component
MCP6006T-E
Public Made by Adomby adom
Microchip Tech Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MCP6006T-E
Microchip Tech · Operational Amplifier · SOT-23-5
MCP6006T-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Analog output is a low-impedance voltage source. |
| 2 | VSS | power_in | Negative power supply; for typical single-supply use it is connected to ground, and VDD must be 1.8V to 5.5V higher than VSS. |
| 3 | VIN+ | power_in | Noninverting input is a high-impedance CMOS input with low bias currents. |
| 4 | VIN- | power_in | Inverting input is a high-impedance CMOS input with low bias currents. |
| 5 | VDD | power_in | Positive power supply, 1.8V to 5.5V higher than VSS, which needs bypass capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | 5.5 | V | 3 | ||
| Input Offset Voltage | VOS | -1.6 | 1.6 | mV | 2 | ||
| Power Supply Rejection Ratio | PSRR | 80 | 95 | dB | 2 | ||
| Common-Mode Rejection Ratio | CMRR | 60 | 76 | dB | VDD = 5.5V, VCM = -0.3V to 5.8V | 3 | |
| Common-Mode Rejection Ratio (MCP6006/6R/6U) | CMRR | 50 | 76 | dB | VDD = 5.5V, VCM = -0.3V to 5.8V (MCP6006/6R/6U) | 3 | |
| DC Open-Loop Gain (Large Signal) | AOL | 105 | 126 | dB | 0.2 < VOUT < (VDD, 0.2V) | 3 | |
| Output Short-Circuit Current | ISC | -6 | 6 | mA | VDD = 1.8V | 3 | |
| Output Short-Circuit Current | ISC | -30 | 30 | mA | VDD = 5.5V | 3 | |
| Quiescent Current per Amplifier | IQ | 50 | 70 | µA | IO = 0 | 3 | |
| Operating Temperature Range | TA | -40 | 125 | °C | 4 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Thermal Resistance, 5-Lead SOT-23 | θJA | 221 | °C/W | 4 | |||
| Supply Voltage (VDD, VSS) | VDD, VSS | 6 | V | 2 | |||
| Current at Analog Input Pins (VIN+, VIN-) | -5 | 5 | mA | 2 | |||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| ESD Protection on All Pins (HBM) | 3 | kV | HBM | 2 | |||
| ESD Protection on All Pins (CDM) | 2 | kV | CDM | 2 | |||
| ESD Protection on All Pins (MM) | 300 | V | MM | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 29 |
CAD (KiCad official)
- Symbol:
MCP6006T-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6006t-e-etched.step/mcp6006t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6006t-e.step/mcp6006t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (46 pp, sha256
9926033fb0cfa1f1, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP6006T-E
**Microchip Tech** · Operational Amplifier · SOT-23-5
MCP6006T-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Analog output is a low-impedance voltage source. |
| 2 | VSS | power_in | Negative power supply; for typical single-supply use it is connected to ground, and VDD must be 1.8V to 5.5V higher than VSS. |
| 3 | VIN+ | power_in | Noninverting input is a high-impedance CMOS input with low bias currents. |
| 4 | VIN- | power_in | Inverting input is a high-impedance CMOS input with low bias currents. |
| 5 | VDD | power_in | Positive power supply, 1.8V to 5.5V higher than VSS, which needs bypass capacitors. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | | 5.5 | V | | 3 |
| Input Offset Voltage | VOS | -1.6 | | 1.6 | mV | | 2 |
| Power Supply Rejection Ratio | PSRR | 80 | 95 | | dB | | 2 |
| Common-Mode Rejection Ratio | CMRR | 60 | 76 | | dB | VDD = 5.5V, VCM = -0.3V to 5.8V | 3 |
| Common-Mode Rejection Ratio (MCP6006/6R/6U) | CMRR | 50 | 76 | | dB | VDD = 5.5V, VCM = -0.3V to 5.8V (MCP6006/6R/6U) | 3 |
| DC Open-Loop Gain (Large Signal) | AOL | 105 | 126 | | dB | 0.2 < VOUT < (VDD, 0.2V) | 3 |
| Output Short-Circuit Current | ISC | -6 | | 6 | mA | VDD = 1.8V | 3 |
| Output Short-Circuit Current | ISC | -30 | | 30 | mA | VDD = 5.5V | 3 |
| Quiescent Current per Amplifier | IQ | | 50 | 70 | µA | IO = 0 | 3 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 4 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |
| Thermal Resistance, 5-Lead SOT-23 | θJA | | 221 | | °C/W | | 4 |
| Supply Voltage (VDD, VSS) | VDD, VSS | | | 6 | V | | 2 |
| Current at Analog Input Pins (VIN+, VIN-) | | -5 | | 5 | mA | | 2 |
| Storage Temperature | | -65 | | 150 | °C | | 2 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 2 |
| ESD Protection on All Pins (HBM) | | | | 3 | kV | HBM | 2 |
| ESD Protection on All Pins (CDM) | | | | 2 | kV | CDM | 2 |
| ESD Protection on All Pins (MM) | | | | 300 | V | MM | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 29 |
## CAD (KiCad official)
- Symbol: `MCP6006T-E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `mcp6006t-e-etched.step` / `mcp6006t-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp6006t-e.step` / `mcp6006t-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590375660981428224) (46 pp, sha256 `9926033fb0cfa1f1`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp6006t-e-datasheet.pdf)