main
Ray
Publish 0.1.0
3b36123
MCP4802-E
Microchip Tech · Digital To Analog Converters (DACs) · SOIC-8
MCP4802-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply voltage input, which must be kept within 2.7V to 5.5V relative to VSS and should be bypassed with about 0.1 µF ceramic plus 10 µF tantalum capacitors. |
| 2 | CS | input | Active-low Chip Select input that must be low to enable the serial clock and data functions. |
| 3 | SCK | input | SPI-compatible serial clock input. |
| 4 | SDI | input | SPI-compatible serial data input. |
| 5 | LDAC | input | Latch DAC synchronization input that, when low, transfers both input registers to the VOUTA and VOUTB output registers at the same time and can be tied to VSS. |
| 6 | VOUTB | output | DAC B analog output with its own output amplifier, spanning VSS to G×VREF and not exceeding VDD. |
| 7 | VSS | power_in | Analog ground and current return path for the device, which must be connected to a low-impedance ground plane. |
| 8 | VOUTA | output | DAC A analog output with its own output amplifier, spanning VSS to G×VREF and not exceeding VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VDD | 2.7 | 5.5 | V | 5 | ||
| Schmitt Trigger High-Level Input Voltage (All digital input pins) | VIH | 0.7 | x VDD | All digital input pins | 6 | ||
| Schmitt Trigger Low-Level Input Voltage (All digital input pins) | VIL | 0.2 | x VDD | All digital input pins | 6 | ||
| Input Leakage Current | ILEAKAGE | -1 | 1 | µA | LDAC = CS = SDI = SCK = VDD or VSS | 6 | |
| Clock Frequency | FCLK | 20 | MHz | TA = +25°C (Note 1) | 6 | ||
| Clock High Time | tHI | 15 | ns | Note 1 | 6 | ||
| Clock Low Time | tLO | 15 | ns | Note 1 | 6 | ||
| CS Fall to First Rising CLK Edge | tCSSR | 40 | ns | Applies only when CS falls with CLK high. (Note 1) | 6 | ||
| Data Input Setup Time | tSU | 15 | ns | Note 1 | 6 | ||
| Data Input Hold Time | tHD | 10 | ns | Note 1 | 6 | ||
| SCK Rise to CS Rise Hold Time | tCHS | 15 | ns | Note 1 | 6 | ||
| CS High Time | tCSH | 15 | ns | Note 1 | 7 | ||
| LDAC Pulse Width | tLD | 100 | ns | Note 1 | 7 | ||
| LDAC Setup Time | tLS | 40 | ns | Note 1 | 7 | ||
| SCK Idle Time before CS Fall | tIDLE | 40 | ns | Note 1 | 7 | ||
| Specified Temperature Range | TA | -40 | 125 | °C | 7 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1 | 7 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 7 | ||
| VDD supply voltage absolute maximum | VDD | 6.5 | V | 3 | |||
| Current at Input Pins | -2 | 2 | mA | 3 | |||
| Current at Supply Pins | -50 | 50 | mA | 3 | |||
| Current at Output Pins | -25 | 25 | mA | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temp. with power applied | -55 | 125 | °C | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Thermal Resistance, 8L-SOIC | JA | 150 | °C/W | 7 | |||
| Input Current | IDD | 440 | µA | All digital inputs are grounded, all analog outputs (VOUT) are unloaded. Code = 0x000h. | 5 | ||
| Software Shutdown Current | ISHDN_SW | 5 | µA | 5 | |||
| Power-On Reset threshold | VPOR | 1.85 | V | 5 | |||
| Internal Reference Voltage | VREF | 2.048 | V | VOUTA when G = 1x and Code = 0xFFFh | 5 | ||
| VREF Temperature Coefficient | VREF/°C | 125 | ppm/°C | -40°C to 0°C | 5 | ||
| VREF Temperature Coefficient | VREF/°C | 45 | ppm/°C | 0°C to +85°C | 5 | ||
| Offset Error Temperature Coefficient | VOS/°C | -5 | ppm/°C | +25°C to +125°C | 5 | ||
| Gain Error | gE | -0.1 | % of FSR | Code = 0xFFFh, not including offset error | 5 | ||
| Gain Error Temperature Coefficient | G/°C | -3 | ppm/°C | 5 | |||
| Offset Error | VOS | 0.02 | % of FSR | Code = 0x000h | 5 | ||
| Slew Rate | SR | 0.55 | V/µs | CL= 400 pF, RL = | 6 | ||
| Phase Margin | PM | 66 | Degree (°) | CL= 400 pF, RL = | 6 | ||
| Short Circuit Current | ISC | 17 | mA | 6 | |||
| Settling Time | tSETTLING | 4.5 | µs | Within 1/2 LSb of final value from 1/4 to 3/4 full-scale range | 6 | ||
| Digital Pin Capacitance (All inputs/outputs) | CIN, COUT | 10 | pF | VDD = 5.0V, TA = +25°C, fCLK = 1 MHz (Note 1) | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | P = 8-Lead Plastic Dual In-Line (PDIP) SN = 8-Lead Plastic Small Outline - Narrow, 150 mil | 47 |
CAD (KiCad official)
- Symbol:
MCP4802-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mcp4802-e-etched.step/mcp4802-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4802-e.step/mcp4802-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (50 pp, sha256
1f0b231636222ea5, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP4802-E
**Microchip Tech** · Digital To Analog Converters (DACs) · SOIC-8
MCP4802-E from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply voltage input, which must be kept within 2.7V to 5.5V relative to VSS and should be bypassed with about 0.1 µF ceramic plus 10 µF tantalum capacitors. |
| 2 | CS | input | Active-low Chip Select input that must be low to enable the serial clock and data functions. |
| 3 | SCK | input | SPI-compatible serial clock input. |
| 4 | SDI | input | SPI-compatible serial data input. |
| 5 | LDAC | input | Latch DAC synchronization input that, when low, transfers both input registers to the VOUTA and VOUTB output registers at the same time and can be tied to VSS. |
| 6 | VOUTB | output | DAC B analog output with its own output amplifier, spanning VSS to G×VREF and not exceeding VDD. |
| 7 | VSS | power_in | Analog ground and current return path for the device, which must be connected to a low-impedance ground plane. |
| 8 | VOUTA | output | DAC A analog output with its own output amplifier, spanning VSS to G×VREF and not exceeding VDD. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VDD | 2.7 | | 5.5 | V | | 5 |
| Schmitt Trigger High-Level Input Voltage (All digital input pins) | VIH | 0.7 | | | x VDD | All digital input pins | 6 |
| Schmitt Trigger Low-Level Input Voltage (All digital input pins) | VIL | | | 0.2 | x VDD | All digital input pins | 6 |
| Input Leakage Current | ILEAKAGE | -1 | | 1 | µA | LDAC = CS = SDI = SCK = VDD or VSS | 6 |
| Clock Frequency | FCLK | | | 20 | MHz | TA = +25°C (Note 1) | 6 |
| Clock High Time | tHI | 15 | | | ns | Note 1 | 6 |
| Clock Low Time | tLO | 15 | | | ns | Note 1 | 6 |
| CS Fall to First Rising CLK Edge | tCSSR | 40 | | | ns | Applies only when CS falls with CLK high. (Note 1) | 6 |
| Data Input Setup Time | tSU | 15 | | | ns | Note 1 | 6 |
| Data Input Hold Time | tHD | 10 | | | ns | Note 1 | 6 |
| SCK Rise to CS Rise Hold Time | tCHS | 15 | | | ns | Note 1 | 6 |
| CS High Time | tCSH | 15 | | | ns | Note 1 | 7 |
| LDAC Pulse Width | tLD | 100 | | | ns | Note 1 | 7 |
| LDAC Setup Time | tLS | 40 | | | ns | Note 1 | 7 |
| SCK Idle Time before CS Fall | tIDLE | 40 | | | ns | Note 1 | 7 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 7 |
| Operating Temperature Range | TA | -40 | | 125 | °C | Note 1 | 7 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 7 |
| VDD supply voltage absolute maximum | VDD | | | 6.5 | V | | 3 |
| Current at Input Pins | | -2 | | 2 | mA | | 3 |
| Current at Supply Pins | | -50 | | 50 | mA | | 3 |
| Current at Output Pins | | -25 | | 25 | mA | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Ambient temp. with power applied | | -55 | | 125 | °C | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Thermal Resistance, 8L-SOIC | JA | | 150 | | °C/W | | 7 |
| Input Current | IDD | | 440 | | µA | All digital inputs are grounded, all analog outputs (VOUT) are unloaded. Code = 0x000h. | 5 |
| Software Shutdown Current | ISHDN_SW | | 5 | | µA | | 5 |
| Power-On Reset threshold | VPOR | | 1.85 | | V | | 5 |
| Internal Reference Voltage | VREF | | 2.048 | | V | VOUTA when G = 1x and Code = 0xFFFh | 5 |
| VREF Temperature Coefficient | VREF/°C | | 125 | | ppm/°C | -40°C to 0°C | 5 |
| VREF Temperature Coefficient | VREF/°C | | 45 | | ppm/°C | 0°C to +85°C | 5 |
| Offset Error Temperature Coefficient | VOS/°C | | -5 | | ppm/°C | +25°C to +125°C | 5 |
| Gain Error | gE | | -0.1 | | % of FSR | Code = 0xFFFh, not including offset error | 5 |
| Gain Error Temperature Coefficient | G/°C | | -3 | | ppm/°C | | 5 |
| Offset Error | VOS | | 0.02 | | % of FSR | Code = 0x000h | 5 |
| Slew Rate | SR | | 0.55 | | V/µs | CL= 400 pF, RL = | 6 |
| Phase Margin | PM | | 66 | | Degree (°) | CL= 400 pF, RL = | 6 |
| Short Circuit Current | ISC | | 17 | | mA | | 6 |
| Settling Time | tSETTLING | | 4.5 | | µs | Within 1/2 LSb of final value from 1/4 to 3/4 full-scale range | 6 |
| Digital Pin Capacitance (All inputs/outputs) | CIN, COUT | | 10 | | pF | VDD = 5.0V, TA = +25°C, fCLK = 1 MHz (Note 1) | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | P = 8-Lead Plastic Dual In-Line (PDIP) SN = 8-Lead Plastic Small Outline - Narrow, 150 mil | 47 |
## CAD (KiCad official)
- Symbol: `MCP4802-E`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `mcp4802-e-etched.step` / `mcp4802-e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp4802-e.step` / `mcp4802-e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp4802-e-datasheet.pdf) (50 pp, sha256 `1f0b231636222ea5`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp4802-e-datasheet.pdf)