main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp4662-103e: viewers · Ray
mcp4662-103e-etched.glb Publish 0.1.0 · Ray
mcp4662-103e-etched.step mcp4662-103e: factory component page (tier=mfr) · Ray
mcp4662-103e-hero.glb mcp4662-103e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp4662-103e-hero.overlay.json Publish 0.1.0 · Ray
mcp4662-103e.glb Publish 0.1.0 · Ray
mcp4662-103e.kicad_mod Publish 0.1.0 · Ray
mcp4662-103e.kicad_sym Publish 0.1.0 · Ray
mcp4662-103e.lbr Publish 0.1.0 · Ray
mcp4662-103e.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 10 pins · Ray

MCP4662-103E

Microchip Tech · Digital Potentiometers · MSOP-10

MCP4662-103E from Microchip Tech, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HVC/A0 input Address 0 input for the I2C interface, latched at POR/BOR, and the High Voltage Command pin, where HVC/A0 = VIHH selects a high-voltage command; it is a high-voltage tolerant Schmitt-trigger input with a 'smart' pull-up.
2 SCL input I2C serial clock input that accepts only external clock signals from the host controller, with a high-voltage tolerant Schmitt-trigger input.
3 SDA bidirectional I2C serial data I/O implemented as an open-drain N-channel driver, with a high-voltage tolerant Schmitt-trigger input.
4 VSS power_in Device ground reference; the voltage on the terminals must be referenced to this pin.
5 P1B passive Potentiometer 1 terminal B, a fixed connection to the zero-scale wiper value (0x00 for both 7-bit and 8-bit devices), with a voltage that must be between VSS and VDD.
6 P1W passive Potentiometer 1 wiper terminal, which can support both positive and negative current and whose voltage must be between VSS and VDD.
7 P0W passive Potentiometer 0 wiper terminal, which can support both positive and negative current and whose voltage must be between VSS and VDD.
8 P0B passive Potentiometer 0 terminal B, a fixed connection to the zero-scale wiper value (0x00 for both 7-bit and 8-bit devices), with a voltage that must be between VSS and VDD.
9 A1 input Address 1 input for the I2C interface, used with A0 to set the device address so that up to eight MCP45XX/46XX devices can share one bus; it is a high-voltage tolerant Schmitt-trigger input with a 'smart' pull-up.
10 VDD power_in Positive power supply input referenced to VSS; while VDD is below Vmin (2.7V), the electrical performance may not meet the data sheet specifications.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-10
Category Data Converters
Pins 10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage on VDD with respect to VSS VDD -0.6 7 V 3
Voltage on HVC/A0, A1, A2, SCL, SDA and WP with respect to VSS -0.6 12.5 V 3
Voltage on all other pins (PxA, PxW, PxB) with respect to VSS; max printed as VDD + 0.3V -0.3 V 3
Input clamp current IIK -20 20 mA VI < 0, VI > VDD, VI > VPP ON HV pins 3
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 3
Maximum output current sunk by any Output pin 25 mA 3
Maximum output current sourced by any Output pin 25 mA 3
Maximum current out of VSS pin 100 mA 3
Maximum current into VDD pin 100 mA 3
Maximum current into PXA, PXW and PXB pins -2.5 2.5 mA 3
Storage temperature -65 150 °C 3
Ambient temperature with power applied -40 125 °C 3
Soldering temperature of leads 300 °C 10 seconds 3
ESD protection, all pins (HBM) 4 kV HBM 3
ESD protection, all pins (MM) 300 V MM 3
Maximum junction temperature TJ 150 °C 3
Supply voltage VDD 2.7 5.5 V 4
HVC pin voltage range (high-voltage maximum) VHV 12.5 V VDD ≥ 4.5V 4
VDD start voltage to ensure wiper reset VBOR 1.65 V RAM retention voltage (VRAM) < VBOR 4
Delay after device exits the reset state TBORD 10 20 µs VDD > VBOR 4
Supply current, serial interface active, 3.4 MHz IDD 600 µA Serial interface active, HVC/A0 = VIH (or VIL), write all 0's to volatile wiper 0, VDD = 5.5V, FSCL = 3.4 MHz 4
Supply current, serial interface active, 100 kHz 250 µA Serial interface active, HVC/A0 = VIH (or VIL), write all 0's to volatile wiper 0, VDD = 5.5V, FSCL = 100 kHz 4
EE write current (nonvolatile device only) 575 µA EE write cycle, VDD = 5.5V, FSCL = 400 kHz, write all 0's to nonvolatile wiper 0, SCL = VIL or VIH 4
Supply current, serial interface inactive 2.5 5 µA Serial interface inactive (stop condition, SCL = SDA = VIH), wiper = 0, VDD = 5.5V, HVC/A0 = VIH 4
Resistance RAB, -103 device (10 kΩ) RAB 8 10 12 kΩ ±20%, -103 devices (Note 1) 5
Resistance RAB tolerance, -103 device RAB -20 20 % Resistance (±20%), -103 devices 5
Nominal resistance match, wiper terminals /RBW0 - RBW1/ / RBW 0.25 1.5 % MCP46X2 devices only, Code = Full-Scale 5
Wiper resistance at 5.5V RW 75 160 Ω VDD = 5.5 V, IW = 2.0 mA, code = 00h 5
Wiper resistance at 2.7V RW 75 300 Ω VDD = 2.7 V, IW = 2.0 mA, code = 00h 5
Rheostat integral non-linearity, 10 k 8-bit, 5.5V R-INL -1.5 0.5 1.5 LSb 10 k 8-bit, 5.5V, IW = 450 µA 9
Rheostat integral non-linearity, 10 k 8-bit, 3.0V R-INL -5.5 2.5 5.5 LSb 10 k 8-bit, 3.0V, IW = 240 µA (Note 7) 9
Rheostat differential non-linearity, 10 k 8-bit, 5.5V R-DNL -0.5 0.25 0.5 LSb 10 k 8-bit, 5.5V, IW = 450 µA 10
Rheostat differential non-linearity, 10 k 8-bit, 3.0V R-DNL -1 0.25 1 LSb 10 k 8-bit, 3.0V, IW = 240 µA (Note 7) 10
High-voltage input entry voltage (WiperLock) VIHHEN 8.5 12.5 V Threshold for WiperLock Technology 11
High-voltage limit VMAX 12.5 V Pin can tolerate VMAX or less. 11
Output low voltage (SDA) VOL 0.4 V VDD ≥ 2.0V, IOL = 3 mA 12
Weak pull-up / pull-down current IPU 1.75 mA Internal VDD pull-up, VIHH pull-down; VDD = 5.5V, VIHH = 12.5V 12
Input leakage current IIL -1 1 µA VIN = VDD and VIN = VSS 12
EEPROM programming write cycle time tWC 5 10 ms 12
Power supply sensitivity, 8-bit PSS 0.0015 0.0035 %/% 8-bit, VDD = 2.7V to 5.5V, VA = 2.7V, Code = 80h 12
I2C clock frequency, standard mode FSCL 0 100 kHz Cb = 400 pF, 1.8V - 5.5V 13
I2C clock frequency, fast mode FSCL 0 400 kHz Cb = 400 pF, 2.7V - 5.5V 13
I2C clock frequency, high-speed 3.4 MHz mode FSCL 0 3.4 MHz Cb = 100 pF, 4.5V - 5.5V 13
Data setup time, 100 kHz mode TSU:DAT 250 ns 100 kHz mode, Note 2 16
Data setup time, 400 kHz mode TSU:DAT 100 ns 400 kHz mode 16
Output valid from clock, 100 kHz mode TAA 3450 ns 100 kHz mode, Note 1 16
Output valid from clock, 400 kHz mode TAA 900 ns 400 kHz mode, Note 1 16
Output valid from clock, 3.4 MHz mode TAA 150 ns Cb = 100 pF, Note 1 16
Bus free time, 100 kHz mode TBUF 4700 ns 100 kHz mode 16
Bus free time, 400 kHz mode TBUF 1300 ns 400 kHz mode 16
Operating temperature range TA -40 125 °C 17
Thermal resistance, 10L-MSOP JA 202 °C/W 17
Nominal resistance tempco RAB (absolute, rheostat) RAB/T 50 ppm/°C TA = -20°C to +70°C 5
Nominal resistance tempco RAB (absolute, rheostat) RAB/T 100 ppm/°C TA = -40°C to +85°C 5
Nominal resistance tempco RAB (absolute, rheostat) RAB/T 150 ppm/°C TA = -40°C to +125°C 5
Ratiometric tempco (potentiometer) VWB/T 15 ppm/°C Code = Mid-scale (80h or 40h) 5
Bandwidth -3 dB, 10 k 8-bit BW 1 MHz 10 k 8-bit, Code = 80h, load = 30 pF 8

CAD (KiCad official)

  • Symbol: MCP4662-103E
  • Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
  • 3D model: MSOP-10 (KiCad packages3D, STEP)
  • 3D model files: mcp4662-103e-etched.step / mcp4662-103e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4662-103e.step / mcp4662-103e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (102 pp, sha256 7f12067625b9fa89, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF