main
Ray
mcp6231ut-e-lt: renamed from mcp6231ut-e, the part it was built from (MCP6231UT-E/LT); family listed
759c893
MCP6231UT-E/LT
Microchip · Operational Amplifier · SC-70-5
MCP6231UT-E from Microchip, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | input | Non-inverting analog input. High-impedance CMOS input with typical bias current of ±1 pA. Common-mode input range extends from VSS - 0.3 V to VDD + 0.3 V (rail-to-rail). |
| 2 | VSS | power_in | Negative power supply / ground reference. Typically tied to system ground in single-supply operation; VDD - VSS must be between 1.8 V and 6.0 V (7.0 V absolute maximum). |
| 3 | VIN- | input | Inverting analog input. High-impedance CMOS input with typical bias current of ±1 pA. Differential input impedance ~10^13 Ω |
| 4 | VOUT | output | Rail-to-rail analog output. Low-impedance voltage source; swings within 35 mV of either rail with a 10 kΩ load. Short-circuit current ±6 mA at VDD = 1.8 V, ±23 mA at VDD = 5.5 V. |
| 5 | VDD | power_in | Positive power supply. 1.8 V to 6.0 V referenced to VSS. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm and optionally a 1 µF bulk capacitor within 100 mm. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
MCP6231UT-ELTMCP6231UT-EOTMCP6231UT-EMNY
CAD (KiCad official)
- Symbol:
MCP6231UT-E - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6231ut-e-etched.step/mcp6231ut-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6231ut-e.step/mcp6231ut-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip datasheet (40 pp, sha256
aed907562ec5cabc, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is MCP6231UT-E/LT. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP6231UT-E/OT
# MCP6231UT-E/LT
**Microchip** · Operational Amplifier · SC-70-5
MCP6231UT-E from Microchip, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN+ | input | Non-inverting analog input. High-impedance CMOS input with typical bias current of ±1 pA. Common-mode input range extends from VSS - 0.3 V to VDD + 0.3 V (rail-to-rail). |
| 2 | VSS | power_in | Negative power supply / ground reference. Typically tied to system ground in single-supply operation; VDD - VSS must be between 1.8 V and 6.0 V (7.0 V absolute maximum). |
| 3 | VIN- | input | Inverting analog input. High-impedance CMOS input with typical bias current of ±1 pA. Differential input impedance ~10^13 Ω || 3 pF. |
| 4 | VOUT | output | Rail-to-rail analog output. Low-impedance voltage source; swings within 35 mV of either rail with a 10 kΩ load. Short-circuit current ±6 mA at VDD = 1.8 V, ±23 mA at VDD = 5.5 V. |
| 5 | VDD | power_in | Positive power supply. 1.8 V to 6.0 V referenced to VSS. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm and optionally a 1 µF bulk capacitor within 100 mm. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip |
| Package | SC-70-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `MCP6231UT-ELT`
- `MCP6231UT-EOT`
- `MCP6231UT-EMNY`
## CAD (KiCad official)
- Symbol: `MCP6231UT-E`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files: `mcp6231ut-e-etched.step` / `mcp6231ut-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp6231ut-e.step` / `mcp6231ut-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip datasheet](docs/mcp6231ut-e-datasheet.pdf) (40 pp, sha256 `aed907562ec5cabc`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp6231ut-e-datasheet.pdf)
## Other parts in this family
This page is **MCP6231UT-E/LT**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- MCP6231UT-E/OT