · Ray
mcp6273t-e-ch.lbr Publish 0.1.0 · Ray
mcp6273t-e-ch.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

MCP6273T-E

Microchip Tech · Operational Amplifier · SOT-23-6

MCP6273T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VOUT output Analog output that acts as a low-impedance voltage source.
2 VSS power_in Negative power supply; VDD must be 2.0V to 6.0V higher than VSS, and for single-supply use VSS is connected to ground.
3 VIN+ power_in Non-inverting analog input, a high-impedance CMOS input with low bias current.
4 VIN- power_in Inverting analog input, a high-impedance CMOS input with low bias current.
5 CS input CMOS, Schmitt-triggered chip select digital input that places the part into a low-power mode of operation.
6 VDD power_in Positive power supply, 2.0V to 6.0V above VSS; VDD needs bypass capacitors.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Operational Amplifier/Comparator
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -3 3 mV VCM = VSS 3
Input Offset Voltage (Extended Temperature) VOS -5 5 mV TA = -40°C to +125°C, VCM = VSS 3
Power Supply Rejection Ratio PSRR 70 90 dB VCM = VSS 3
Input Bias Current at +85°C IB 50 200 pA TA= +85°C (Note 2) 3
Input Bias Current at +125°C IB 2 5 nA TA= +125°C (Note 2) 3
Common Mode Rejection Ratio CMRR 70 85 dB VCM = -0.3V to 2.5V, VDD = 5V (Note 6) 4
Common Mode Rejection Ratio CMRR 65 80 dB VCM = -0.3V to 5.3V, VDD = 5V (Note 6) 4
DC Open-Loop Gain (Large Signal) AOL 90 110 dB VOUT = 0.2V to VDD, 0.2V, VCM = VSS (Note 1) 4
Supply Voltage VDD 2 6 V 4
Quiescent Current per Amplifier IQ 100 170 240 µA IO = 0A 4
Specified Temperature Range TA -40 125 °C 5
Operating Temperature Range TA -40 125 °C Note 5
Storage Temperature Range TA -65 150 °C 5
CS Input Current, High ICSH 0.7 2 µA CS = VDD 5
Amplifier Output Leakage 0.01 µA CS = VDD 5
CS Low to Valid Amplifier Output, Turn on Time tON 4 10 µs CS Low 0.2 VDD, G = +1 V/V, VIN = VDD/2, VOUT = 0.9 VDD/2, VDD = 5.0V 5
VDD, VSS VDD, VSS 7 V 3
Current at Input Pins -2 2 mA 3
Current at Output and Supply Pins -30 30 mA 3
Junction Temperature TJ 150 °C 3
ESD Protection On All Pins (HBM) 4 kV 3
ESD Protection On All Pins (MM) 400 V 3
Thermal Resistance, 6L-SOT-23 θJA 230 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 37

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MCP6273T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp6273t-e-ch-etched.step / mcp6273t-e-ch-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6273t-e-ch.step / mcp6273t-e-ch.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (54 pp, sha256 1193ea095928d335, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF