component
MCP6006RT-E
Public Made by Adomby adom
Microchip Tech Operational Amplifier, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMCP6006RT-E
Microchip Tech · Operational Amplifier · SOT-23-5
MCP6006RT-E from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Analog output, a low-impedance voltage source. |
| 2 | VDD | power_in | Positive power supply, 1.8V to 5.5V higher than VSS and needing bypass capacitors. |
| 3 | VIN+ | power_in | Noninverting input, a high-impedance CMOS input with low bias current. |
| 4 | VIN- | power_in | Inverting input, a high-impedance CMOS input with low bias current. |
| 5 | VSS | power_in | Negative power supply, connected to ground in a single-supply configuration. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Operational Amplifier/Comparator |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -1.6 | 1.6 | mV | TA=+25°C | 2 | |
| Power Supply Rejection Ratio | PSRR | 80 | 95 | dB | 2 | ||
| Common-Mode Input Voltage Range (low) offset VSS | VCMR | -0.3 | 0.3 | V | Lower limit VSS, 0.3 V, upper limit VDD + 0.3 V (as VCM offset from rails) | 3 | |
| Common-Mode Input Voltage Range, full temperature offset | VCMR | -0.1 | 0.1 | V | TA=-40°C to +125°C; VSS, 0.1 V to VDD + 0.1 V (as VCM offset from rails) | 3 | |
| Common-Mode Rejection Ratio | CMRR | 60 | 76 | dB | VDD = 5.5V, VCM = -0.3V to 5.8V | 3 | |
| Common-Mode Rejection Ratio (MCP6006/6R/6U) | CMRR | 50 | 76 | dB | VDD = 5.5V, VCM = -0.3V to 5.8V (MCP6006/6R/6U) | 3 | |
| DC Open-Loop Gain | AOL | 105 | 126 | dB | 0.2 < VOUT < (VDD, 0.2V) | 3 | |
| High-Level Output Voltage | VOH | -10 | -6 | mV | VDD = 5.5V, RL = 10 k; printed VDD, 10 min, VDD, 6 typ | 3 | |
| High-Level Output Voltage | VOH | -80 | -54 | mV | VDD = 5.5V, RL = 1k; printed VDD, 80 min, VDD, 54 typ | 3 | |
| Low-Level Output Voltage | VOL | 6 | 10 | mV | VDD = 5.5V, RL = 10 k; printed VSS + value | 3 | |
| Low-Level Output Voltage | VOL | 54 | 80 | mV | VDD = 5.5V, RL = 1k; printed VSS + value | 3 | |
| Supply Voltage | VDD | 1.8 | 5.5 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 50 | 70 | µA | IO = 0 | 3 | |
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 4 | |
| Supply Voltage (VDD, VSS) | VDD, VSS | 6 | V | 2 | |||
| Current at Analog Input Pins | -5 | 5 | mA | VIN+, VIN-; printed ±5 mA | 2 | ||
| Storage Temperature | TA | -65 | 150 | °C | 2 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Thermal Resistance, 5-Lead SOT-23 | θJA | 221 | °C/W | 4 | |||
| Input Offset Drift with Temperature | ΔVOS/ΔTA | 0.6 | µV/°C | TA= -40°C to +125°C; printed ±0.6 | 2 | ||
| Gain Bandwidth Product | GBWP | 1 | MHz | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 29 |
CAD (KiCad official)
- Symbol:
MCP6006RT-E - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp6006rt-e-etched.step/mcp6006rt-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6006rt-e.step/mcp6006rt-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (46 pp, sha256
9926033fb0cfa1f1, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).