main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6031t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
mcp6031t-e-etched.fit.json mcp6031t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6031t-e-etched.glb mcp6031t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6031t-e-etched.step mcp6031t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6031t-e-hero.glb mcp6031t-e: hero from the plain model · Ray
mcp6031t-e-hero.overlay.json mcp6031t-e: hero from the plain model · Ray
mcp6031t-e.glb Publish 0.1.0 · Ray
mcp6031t-e.kicad_mod Publish 0.1.0 · Ray
mcp6031t-e.kicad_sym Publish 0.1.0 · Ray
mcp6031t-e.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
mcp6031t-e.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.1 · Ray
README.md mcp6031t-e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MCP6031T-E

Microchip · Operational Amplifier · SOT-23-5

MCP6031T-E from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Analog output of the op amp. Low-impedance voltage source, rail-to-rail output swing (typ. within ~10 mV of VSS/VDD with RL = 50 kOhm to VDD/2).
2 VSS power_in Negative power supply pin. Typically tied to ground in single-supply operation. VDD - VSS must be 1.8 V to 5.5 V (absolute max 7.0 V).
3 VIN+ input Non-inverting analog input. High-impedance CMOS input with low bias current (typ. +/-1 pA at 25 C). Common-mode range extends 0.3 V beyond both supply rails.
4 VIN- input Inverting analog input. High-impedance CMOS input with low bias current (typ. +/-1 pA at 25 C). Common-mode range extends 0.3 V beyond both supply rails.
5 VDD power_in Positive power supply pin. 1.8 V to 5.5 V above VSS. A local 0.01-0.1 uF bypass capacitor within 2 mm is recommended, plus a bulk 1 uF within 100 mm.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • MCP6031T-EE/OT
  • MCP6031T-E/OT
  • MCP6031T-EE/SN
  • MCP6031T-E/SN
  • MCP6031T-EE/MS
  • MCP6031T-E/MS
  • MCP6031T-EE/MNY
  • MCP6031T-E/MNY

CAD (KiCad official)

  • Symbol: MCP6031T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp6031t-e-etched.step / mcp6031t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6031t-e.step / mcp6031t-e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6031t-e.step 85 KB You want the bare part, or you mark your own boards.
mcp6031t-e-etched.step 1.8 MB You want the part with MCP6031T-E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 441 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (34 pp, sha256 02bc216237cb3668, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF