component

MCP6001UT-E

Public Made by Adom

by adom

Microchip Operational Amplifier, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpmcp6001ut-e
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mcp6001ut-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
mcp6001ut-e-etched.fit.json mcp6001ut-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
mcp6001ut-e-etched.glb mcp6001ut-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
mcp6001ut-e-etched.step mcp6001ut-e: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
mcp6001ut-e.glb Publish 0.1.0 · Ray 1mo ago
mcp6001ut-e.kicad_mod Publish 0.1.0 · Ray 1mo ago
mcp6001ut-e.kicad_sym Publish 0.1.0 · Ray 1mo ago
mcp6001ut-e.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect and oval pad as a SQUARE EAGLE smd; this carries the real pad shape across (0 -> 5 rounded pads) and stops dropping geometry drawn on KiCad User.N layers. Attributes, connects, pads and the pin-1 marker are gated against decreasing and are unchanged. · Ray 1mo ago
mcp6001ut-e.step Publish 0.1.0 · Ray 1mo ago
package.json Publish 0.2.0 · Ray 1mo ago
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray 1mo ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 7d ago
README.md mcp6001ut-e: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 17d ago

MCP6001UT-E

Microchip · Operational Amplifier · SOT-23-5

MCP6001UT-E from Microchip, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN+ input Non-inverting analog input of the op amp. High-impedance CMOS input with pA-level bias current; common-mode range extends from VSS - 0.3 V to VDD + 0.3 V (rail-to-rail input).
2 VSS power_in Negative power supply / ground pin. Typically tied to system ground in single-supply operation; VDD - VSS must be 1.8 V to 6.0 V (absolute max 7.0 V).
3 VIN- input Inverting analog input of the op amp. High-impedance CMOS input with pA-level bias current; typically connected to the feedback network.
4 VOUT output Analog output. Low-impedance, rail-to-rail voltage output swinging to within ~25 mV of each supply rail at RL = 10 kΩ; short-circuit current typically ±23 mA at VDD = 5.5 V.
5 VDD power_in Positive power supply. 1.8 V to 6.0 V above VSS; requires a local 0.01-0.1 µF bypass capacitor within 2 mm plus a nearby 1 µF bulk cap. Quiescent current ~100 µA typical.

Key specifications

Parameter Value
Manufacturer Microchip
Package SOT-23-5
Category Op-amp/Cmp
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • MCP6001UT-E/OT
  • MCP6001UT-I/OT
  • MCP6001T-E/LT
  • MCP6001T-I/LT
  • MCP6001T-E/OT
  • MCP6001T-I/OT
  • MCP6001RT-E/OT
  • MCP6001RT-I/OT

CAD (KiCad official)

  • Symbol: MCP6001UT-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: mcp6001ut-e-etched.step / mcp6001ut-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6001ut-e.step / mcp6001ut-e.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mcp6001ut-e.step 85 KB You want the bare part, or you mark your own boards.
mcp6001ut-e-etched.step 2.0 MB You want the part with MCP6001UT-E already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 481 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip datasheet (42 pp, sha256 e41ce7617fd9823a, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF