main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6004t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers mcp6004t-e: viewers · Ray
mcp6004t-e-etched.fit.json mcp6004t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6004t-e-etched.glb mcp6004t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6004t-e-etched.step mcp6004t-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mcp6004t-e.glb Publish 0.1.0 · Ray
mcp6004t-e.kicad_mod Publish 0.1.0 · Ray
mcp6004t-e.kicad_sym Publish 0.1.0 · Ray
mcp6004t-e.lbr Publish 0.1.0 · Ray
mcp6004t-e.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json mcp6004t-e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mcp6004t-e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MCP6004T-E

Microchip · Operational Amplifier · TSSOP-14

MCP6004T-E from Microchip, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog Output of Op Amp A. Low-impedance rail-to-rail output swing (VSS+25 mV to VDD-25 mV with 10 kΩ load at VDD=5.5V). Short-circuit current typically ±23 mA at VDD=5.5V.
2 VINA- input Inverting Input of Op Amp A. High-impedance CMOS input with typical input bias current of 1 pA at +25°C. Absolute input current limit ±2 mA.
3 VINA+ input Noninverting Input of Op Amp A. High-impedance CMOS input; rail-to-rail common-mode range of VSS-0.3V to VDD+0.3V.
4 VDD power_in Positive Power Supply. Operating range 1.8V to 6.0V referenced to VSS. Requires local 0.01-0.1 µF bypass within 2 mm plus a 1 µF bulk cap within 100 mm.
5 VINB+ input Noninverting Input of Op Amp B. High-impedance CMOS input; rail-to-rail common-mode range of VSS-0.3V to VDD+0.3V.
6 VINB- input Inverting Input of Op Amp B. High-impedance CMOS input with typical input bias current of 1 pA at +25°C. Absolute input current limit ±2 mA.
7 VOUTB output Analog Output of Op Amp B. Low-impedance rail-to-rail output swing (VSS+25 mV to VDD-25 mV with 10 kΩ load).
8 VOUTC output Analog Output of Op Amp C. Low-impedance rail-to-rail output swing (VSS+25 mV to VDD-25 mV with 10 kΩ load).
9 VINC- input Inverting Input of Op Amp C. High-impedance CMOS input with typical input bias current of 1 pA at +25°C.
10 VINC+ input Noninverting Input of Op Amp C. High-impedance CMOS input; rail-to-rail common-mode range of VSS-0.3V to VDD+0.3V.
11 VSS power_in Negative Power Supply. Typically tied to GND in single-supply operation. VDD-VSS absolute maximum 7.0V.
12 VIND+ input Noninverting Input of Op Amp D. High-impedance CMOS input; rail-to-rail common-mode range of VSS-0.3V to VDD+0.3V.
13 VIND- input Inverting Input of Op Amp D. High-impedance CMOS input with typical input bias current of 1 pA at +25°C.
14 VOUTD output Analog Output of Op Amp D. Low-impedance rail-to-rail output swing (VSS+25 mV to VDD-25 mV with 10 kΩ load).

Key specifications

Parameter Value
Manufacturer Microchip
Package TSSOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • MCP6004T-E/SL
  • MCP6004-E/SL
  • MCP6004-I/SL
  • MCP6004T-I/SL
  • MCP6004T-E/ST
  • MCP6004-E/ST
  • MCP6004-I/ST
  • MCP6004T-I/ST
  • MCP6004-E/P
  • MCP6004-I/P

CAD (KiCad official)

  • Symbol: MCP6004T-E
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: mcp6004t-e-etched.step / mcp6004t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6004t-e.step / mcp6004t-e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6004t-e.step 194 KB You want the bare part, or you mark your own boards.
mcp6004t-e-etched.step 2.2 MB You want the part with MCP6004T-E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 566 faces against 237 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (50 pp, sha256 a9b33cface59f4cd, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF