← Commit history

Set visibility: public

Ray ·d5f5b16830 · ·parent 537ddd9
1 file changed +13−10
page.json+13−10
@@ -38,19 +38,19 @@         "number": "1",         "name": "HVC/A0",         "type": "input",-        "description": "High-voltage command / address bit 0 input with internal 'smart' VDD pull-up; state is latched at POR/BOR; tolerates up to 12.5 V (VIHH) to enable high-voltage serial commands; VIH \u2265 0.45 VDD for VDD 2.7-5.5 V."+        "description": "High-voltage command / address bit 0 input with internal 'smart' VDD pull-up; state is latched at POR/BOR; tolerates up to 12.5 V (VIHH) to enable high-voltage serial commands; VIH ≥ 0.45 VDD for VDD 2.7-5.5 V."       },       {         "number": "2",         "name": "SCL",         "type": "input",-        "description": "I2C serial clock input, slave-only (no clock stretching); supports standard (100 kHz), fast (400 kHz), and high-speed (3.4 MHz) modes; VIH \u2265 0.7 VDD."+        "description": "I2C serial clock input, slave-only (no clock stretching); supports standard (100 kHz), fast (400 kHz), and high-speed (3.4 MHz) modes; VIH ≥ 0.7 VDD."       },       {         "number": "3",         "name": "SDA",         "type": "bidirectional",-        "description": "I2C serial data open-drain N-channel I/O; SDA must be stable while SCL is HIGH; VOL \u2264 0.4 V at IOL = 3 mA (VDD \u2265 2.0 V)."+        "description": "I2C serial data open-drain N-channel I/O; SDA must be stable while SCL is HIGH; VOL ≤ 0.4 V at IOL = 3 mA (VDD ≥ 2.0 V)."       },       {         "number": "4",@@ -62,37 +62,37 @@         "number": "5",         "name": "P1B",         "type": "passive",-        "description": "Resistor network 1 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current \u00b12.5 mA; disconnectable via TCON register bit R1B."+        "description": "Resistor network 1 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R1B."       },       {         "number": "6",         "name": "P1W",         "type": "passive",-        "description": "Resistor network 1 wiper (adjustable terminal); wiper resistance typically 75 \u03a9 (max 160 \u03a9) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."+        "description": "Resistor network 1 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."       },       {         "number": "7",         "name": "P0W",         "type": "passive",-        "description": "Resistor network 0 wiper (adjustable terminal); wiper resistance typically 75 \u03a9 (max 160 \u03a9) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."+        "description": "Resistor network 0 wiper (adjustable terminal); wiper resistance typically 75 Ω (max 160 Ω) at VDD = 5.5 V, IW = 2.0 mA, code = 00h; voltage range VSS to VDD."       },       {         "number": "8",         "name": "P0B",         "type": "passive",-        "description": "Resistor network 0 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current \u00b12.5 mA; disconnectable via TCON register bit R0B."+        "description": "Resistor network 0 Terminal B (zero-scale end); voltage range VSS to VDD; maximum terminal current ±2.5 mA; disconnectable via TCON register bit R0B."       },       {         "number": "9",         "name": "A1",         "type": "input",-        "description": "I2C address bit 1 input with internal 'smart' pull-up; must be tied statically to VDD or VSS; VIH \u2265 0.45 VDD; supports up to 4 MCP46X2 devices on one I2C bus together with A0."+        "description": "I2C address bit 1 input with internal 'smart' pull-up; must be tied statically to VDD or VSS; VIH ≥ 0.45 VDD; supports up to 4 MCP46X2 devices on one I2C bus together with A0."       },       {         "number": "10",         "name": "VDD",         "type": "power_in",-        "description": "Positive power supply input; 2.7 V to 5.5 V for full electrical specifications, 1.8 V to 5.5 V for serial interface operation only; decouple with 0.1 \u00b5F to VSS placed within 4 mm of pin."+        "description": "Positive power supply input; 2.7 V to 5.5 V for full electrical specifications, 1.8 V to 5.5 V for serial interface operation only; decouple with 0.1 µF to VSS placed within 4 mm of pin."       },       {         "number": "11",@@ -176,5 +176,8 @@     "docs/mcp4652t-502e-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file