main
History Download
Ray mcp6232t-e-sn: renamed from mcp6232t-e, the part it was built from (MCP6232T-E/SN); family listed 96060d4

MCP6232T-E/SN

Microchip · Operational Amplifier · SOIC-8

MCP6232T-E from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of Op Amp A. Low-impedance voltage source; output swings from VSS + 35 mV to VDD - 35 mV with a 10 kOhm load to VDD/2.
2 VINA- input Inverting analog input of Op Amp A. High-impedance CMOS input with typical bias current of +/-1 pA at +25 C.
3 VINA+ input Non-inverting analog input of Op Amp A. High-impedance CMOS input; common-mode range VSS - 0.3 V to VDD + 0.3 V.
4 VSS power_in Negative power supply (ground in single-supply use). Must be 1.8 V to 6.0 V below VDD.
5 VINB+ input Non-inverting analog input of Op Amp B. High-impedance CMOS input; common-mode range VSS - 0.3 V to VDD + 0.3 V.
6 VINB- input Inverting analog input of Op Amp B. High-impedance CMOS input with typical bias current of +/-1 pA at +25 C.
7 VOUTB output Analog output of Op Amp B. Low-impedance voltage source; output swings from VSS + 35 mV to VDD - 35 mV with a 10 kOhm load to VDD/2.
8 VDD power_in Positive power supply, 1.8 V to 6.0 V (referenced to VSS). Requires a local 0.01 uF to 0.1 uF bypass capacitor within 2 mm and a bulk 1 uF capacitor within 100 mm.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MCP6232T-E/MS
  • MCP6232T-E/SN
  • MCP6232-E/P
  • MCP6232-I/P
  • MCP6232T-E/MNY

CAD (KiCad official)

  • Symbol: MCP6232T-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp6232t-e-etched.step / mcp6232t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6232t-e.step / mcp6232t-e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6232t-e.step 122 KB You want the bare part, or you mark your own boards.
mcp6232t-e-etched.step 2.0 MB You want the part with MCP6232T-E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 497 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (52 pp, sha256 dd66ca9f54b81dc2, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP6232T-E/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP6232T-E/MS
  • MCP6232T-E/SN-HXY