Generated by kicad-footprint-generator · KiCad file format 20260206
MCP6044T-I
Microchip Tech · Operational Amplifier · TSSOP-14
MCP6044T-I from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Analog output of op amp A, a low-impedance voltage source. |
| 2 | VINA- | input | Inverting input of op amp A, a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Non-inverting input of op amp A, a high-impedance CMOS input with low bias current. |
| 4 | VDD | power_in | Positive power supply, 1.4V to 6.0V higher than VSS, and it needs bypass capacitors. |
| 5 | VINB+ | input | Non-inverting input of op amp B, a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Inverting input of op amp B, a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Analog output of op amp B, a low-impedance voltage source. |
| 8 | VOUTC | output | Analog output of op amp C, a low-impedance voltage source. |
| 9 | VINC- | input | Inverting input of op amp C, a high-impedance CMOS input with low bias current. |
| 10 | VINC+ | input | Non-inverting input of op amp C, a high-impedance CMOS input with low bias current. |
| 11 | VSS | power_in | Negative power supply, normally connected to ground in a single-supply configuration. |
| 12 | VIND+ | input | Non-inverting input of op amp D, a high-impedance CMOS input with low bias current. |
| 13 | VIND- | input | Inverting input of op amp D, a high-impedance CMOS input with low bias current. |
| 14 | VOUTD | output | Analog output of op amp D, a low-impedance voltage source. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -3 | 3 | mV | VCM = VSS | 2 | |
| Power Supply Rejection | PSRR | 70 | 85 | dB | VCM = VSS | 2 | |
| Input Bias Current, Industrial Temperature | IB | 20 | 100 | pA | TA = +85° | 2 | |
| Common-mode Rejection Ratio | CMRR | 62 | 80 | dB | VDD = 5V, VCM = -0.3V to 5.3V | 2 | |
| Common-mode Rejection Ratio | CMRR | 60 | 75 | dB | VDD = 5V, VCM = 2.5V to 5.3V | 2 | |
| Common-mode Rejection Ratio | CMRR | 60 | 80 | dB | VDD = 5V, VCM = -0.3V to 2.5V | 2 | |
| DC Open-Loop Gain (large signal) | AOL | 95 | 115 | dB | RL = 50 k to VL, VOUT = 0.1V to VDD-0.1V | 2 | |
| Supply Voltage | VDD | 1.4 | 6 | V | (Note 1) | 2 | |
| Quiescent Current per Amplifier | IQ | 0.3 | 0.6 | 1 | µA | IO = 0 | 2 |
| Specified Temperature Range, Industrial | TA | -40 | 85 | °C | Industrial Temperature parts | 4 | |
| Operating Temperature Range | TA | -40 | 125 | °C | (Note 1) | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Current at Input Pins | -2 | 2 | mA | 2 | |||
| Current at Output and Supply Pins | -30 | 30 | mA | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| ESD protection on all pins (HBM) | 4 | kV | HBM | 2 | |||
| ESD protection on all pins (MM) | 200 | V | MM | 2 | |||
| Thermal Resistance, 14L-TSSOP | θJA | 100 | °C/W | 4 | |||
| Input Offset Voltage Drift | 2 | µV/°C | VCM = VSS, TA= -40°C to +85°C (printed ±2) | 2 | |||
| Input Bias Current | IB | 1 | pA | 2 | |||
| Input Offset Current | IOS | 1 | pA | 2 | |||
| Output Short Circuit Current | ISC | 2 | mA | VDD = 1.4V | 2 | ||
| Output Short Circuit Current | ISC | 20 | mA | VDD = 5.5V | 2 | ||
| Gain Bandwidth Product | GBWP | 14 | kHz | 3 | |||
| Slew Rate | SR | 3 | V/ms | 3 | |||
| Phase Margin | PM | 65 | ° | G = +1 V/V | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 33 |
CAD (KiCad official)
- Symbol:
MCP6044T-I - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
mcp6044t-i-st-etched.step/mcp6044t-i-st-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6044t-i-st.step/mcp6044t-i-st.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (48 pp, sha256
1a998133f24b8113, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).