← Commit history

mcp4652t-502e: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·fd3c35774a · ·parent 380d5b3
2 files changed +93−13
package.json+51−11
@@ -53,19 +53,19 @@         "number": "1",         "name": "HVC/A0",         "type": "input",-        "description": "High-voltage command / address bit 0 input with internal 'smart' VDD pull-up; state is latched at POR/BOR; tolerates up to 12.5 V (VIHH) to enable high-voltage serial commands; VIH \u2265 0.45 VDD for VDD 2.7-5.5 V."+        "description": "High-voltage command / address bit 0 input with internal 'smart' VDD pull-up; state is latched at POR/BOR; tolerates up to 12.5 V (VIHH) to enable high-voltage serial commands; VIH ≥ 0.45 VDD for VDD 2.7-5.5 V."       },       {         "number": "2",         "name": "SCL",         "type": "input",-        "description": "I2C serial clock input, slave-only (no clock stretching); supports standard (100 kHz), fast (400 kHz), and high-speed (3.4 MHz) modes; VIH \u2265 0.7 VDD."+        "description": "I2C serial clock input, slave-only (no clock stretching); supports standard (100 kHz), fast (400 kHz), and high-speed (3.4 MHz) modes; VIH ≥ 0.7 VDD."       },       {         "number": "3",         "name": "SDA",         "type": "bidirectional",-        "description": "I2C serial data open-drain N-channel I/O; SDA must be stable while SCL is HIGH; VOL \u2264 0.4 V at IOL = 3 mA (VDD \u2265 2.0 V)."+        "description": "I2C serial data open-drain N-channel I/O; SDA must be stable while SCL is HIGH; VOL ≤ 0.4 V at IOL = 3 mA (VDD ≥ 2.0 V)."       },       {         "number": "4",@@ -77,37 +77,37 @@         "number": "5",         "name": "P1B",         "type": "passive",-        "description": "Resistor network 1 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current \u00b12.5 mA; disconnectable via TCON register bit R1B."+        "description": "Resistor network 1 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R1B."       },       {         "number": "6",         "name": "P1W",         "type": "passive",-        "description": "Resistor network 1 wiper (adjustable terminal); wiper resistance typically 75 \u03a9 (max 160 \u03a9) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."+        "description": "Resistor network 1 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."       },       {         "number": "7",         "name": "P0W",         "type": "passive",-        "description": "Resistor network 0 wiper (adjustable terminal); wiper resistance typically 75 \u03a9 (max 160 \u03a9) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."+        "description": "Resistor network 0 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."       },       {         "number": "8",         "name": "P0B",         "type": "passive",-        "description": "Resistor network 0 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current \u00b12.5 mA; disconnectable via TCON register bit R0B."+        "description": "Resistor network 0 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R0B."       },       {         "number": "9",         "name": "A1",         "type": "input",-        "description": "I2C address bit 1 input with internal 'smart' pull-up; must be tied statically to VDD or VSS; VIH \u2265 0.45 VDD; supports up to 4 MCP46X2 devices on one I2C bus together with A0."+        "description": "I2C address bit 1 input with internal 'smart' pull-up; must be tied statically to VDD or VSS; VIH ≥ 0.45 VDD; supports up to 4 MCP46X2 devices on one I2C bus together with A0."       },       {         "number": "10",         "name": "VDD",         "type": "power_in",-        "description": "Positive power supply input; 2.7 V to 5.5 V for full electrical specifications, 1.8 V to 5.5 V for serial interface operation only; decouple with 0.1 \u00b5F to VSS placed within 4 mm of pin."+        "description": "Positive power supply input; 2.7 V to 5.5 V for full electrical specifications, 1.8 V to 5.5 V for serial interface operation only; decouple with 0.1 µF to VSS placed within 4 mm of pin."       },       {         "number": "11",@@ -148,6 +148,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "mcp4652t-502e.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          2.98,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mcp4652t-502e-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          2.98,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2c667091d2fe1c4cdb1f3e829d21d226c904ff35398ca250fd5e750e98d7cec1",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -133,7 +133,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "mcp4652t-502e.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          2.98,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "mcp4652t-502e-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          3.0,+          2.98,+          0.77+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2c667091d2fe1c4cdb1f3e829d21d226c904ff35398ca250fd5e750e98d7cec1",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -181,4 +221,4 @@     "public": true   },   "updated_at": "2026-09-28T19:08:54.381Z"-}\ No newline at end of file+}