← Commit history

Initial commit: component/mcp62

Ray ·ab303459fe ·
2 files changed +99
README.mdadded+65
@@ -0,0 +1,65 @@+# MCP62++**Mysentech** · Float Level Senors · QSOP-24++MCP62 from Mysentech, in a QSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C1A | passive | Channel 1 capacitor input (analog). Positive terminal of the sensing capacitor for channel 1; connects to the external inductor L / sensing capacitor Cp network. |+| 2 | C1B | passive | Channel 1 capacitor ground (analog). Negative/return terminal of the channel-1 sensing capacitor; internally tied to GNDA through the chip in dual-electrode mode. |+| 3 | VC | passive | Reference voltage pin for the capacitive AFE. Typically bypassed with an external decoupling capacitor. |+| 4 | VT | passive | Temperature-sensing voltage pin (analog). Used together with the on-chip temperature sensor for temperature compensation. |+| 5 | RUP | passive | External resistor pin (standard I/O, TC level). Sets the AFE drive/pull-up current via an external resistor to VDD. |+| 6 | GND | power_in | Digital ground return, 0 V reference for the digital core and I/O. |+| 7 | PA15 | bidirectional | General-purpose I/O PA15 (standard TC-level I/O, input tolerant to VDD). Alt functions: SPI1_NSS, TIM1_CH3N, SPI1_MOSI, TIM3_CH3; ADC1_VIN[6] additional analog input. |+| 8 | PA2 | bidirectional | General-purpose I/O PA2 (standard TC I/O). Alt functions: TIM1_CH2N, SPI1_MISO, TIM3_CH2; ADC1_VIN[5] additional analog input. |+| 9 | PA12 | bidirectional | General-purpose I/O PA12 (standard TC I/O). Alt function: USART1_TX; ADC1_VIN[3] additional analog input. |+| 10 | PA3 | bidirectional | General-purpose I/O PA3 (standard TC I/O). Alt functions: USART1_RX, USART2_SCK, SPI1_NSS; ADC1_VIN[2] additional analog input. |+| 11 | PA14(NRST) | bidirectional | General-purpose I/O PA14 (standard TC I/O). Alt functions: SWCLK (serial-wire debug clock), USART1_TX, SPI1_SCK. When RCC_SYSCFG SFT_NRST_RMP=1 the pin is remapped as external reset (NRST) and reset low must be held >=4 us. |+| 12 | PB0(OSCIN) | bidirectional | General-purpose I/O PB0 (standard TC I/O). Alt function: USART2_SCK; ADC1_VIN[1] additional analog input. Can be configured as the external HSE clock input (OSCIN) up to 48 MHz. |+| 13 | PA1 | bidirectional | General-purpose I/O PA1 (standard TC I/O). Alt functions: USART1_SCK, USART2_TX, I2C1_SDA, SPI1_MOSI. |+| 14 | VDD | power_in | Digital power supply input, 2.5 V to 5.5 V. Feeds the MCU core and digital I/O; decouple locally with a bypass capacitor. |+| 15 | PA13 | bidirectional | General-purpose I/O PA13 (standard TC I/O). Alt functions: SWDIO (serial-wire debug data), USART1_RX, USART2_RX, I2C1_SCL, SPI1_MISO. |+| 16 | PA10 | bidirectional | General-purpose I/O PA10 (standard TC I/O). Alt functions: SPI1_MISO, TIM1_CH3, TIM1_CH2, MCO (master clock output), USART1_TX. |+| 17 | PA0 | bidirectional | General-purpose I/O PA0 (standard TC I/O). Alt functions: SPI1_NSS, USART1_RX, TIM1_CH3N, I2C1_SCL, TIM3_CH3. |+| 18 | PA4 | bidirectional | General-purpose I/O PA4 (standard TC I/O). Alt functions: TIM1_BKIN, I2C1_SDA, TIM3_CH4. |+| 19 | PA5 | bidirectional | General-purpose I/O PA5 (standard TC I/O). Alt functions: SPI1_SCK, TIM1_CH1N, I2C1_SCL. |+| 20 | GND | power_in | Digital ground return (second GND pin), 0 V reference for the digital core and I/O. |+| 21 | VDDA | power_in | Analog power supply input for the capacitive AFE and ADC. Typically tied to VDD through a low-impedance filter; decouple with a local bypass capacitor. |+| 22 | GNDA | power_in | Analog ground return, 0 V reference for VDDA / AFE / ADC. Should be joined to digital GND at a single star point. |+| 23 | C0A | passive | Channel 0 capacitor input (analog). Positive terminal of the sensing capacitor for channel 0; connects to the external inductor L / sensing capacitor Cp network. |+| 24 | C0B | passive | Channel 0 capacitor ground (analog). Negative/return terminal of the channel-0 sensing capacitor; internally tied to GNDA through the chip in dual-electrode mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Mysentech |+| Package | QSOP-24 |+| Category | Sensor |+| Pins | 24 |++## Ordering variants++- `MCP62`+- `MCP62G`++## CAD (KiCad official)++- Symbol: `MCP62`+- Footprint: `Package_SO:QSOP-24_3.9x8.7mm_P0.635mm`+- 3D model: QSOP-24 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Mysentech datasheet](docs/mcp62-datasheet.pdf) (44 pp, sha256 `6645f2df8e6822c7`, retrieved 2026-08-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mcp62-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "mcp62",+  "version": "0.1.0",+  "type": "component",+  "description": "Mysentech Float Level Senors, QSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensor",+    "mcp62"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mcp62.kicad_sym",+    "mcp62.kicad_mod",+    "mcp62.glb",+    "mcp62.step",+    "mcp62.lbr",+    "docs/hero.png",+    "docs/mcp62-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file