component

MCP6002

Public Made by Adom

by adom

Microchip dual rail-to-rail CMOS op-amp, SOIC-8. 1 MHz, 1.8-6 V, low power. General-purpose single-supply. Datasheet-verified.

componentamplifierop-amprail-to-railcmoslow-powersoic-8microchip
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6002: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
viewers cross-highlight symbol + footprint viewers · Ray 2mo ago
mcp6002-etched.fit.json mcp6002: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
mcp6002-etched.glb mcp6002: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
mcp6002-etched.step mcp6002: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 1mo ago
MCP6002.adom-lbr.json MCP6002: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
mcp6002.glb Publish 0.1.0 · Ray 2mo ago
mcp6002.kicad_mod Publish 0.1.0 · Ray 2mo ago
mcp6002.kicad_sym Publish 0.1.0 · Ray 2mo ago
mcp6002.lbr add validated EAGLE .lbr (Fusion library) · Ray 2mo ago
MCP6002.lbr MCP6002: validated Fusion/EAGLE library + adom-lbr hub, generated from this page's KiCad sources · Ray 2mo ago
mcp6002.step add .step (Fusion 3D source) · Ray 2mo ago
package.json Publish 0.1.0 · Ray 2mo ago
page.json mcp6002: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray 28d ago
README.md mcp6002: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 1mo ago

MCP6002

Microchip Technology · Dual rail-to-rail CMOS op-amp · SOIC-8

A dual general-purpose CMOS operational amplifier in SOIC-8, rail-to-rail on both input and output. It runs from a single supply of 1.8 to 6 V and draws only about 100 uA per amplifier, so it suits battery and 3.3 V designs where the LM358 or TL072 will not swing to the rails or sip little enough power. With a 1 MHz gain-bandwidth and unity-gain stability it covers sensor buffering, active filters, and general signal conditioning. Two independent amplifiers share the VDD/VSS pins. Its singles and quad siblings are the MCP6001 and MCP6004.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of Op Amp A. Low-impedance voltage source; rail-to-rail output, swings within ~25 mV of VDD/VSS at RL = 10 kΩ. Short-circuit current typically ±23 mA at VDD = 5.5V.
2 VINA- input Inverting input of Op Amp A. High-impedance CMOS input (~10^13 Ω), input bias current typically ±1 pA at 25°C. Absolute-max current ±2 mA; keep within VSS − 1.0V to VDD + 1.0V.
3 VINA+ input Noninverting input of Op Amp A. High-impedance CMOS input (~10^13 Ω), input bias current typically ±1 pA at 25°C. Rail-to-rail common-mode range VSS − 0.3V to VDD + 0.3V.
4 VSS power_in Negative power supply (ground in single-supply operation). VDD − VSS must be between 1.8V and 6.0V; 7.0V absolute maximum. Tie to system ground when running from a single positive rail.
5 VINB+ input Noninverting input of Op Amp B. High-impedance CMOS input (~10^13 Ω), input bias current typically ±1 pA at 25°C. Rail-to-rail common-mode range VSS − 0.3V to VDD + 0.3V.
6 VINB- input Inverting input of Op Amp B. High-impedance CMOS input (~10^13 Ω), input bias current typically ±1 pA at 25°C. Absolute-max current ±2 mA; keep within VSS − 1.0V to VDD + 1.0V.
7 VOUTB output Analog output of Op Amp B. Low-impedance voltage source; rail-to-rail output, swings within ~25 mV of VDD/VSS at RL = 10 kΩ. Short-circuit current typically ±23 mA at VDD = 5.5V.
8 VDD power_in Positive power supply, 1.8V to 6.0V referenced to VSS. Requires a local 0.01-0.1 µF bypass capacitor within 2 mm plus a nearby ≥1 µF bulk cap. Quiescent current typically 100 µA per amplifier.

Key specifications

Parameter Value
Type Dual CMOS op-amp
Input/Output rail-to-rail
Gain-bandwidth 1 MHz
Supply voltage 1.8-6 V (single)
Quiescent current ~100 µA per amp
Slew rate 0.6 V/µs
Channels 2 independent
Package SOIC-8

Ordering variants

Same part, different packaging or reel option.

  • MCP6002T-I/SN (SOIC-8)
  • MCP6002-I/P (PDIP-8)

CAD (KiCad official)

  • Symbol: Amplifier_Operational:MCP6002-xSN
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D)
  • 3D model files: mcp6002-etched.step / mcp6002-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6002.step / mcp6002.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Technology datasheet (50 pp, sha256 4f879ab31115ecfa, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF