component

MCP6034T-E

Public Made by Adom

by adom

Microchip Tech Microcontroller Units (MCUs/MPUs/SOCs), TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentsingle chip microcomputer-microcontrollermcp6034t-efactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP6034T-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-14

MCP6034T-E from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of op amp A, a low-impedance voltage source.
2 VINA- input Inverting input of op amp A, a high-impedance CMOS input with low bias current.
3 VINA+ input Noninverting input of op amp A, a high-impedance CMOS input with low bias current.
4 VDD power_in Positive power supply, 1.8V to 5.5V higher than VSS, needs bypass capacitors.
5 VINB+ input Noninverting input of op amp B, a high-impedance CMOS input with low bias current.
6 VINB- input Inverting input of op amp B, a high-impedance CMOS input with low bias current.
7 VOUTB output Analog output of op amp B, a low-impedance voltage source.
8 VOUTC output Analog output of op amp C, a low-impedance voltage source.
9 VINC- input Inverting input of op amp C, a high-impedance CMOS input with low bias current.
10 VINC+ input Noninverting input of op amp C, a high-impedance CMOS input with low bias current.
11 VSS power_in Negative power supply, connected to ground in single-supply configuration.
12 VIND+ input Noninverting input of op amp D, a high-impedance CMOS input with low bias current.
13 VIND- input Inverting input of op amp D, a high-impedance CMOS input with low bias current.
14 VOUTD output Analog output of op amp D, a low-impedance voltage source.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TSSOP-14
Category Single Chip Microcomputer/Microcontroller
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -150 150 µV VDD = 3.0V, VCM = VDD/3 2
Power Supply Rejection Ratio PSRR 70 88 dB VCM = VSS 2
Input Bias Current IB 1 100 pA 2
Input Bias Current IB 2000 5000 pA TA = +125°C 2
Common-mode Input Voltage Range VCMR -0.3 0.3 V VSS, 0.3 to VDD + 0.3 (min relative to VSS, max relative to VDD) 2
Common-mode Rejection Ratio CMRR 70 95 dB VCM = -0.3V to 2.1V, VDD = 1.8V 2
Common-mode Rejection Ratio CMRR 72 93 dB VCM = -0.3V to 5.8V, VDD = 5.5V 2
Common-mode Rejection Ratio CMRR 70 89 dB VCM = 2.75V to 5.8V, VDD = 5.5V 2
DC Open-Loop Gain (Large Signal) AOL 95 115 dB 0.2V < VOUT < (VDD, 0.2V), RL = 50 kΩ to VL 2
Maximum Output Voltage Swing VOL, VOH 10 10 mV RL = 50 kΩ to VL, 0.5V input overdrive; VSS + 10 mV min / VDD, 10 mV max 3
Supply Voltage VDD 1.8 5.5 V 3
Quiescent Current per Amplifier IQ 0.4 0.9 1.35 µA IO = 0, VCM = VDD, VDD = 5.5V 3
Input Offset Drift with Temperature ΔVOS/ΔTA 3 µV/°C TA = -40°C to +125°C, VDD = 3.0V, VCM = VDD/3 2
Output Short-Circuit Current ISC 5 mA VDD = 1.8V 3
Output Short-Circuit Current ISC 23 mA VDD = 5.5V 3
Gain Bandwidth Product GBWP 10 kHz 3
Phase Margin PM 65 ° G = +1 V/V 3
Slew Rate SR 4 V/ms 3
Current at Input Pins -2 2 mA 2
Current at Output and Supply Pins -30 30 mA 2
Storage Temperature -65 150 °C 2
Maximum Junction Temperature TJ 150 °C 2
ESD Protection HBM 4 kV All pins, HBM 2
ESD Protection MM 400 V All pins, MM 2
Operating Temperature Range TA -40 125 °C 5
Thermal Resistance, 14-Lead TSSOP θJA 100 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 29

CAD (KiCad official)

  • Symbol: MCP6034T-E
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: mcp6034t-e-etched.step / mcp6034t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6034t-e.step / mcp6034t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (44 pp, sha256 90c498628e98ac93, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF