main
History Download
Ray Publish 0.1.0 967660e

MCP4728A1-E

Microchip Tech · Pre-ordered MCUs · MSOP-10

MCP4728A1-E from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply voltage pin, also used as external DAC reference; must be kept within 2.7V to 5.5V for specified operation, with about 0.1 µF ceramic bypass to ground recommended.
2 SCL input I2C serial clock input, open-drain input that needs a pull-up resistor to VDD (5 kΩ to 10 kΩ for Standard/Fast mode, less than 1 kΩ for High Speed mode).
3 SDA bidirectional I2C serial data input and open-drain output that needs a pull-up resistor to VDD (5 kΩ to 10 kΩ for Standard/Fast mode, less than 1 kΩ for High Speed mode).
4 LDAC input Schmitt trigger input that transfers input register contents to the output registers (VOUT) on a High-to-Low transition and selects the device for reading and writing I2C address bits.
5 RDY/BSY output Open-drain EEPROM programming status indicator, High when idle and Low during programming, needing an external pull-up of about 100 kΩ to VDD.
6 VOUT A output Buffered rail-to-rail analog voltage output of channel A, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended.
7 VOUT B output Buffered rail-to-rail analog voltage output of channel B, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended.
8 VOUT C output Buffered rail-to-rail analog voltage output of channel C, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended.
9 VOUT D output Buffered rail-to-rail analog voltage output of channel D, able to drive up to 1000 pF load, with RL greater than 5 kΩ recommended.
10 VSS power_in Ground reference and current return path, to be connected to a ground plane (preferably analog ground) through a low-impedance connection.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Embedded Processors & Controllers
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage VDD 2.7 5.5 V 3
Supply Current with External Reference IDD_EXT 800 1400 µA VREF = VDD, VDD = 5.5V, all 4 channels in Normal mode 3
Supply Current with Internal Reference IDD_INT 800 1400 µA VREF = Internal Reference, VDD = 5.5V, all 4 channels in normal mode 3
Power-Down Current with Internal Reference IPD_INT 45 60 µA All 4 channels are powered down, VREF = Internal Reference 3
Power-Down Current with External Reference IPD_EXT 40 nA All 4 channels are powered down. (VREF = VDD) 3
Resolution n 12 Bits Code Change: 000h to FFFh 4
Integral Nonlinearity Error INL 2 13 LSB Note 5 4
DNL Error DNL -0.75 0.2 0.75 LSB Note 5 4
Offset Error VOS 5 20 mV Code = 000h 4
Gain Error GE -1.25 0.4 1.25 % of FSR Code = FFFh, Offset error is not included. Typical value is at room temperature 4
Internal Voltage Reference VREF 2.007 2.048 2.089 V 4
Power-on Reset Threshold Voltage VPOR 2.2 V All circuits, including EEPROM, are ready to operate. 4
Power-Up Ramp Rate VRAMP 1 V/s Note 2, Note 4 4
Offset Error Drift ΔVOS/°C 0.16 ppm/°C -45°C to +25°C 4
Offset Error Drift ΔVOS/°C 0.44 ppm/°C +25°C to +125°C 4
Gain Error Drift ΔGE/°C -3 ppm/°C 4
Internal VREF Temperature Coefficient ΔVREF/°C 125 ppm/°C -40 to 0°C 4
Internal VREF Temperature Coefficient ΔVREF/°C 45 ppm/°C 0 to +125°C 4
Reference Output Noise ENREF 290 µVp-p Code = FFFh, 0.1, 10 Hz, Gx =1 4
1/f Corner Frequency fCORNER 400 Hz 4
Output Voltage Settling Time TSETTLING 6 µs Note 8 5
Analog Output Time Delay from Power-Down Mode TdExPD 4.5 µs VDD = 5V, Note 4, Note 9 5
Power Supply Rejection PSRR -57 dB VDD = 5V ±10%, VREF = Internal 5
Capacitive Load Stability CL 1000 pF RL =5kΩ, No oscillation, Note 4 5
Slew Rate SR 0.55 V/µs 5
Phase Margin pM 66 Degree (°) CL = 400 pF, RL = ∞ 5
Short Circuit Current ISC 15 24 mA VDD = 5V, All VOUT Pins = Grounded. Tested at room temperature. 5
Output Low Voltage VOL 0.4 V IOL = 3 mA, SDA and RDY/BSY pins 6
Schmitt Trigger Low Input Threshold Voltage VIL 0.3 V VDD > 2.7V. SDA, SCL, LDAC pins (max printed as 0.3VDD) 6
Schmitt Trigger Low Input Threshold Voltage VIL 0.2 V VDD ≤ 2.7V. SDA, SCL, LDAC pins (max printed as 0.2VDD) 6
Schmitt Trigger High Input Threshold Voltage VIH 0.7 V SDA, SCL, LDAC pins (min printed as 0.7VDD) 6
Input Leakage ILI -1 1 µA SCL = SDA = LDAC =VDD, SCL = SDA = LDAC =VSS 6
Pin Capacitance CPIN 3 pF Note 4 6
EEPROM Write Time TWRITE 25 50 ms EEPROM write time 6
Data Retention 200 Years At +25°C, Note 3 6
LDAC Low Time TLDAC 210 ns Updates analog outputs (Note 3) 6
SCL Rise Time TRSCL 1000 ns Standard Mode 9
SCL Rise Time TRSCL 300 ns Fast Mode (min 20 + 0.1Cb) 9
SDA Rise Time TRSDA 1000 ns Standard Mode 9
SCL Fall Time TFSCL 300 ns Standard Mode 9
SDA Fall Time TFSDA 300 ns Standard Mode 9
Data Input Setup Time TSU:DAT 250 ns Standard Mode 9
Data Input Setup Time TSU:DAT 100 ns Fast Mode 9
Data Hold Time THD:DAT 0 3450 ns Standard Mode 9
Data Hold Time THD:DAT 0 900 ns Fast Mode 9
Output Valid from Clock TAA 0 3750 ns Standard Mode 9
Output Valid from Clock TAA 0 1200 ns Fast Mode 9
Bus Free Time TBUF 4700 ns Standard Mode 10
Bus Free Time TBUF 1300 ns Fast Mode 10
Current at Input Pins -2 2 mA 3
Current at Supply Pins -110 110 mA 3
Current at Output Pins -25 25 mA 3
Storage Temperature -65 150 °C 3
Ambient Temp. with Power Applied -55 125 °C 3
Maximum Junction Temperature TJ 150 °C 3
Operating Temperature Range TA -40 125 °C 10
Thermal Resistance, 10L-MSOP θJA 202 °C/W 10

CAD (KiCad official)

  • Symbol: MCP4728A1-E
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: mcp4728a1-e-etched.step / mcp4728a1-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4728a1-e.step / mcp4728a1-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (68 pp, sha256 7e6515c45a02ffe4, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF