component

MCP6041T-I

Public Made by Adom

by adom

Microchip Operational Amplifier, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpmcp6041t-i
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6041t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
mcp6041t-i-etched.fit.json mcp6041t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6041t-i-etched.glb mcp6041t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6041t-i-etched.step mcp6041t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6041t-i.glb Publish 0.1.0 · Ray
mcp6041t-i.kicad_mod Publish 0.1.0 · Ray
mcp6041t-i.kicad_sym Publish 0.1.0 · Ray
mcp6041t-i.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
mcp6041t-i.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json mcp6041t-i: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mcp6041t-i: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MCP6041T-I

Microchip · Operational Amplifier · SOT-23-5

MCP6041T-I from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Analog output. Low-impedance voltage source; swings rail-to-rail (within ~10 mV of VSS/VDD into a 50 kΩ load).
2 VSS power_in Negative power supply pin. Typically tied to GND in single-supply operation. VDD must be 1.4V to 6.0V above VSS.
3 VIN+ input Non-inverting analog input. High-impedance CMOS input (~10^13 Ω
4 VIN- input Inverting analog input. High-impedance CMOS input (~10^13 Ω
5 VDD power_in Positive power supply pin. 1.4V to 6.0V above VSS. Should be locally bypassed with 0.01 µF to 0.1 µF within 2 mm of the pin.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • MCP6041T-IOT
  • MCP6041T-ISN
  • MCP6041T-IMS
  • MCP6041T-IP

CAD (KiCad official)

  • Symbol: MCP6041T-I
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp6041t-i-etched.step / mcp6041t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6041t-i.step / mcp6041t-i.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6041t-i.step 85 KB You want the bare part, or you mark your own boards.
mcp6041t-i-etched.step 1.6 MB You want the part with MCP6041T-I already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 408 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (40 pp, sha256 46191b86570828b5, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF