component

MCP6002T-I

Public Made by Adom

by adom

Microchip Operational Amplifier, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpmcp6002t-i
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6002t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
mcp6002t-i-etched.fit.json mcp6002t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
mcp6002t-i-etched.glb mcp6002t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
mcp6002t-i-etched.step mcp6002t-i: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
mcp6002t-i.glb Publish 0.1.0 · Ray 1mo ago
mcp6002t-i.kicad_mod Publish 0.1.0 · Ray 1mo ago
mcp6002t-i.kicad_sym Publish 0.1.0 · Ray 1mo ago
mcp6002t-i.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 8 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
mcp6002t-i.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 7d ago
README.md mcp6002t-i: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 16d ago

MCP6002T-I

Microchip · Operational Amplifier · SOIC-8

MCP6002T-I from Microchip, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of Op Amp A. Low-impedance voltage source; rail-to-rail output swings from VSS+25 mV to VDD-25 mV (typ, RL=10 kΩ, VDD=5.5V). Short-circuit current ±23 mA typ at VDD=5.5V.
2 VINA- input Inverting input of Op Amp A. High-impedance CMOS input (~10^13 Ω) with low bias current (±1 pA typ at +25°C). Common-mode input range VSS-0.3V to VDD+0.3V.
3 VINA+ input Noninverting input of Op Amp A. High-impedance CMOS input with rail-to-rail common-mode range (VSS-0.3V to VDD+0.3V). Input bias current ±1 pA typ at +25°C.
4 VSS power_in Negative power supply / ground. Typically tied to ground in single-supply operation. Supply span VDD-VSS is 1.8V to 6.0V (7.0V absolute max).
5 VINB+ input Noninverting input of Op Amp B. High-impedance CMOS input with rail-to-rail common-mode range. Input bias current ±1 pA typ at +25°C.
6 VINB- input Inverting input of Op Amp B. High-impedance CMOS input (~10^13 Ω) with low bias current (±1 pA typ at +25°C).
7 VOUTB output Analog output of Op Amp B. Low-impedance voltage source; rail-to-rail output swings from VSS+25 mV to VDD-25 mV (typ, RL=10 kΩ, VDD=5.5V).
8 VDD power_in Positive power supply. 1.8V to 6.0V above VSS. Requires a local bypass capacitor (0.01-0.1 µF) within 2 mm and a bulk capacitor (≥1 µF) within 100 mm. Quiescent current 100 µA per amplifier (typ).

Key specifications

Parameter Value
Manufacturer Microchip
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MCP6002T-ISN
  • MCP6002T-ISNG
  • MCP6002T-IMS
  • MCP6002T-IP
  • MCP6002T-IMNY

CAD (KiCad official)

  • Symbol: MCP6002T-I
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mcp6002t-i-etched.step / mcp6002t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6002t-i.step / mcp6002t-i.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6002t-i.step 122 KB You want the bare part, or you mark your own boards.
mcp6002t-i-etched.step 2.0 MB You want the part with MCP6002T-I already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 501 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (50 pp, sha256 a9b33cface59f4cd, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF