component

MCP6004-I

Public Made by Adom

by adom

Microchip Tech Operational Amplifier, SOIC-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorsmcp6004-ifactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP6004-I

Microchip Tech · Operational Amplifier · SOIC-14

MCP6004-I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of op amp A; the datasheet describes the output pins as low-impedance voltage sources.
2 VINA- input Inverting input of op amp A; a high-impedance CMOS input with low bias current.
3 VINA+ input Noninverting input of op amp A; a high-impedance CMOS input with low bias current, with a common-mode input range of VSS - 300 mV to VDD + 300 mV.
4 VDD power_in Positive power supply, 1.8V to 6.0V higher than VSS; requires bypass capacitors.
5 VINB+ input Noninverting input of op amp B; a high-impedance CMOS input with low bias current.
6 VINB- input Inverting input of op amp B; a high-impedance CMOS input with low bias current.
7 VOUTB output Analog output of op amp B; a low-impedance voltage source.
8 VOUTC output Analog output of op amp C; a low-impedance voltage source.
9 VINC- input Inverting input of op amp C; a high-impedance CMOS input with low bias current.
10 VINC+ input Noninverting input of op amp C; a high-impedance CMOS input with low bias current.
11 VSS power_in Negative power supply; connected to ground in the typical single-supply configuration.
12 VIND+ input Noninverting input of op amp D; a high-impedance CMOS input with low bias current.
13 VIND- input Inverting input of op amp D; a high-impedance CMOS input with low bias current.
14 VOUTD output Analog output of op amp D; a low-impedance voltage source.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 1.8 6 V Note 2 3
Quiescent Current per Amplifier IQ 50 100 170 µA IO = 0, VDD = 5.5V, VCM = 5V 3
Input Offset Voltage VOS -4.5 4.5 mV VCM = VSS (Note 1) 3
Common-Mode Rejection Ratio CMRR 60 76 dB VCM = -0.3V to 5.3V, VDD = 5V 3
DC Open-Loop Gain (Large Signal) AOL 88 112 dB VOUT = 0.3V to VDD, 0.3V, VCM =VSS 3
Industrial Temperature Range TA -40 85 °C 4
Operating Temperature Range TA -40 125 °C Note 1 4
Storage Temperature Range TA -65 150 °C 4
Supply Voltage (absolute maximum) VDD -VSS 7 V 3
Current at Analog Input Pins VIN+, VIN- -2 2 mA 3
Current at Output and Supply Pins -30 30 mA 3
Maximum Junction Temperature TJ 150 °C 3
ESD Protection on All Pins (HBM) 4 kV HBM 3
ESD Protection on All Pins (MM) 200 V MM 3
Thermal Resistance, 14-Lead SOIC JA 120 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 31

CAD (KiCad official)

  • Symbol: MCP6004-I
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: mcp6004-i-etched.step / mcp6004-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6004-i.step / mcp6004-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (50 pp, sha256 9632e25515289508, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF