main
Ray
Publish 0.1.0
8617233
MCP6241-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
MCP6241-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | VIN- | power_in | Inverting input; high-impedance CMOS input with low bias current. |
| 3 | VIN+ | power_in | Non-inverting input; high-impedance CMOS input with low bias current. |
| 4 | VSS | power_in | Negative power supply, normally connected to ground in single-supply use. |
| 5 | NC | unconnected | No internal connection. |
| 6 | VOUT | output | Analog output; low-impedance voltage source. |
| 7 | VDD | power_in | Positive power supply, 1.8V to 5.5V above VSS, needs bypass capacitors. |
| 8 | NC | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -5 | 5 | mV | VCM = VSS | 3 | |
| Input Offset Voltage, Extended Temperature | VOS | -7 | 7 | mV | TA= -40°C to +125°C, VCM = VSS (Note 1) | 3 | |
| Common Mode Input Range | VCMR | -0.3 | 0.3 | V | VSS, 0.3 to VDD + 0.3 (min is VSS, 0.3, max is VDD + 0.3) | 3 | |
| Common Mode Rejection Ratio | CMRR | 60 | 75 | dB | VCM = -0.3V to 5.3V, VDD = 5V | 3 | |
| DC Open-Loop Gain (large signal) | AOL | 90 | 110 | dB | VOUT = 0.3V to VDD, 0.3V, VCM =VSS | 3 | |
| Maximum Output Voltage Swing | VOL, VOH | 35 | 35 | mV | RL = 10 kΩ, 0.5V Input Overdrive; min VSS + 35 mV, max VDD, 35 mV | 3 | |
| Supply Voltage | VDD | 1.8 | 5.5 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 30 | 50 | 70 | µA | IO = 0, VCM = VDD, 0.5V | 3 |
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Supply Voltage (VDD-VSS) | VDD-VSS | 7 | V | 3 | |||
| Current at Analog Input Pins | -2 | 2 | mA | VIN+, VIN- | 3 | ||
| Current at Output and Supply Pins | -30 | 30 | mA | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature (abs max) | -65 | 150 | °C | 3 | |||
| Thermal Resistance, 8L-SOIC | θJA | 163 | °C/W | 4 | |||
| Input Offset Drift with Temperature | ΔVOS/ΔTA | 3 | µV/°C | TA= -40°C to +125°C, VCM = VSS (±3.0 printed) | 3 | ||
| Power Supply Rejection | PSRR | 83 | dB | VCM = VSS | 3 | ||
| Output Short-Circuit Current | ISC | 6 | mA | VDD = 1.8V (±6 printed) | 3 | ||
| Output Short-Circuit Current | ISC | 23 | mA | VDD = 5.5V (±23 printed) | 3 | ||
| Gain Bandwidth Product | GBWP | 550 | kHz | 4 | |||
| Phase Margin | PM | 68 | ° | G = +1 V/V | 4 | ||
| Slew Rate | SR | 0.3 | V/µs | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | SN = Plastic SOIC (150 mil Body), 8-lead SL = Plastic SOIC (150 mil Body), 14-lead | 35 |
CAD (KiCad official)
- Symbol:
MCP6241-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp6241-e-etched.step/mcp6241-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6241-e.step/mcp6241-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (38 pp, sha256
550df3783947fdaa, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP6241-E
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
MCP6241-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection. |
| 2 | VIN- | power_in | Inverting input; high-impedance CMOS input with low bias current. |
| 3 | VIN+ | power_in | Non-inverting input; high-impedance CMOS input with low bias current. |
| 4 | VSS | power_in | Negative power supply, normally connected to ground in single-supply use. |
| 5 | NC | unconnected | No internal connection. |
| 6 | VOUT | output | Analog output; low-impedance voltage source. |
| 7 | VDD | power_in | Positive power supply, 1.8V to 5.5V above VSS, needs bypass capacitors. |
| 8 | NC | unconnected | No internal connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -5 | | 5 | mV | VCM = VSS | 3 |
| Input Offset Voltage, Extended Temperature | VOS | -7 | | 7 | mV | TA= -40°C to +125°C, VCM = VSS (Note 1) | 3 |
| Common Mode Input Range | VCMR | -0.3 | | 0.3 | V | VSS, 0.3 to VDD + 0.3 (min is VSS, 0.3, max is VDD + 0.3) | 3 |
| Common Mode Rejection Ratio | CMRR | 60 | 75 | | dB | VCM = -0.3V to 5.3V, VDD = 5V | 3 |
| DC Open-Loop Gain (large signal) | AOL | 90 | 110 | | dB | VOUT = 0.3V to VDD, 0.3V, VCM =VSS | 3 |
| Maximum Output Voltage Swing | VOL, VOH | 35 | | 35 | mV | RL = 10 kΩ, 0.5V Input Overdrive; min VSS + 35 mV, max VDD, 35 mV | 3 |
| Supply Voltage | VDD | 1.8 | | 5.5 | V | | 3 |
| Quiescent Current per Amplifier | IQ | 30 | 50 | 70 | µA | IO = 0, VCM = VDD, 0.5V | 3 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 4 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |
| Supply Voltage (VDD-VSS) | VDD-VSS | | | 7 | V | | 3 |
| Current at Analog Input Pins | | -2 | | 2 | mA | VIN+, VIN- | 3 |
| Current at Output and Supply Pins | | -30 | | 30 | mA | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Storage Temperature (abs max) | | -65 | | 150 | °C | | 3 |
| Thermal Resistance, 8L-SOIC | θJA | | 163 | | °C/W | | 4 |
| Input Offset Drift with Temperature | ΔVOS/ΔTA | | 3 | | µV/°C | TA= -40°C to +125°C, VCM = VSS (±3.0 printed) | 3 |
| Power Supply Rejection | PSRR | | 83 | | dB | VCM = VSS | 3 |
| Output Short-Circuit Current | ISC | | 6 | | mA | VDD = 1.8V (±6 printed) | 3 |
| Output Short-Circuit Current | ISC | | 23 | | mA | VDD = 5.5V (±23 printed) | 3 |
| Gain Bandwidth Product | GBWP | | 550 | | kHz | | 4 |
| Phase Margin | PM | | 68 | | ° | G = +1 V/V | 4 |
| Slew Rate | SR | | 0.3 | | V/µs | | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | SN = Plastic SOIC (150 mil Body), 8-lead SL = Plastic SOIC (150 mil Body), 14-lead | 35 |
## CAD (KiCad official)
- Symbol: `MCP6241-E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mcp6241-e-etched.step` / `mcp6241-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp6241-e.step` / `mcp6241-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp6241-e-datasheet.pdf) (38 pp, sha256 `550df3783947fdaa`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp6241-e-datasheet.pdf)