Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP4716A3T-E

Microchip Tech · Pre-ordered MCUs · SOT-23-6

MCP4716A3T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Buffered DAC analog output that swings from approximately 0 V to approximately VDD, with full-scale range VSS to G×VREF, and in Power-Down mode connects to an internal 1 kΩ, 125 kΩ or 640 kΩ pull-down.
2 VSS power_in Device ground reference for all circuitry, which must be connected to a ground plane through a low-impedance connection.
3 VDD power_in Positive supply input referenced to VSS, rated 2.7 V to 5.5 V, and should be bypassed with about 0.1 µF ceramic plus 10 µF tantalum capacitors.
4 SDA bidirectional I2C serial data pin, an open-drain N-channel driver that requires a pull-up resistor to VDD and is used to write or read the DAC registers and configuration bits.
5 SCL input I2C serial clock pin that accepts only external clocks from the master, is an open-drain N-channel driver, and requires a pull-up resistor to VDD.
6 VREF power_in External voltage reference input that can be selected as the resistor ladder reference (buffered or unbuffered), is disconnected internally when VDD is chosen as reference, and must not exceed VDD/2 when the output gain is 2.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Embedded Processors & Controllers
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage (VDD) VDD 2.7 5.5 V 4
Operating Temperature Range TA -40 125 °C Note 1 13
Specified Temperature Range TA -40 125 °C 13
Voltage on VDD with respect to VSS -0.6 6.5 V 3
Voltage on all pins with respect to VSS -0.3 V 3
Input clamp current IIK -20 20 mA VI < 0, VI > VDD 3
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 3
Maximum input current source/sunk by SDA, SCL pins 2 mA 3
Maximum output current sunk by SDA output pin 25 mA 3
Maximum current out of VSS pin 50 mA 3
Maximum current into VDD pin 50 mA 3
Maximum current sourced by the VOUT pin 40 mA 3
Maximum current sunk by the VOUT pin 40 mA 3
Maximum current sunk by the VREF pin 40 µA 3
Ambient temperature with power applied -55 125 °C 3
Storage temperature -65 150 °C 3
ESD protection on all pins 6 kV HBM 3
ESD protection on all pins 400 V MM 3
Maximum Junction Temperature TJ 150 °C 3
Input Current IDD 210 400 µA VREF1:VREF0 = 00, SCL = SDA = VSS, VOUT is unloaded, volatile DAC Register = 0x000 4
Power-Down Current IDDP 0.09 2 µA PD1:PD0 = 01 (Note 6), VOUT not connected 4
Power-Up Ramp Rate VRAMP 1 V/S Note 1, Note 4 4
Offset Error VOS 0.02 0.75 % of FSR Code = 0x000h, VREF1:VREF0 = 00, G = 0 4
Zero-Scale Error EZS 0.52 7.7 LSb MCP4716, Code = 0x000h 4
Full-Scale Error EFS 1.1 20.5 LSb MCP4716, Code = 0x3FFh 4
Gain Error gE -2 -0.1 2 % of FSR MCP4716, Code = 0x3FFh, VREF1:VREF0 = 00, G = 0 4
INL Error INL -3.625 0.5 3.625 LSb MCP4716, codes: 25 to 1000 4
DNL Error DNL -0.188 0.05 0.188 LSb MCP4716, codes: 25 to 1000 4
Short Circuit Current ISC 7 15 24 mA 5
External Reference (VREF) Input Range, buffered mode VREF 0.04 V Buffered mode 5
External Reference (VREF) Input Range, unbuffered mode VREF 0 V Unbuffered mode 5
Output Low Voltage VOL 0.4 V IOL = 3 mA 6
Input Leakage ILI -1 1 µA SCL = SDA = VSS or SCL = SDA = VDD 6
Pin Capacitance CPIN 3 pF Note 5 6
EEPROM Write Time TWRITE 25 50 ms 6
Endurance 1 Million Cycles At +25°C, Note 1 6
SCL pin frequency, Standard mode FSCL 0 100 kHz Cb = 400 pF, 2.7V - 5.5V 8
SCL pin frequency, Fast mode FSCL 0 400 kHz Cb = 400 pF, 2.7V - 5.5V 8
SCL pin frequency, High-Speed 1.7 FSCL 0 1.7 MHz Cb = 400 pF, 4.5V - 5.5V 8
SCL pin frequency, High-Speed 3.4 FSCL 0 3.4 MHz Cb = 100 pF, 4.5V - 5.5V 8
Bus capacitive loading, 100 kHz mode Cb 400 pF 8
Bus capacitive loading, 400 kHz mode Cb 400 pF 8
Bus capacitive loading, 1.7 MHz mode Cb 400 pF 8
Bus capacitive loading, 3.4 MHz mode Cb 100 pF 8
Thermal Resistance, 6L-SOT-23 θJA 190 °C/W 13

CAD (KiCad official)

  • Symbol: MCP4716A3T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mcp4716a3t-e-etched.step / mcp4716a3t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4716a3t-e.step / mcp4716a3t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (86 pp, sha256 f89f3345410b5013, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF