main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6024t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mcp6024t-i: viewers · Ray
mcp6024t-i-etched.fit.json mcp6024t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6024t-i-etched.glb mcp6024t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6024t-i-etched.step mcp6024t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6024t-i-sl-hero.glb Publish 0.2.1 · Ray
mcp6024t-i-sl-hero.overlay.json Publish 0.2.1 · Ray
mcp6024t-i.glb Publish 0.1.0 · Ray
mcp6024t-i.kicad_mod Publish 0.1.0 · Ray
mcp6024t-i.kicad_sym Publish 0.1.0 · Ray
mcp6024t-i.lbr mcp6024t-i-sl: renamed from mcp6024t-i, the part it was built from (MCP6024T-I/SL); family listed · Ray
mcp6024t-i.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md mcp6024t-i-sl: renamed from mcp6024t-i, the part it was built from (MCP6024T-I/SL); family listed · Ray

MCP6024T-I/SL

Microchip · Operational Amplifier · SOIC-14

MCP6024T-I from Microchip, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of op amp A. Low-impedance rail-to-rail output; short-circuit current is +/-30 mA typ at VDD=2.5V and +/-22 mA typ at VDD=5.5V. Swings within ~20 mV of either supply rail with RL=10 kOhm.
2 VINA- input Inverting input of op amp A. High-impedance CMOS input; input bias current 1 pA typ at +25 C. Must stay between VSS-1.0 V and VDD+1.0 V absolute, and inside common-mode range VSS-0.3 V to VDD+0.3 V for linear operation.
3 VINA+ input Non-inverting input of op amp A. High-impedance CMOS input; input bias current 1 pA typ at +25 C. Common-mode range extends from VSS-0.3 V to VDD+0.3 V (true rail-to-rail input).
4 VDD power_in Positive power supply, 2.5 V to 5.5 V (6.0 V absolute max relative to VSS). Requires a local 0.01-0.1 uF bypass capacitor within 2 mm plus a >=1 uF bulk capacitor within 100 mm. Supply current is ~1 mA per amplifier (4 mA total typical).
5 VINB+ input Non-inverting input of op amp B. High-impedance CMOS input matching VINA+ specs.
6 VINB- input Inverting input of op amp B. High-impedance CMOS input matching VINA- specs.
7 VOUTB output Analog output of op amp B. Rail-to-rail low-impedance output, same drive characteristics as VOUTA.
8 VOUTC output Analog output of op amp C. Rail-to-rail low-impedance output, same drive characteristics as VOUTA.
9 VINC- input Inverting input of op amp C. High-impedance CMOS input matching VINA- specs.
10 VINC+ input Non-inverting input of op amp C. High-impedance CMOS input matching VINA+ specs.
11 VSS power_in Negative power supply / ground reference. Typically tied to system ground for single-supply operation; VDD must be 2.5 V to 6.0 V (abs max) above VSS.
12 VIND+ input Non-inverting input of op amp D. High-impedance CMOS input matching VINA+ specs.
13 VIND- input Inverting input of op amp D. High-impedance CMOS input matching VINA- specs.
14 VOUTD output Analog output of op amp D. Rail-to-rail low-impedance output, same drive characteristics as VOUTA.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOIC-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • MCP6024T-I/ST
  • MCP6024T-II/ST
  • MCP6024T-I/SL
  • MCP6024T-II/SL
  • MCP6024T-II/P

CAD (KiCad official)

  • Symbol: MCP6024T-I
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: mcp6024t-i-etched.step / mcp6024t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6024t-i.step / mcp6024t-i.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6024t-i.step 195 KB You want the bare part, or you mark your own boards.
mcp6024t-i-etched.step 2.2 MB You want the part with MCP6024T-I already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 556 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (42 pp, sha256 968bbb977d7ab454, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP6024T-I/SL. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP6024T-I/ST