component
MCP4651T-503E
Public Made by Adomby adom
Microchip Tech Digital Potentiometers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 11d ago |
| viewers | 11d ago |
| mcp4651t-503e-etched.glb | 11d ago |
| mcp4651t-503e-etched.step | 11d ago |
| mcp4651t-503e-hero.glb | 11d ago |
| mcp4651t-503e-hero.overlay.json | 11d ago |
| mcp4651t-503e.glb | 11d ago |
| mcp4651t-503e.kicad_mod | 11d ago |
| mcp4651t-503e.kicad_sym | 11d ago |
| mcp4651t-503e.lbr | 11d ago |
| mcp4651t-503e.step | 11d ago |
| package.json | 11d ago |
| page.json | 11d ago |
| README.md | 11d ago |
MCP4651T-503E
Microchip Tech · Digital Potentiometers · TSSOP-14
MCP4651T-503E from Microchip Tech, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVC/A0 | input | Address 0 input for the I2C interface that doubles as the High Voltage command pin; the HV-tolerant digital inputs support up to 12.5V. |
| 2 | SCL | input | I2C serial clock input; as a slave device it accepts only external clock signals from the host. |
| 3 | SDA | bidirectional | I2C serial data I/O implemented as an open-drain N-channel driver. |
| 4 | VSS | power_in | Device ground reference for the VDD supply and all terminal voltages. |
| 5 | P1B | passive | Potentiometer 1 terminal B; the voltage on this terminal must be between VSS and VDD and it can carry positive or negative current. |
| 6 | P1W | passive | Potentiometer 1 wiper terminal; the voltage on this terminal must be between VSS and VDD and it can carry positive or negative current. |
| 7 | P1A | passive | Potentiometer 1 terminal A; the voltage on this terminal must be between VSS and VDD and it can carry positive or negative current. |
| 8 | P0A | passive | Potentiometer 0 terminal A; the voltage on this terminal must be between VSS and VDD and it can carry positive or negative current. |
| 9 | P0W | passive | Potentiometer 0 wiper terminal; the voltage on this terminal must be between VSS and VDD and it can carry positive or negative current. |
| 10 | P0B | passive | Potentiometer 0 terminal B; the voltage on this terminal must be between VSS and VDD and it can carry positive or negative current. |
| 11 | NC | unconnected | No connect pin; it should be connected to VDD or VSS. |
| 12 | A2 | input | Address 2 input for the I2C interface; together with A1 and A0, up to eight devices can share one I2C bus. |
| 13 | A1 | input | Address 1 input for the I2C interface; together with A2 and A0, up to eight devices can share one I2C bus. |
| 14 | VDD | power_in | Positive power supply input relative to VSS; electrical performance may not meet data sheet specifications while VDD is below 2.7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-14 |
| Category | ADC/DAC/Data Conversion |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD with respect to VSS | VDD | -0.6 | 7 | V | 3 | ||
| Voltage on HVC/A0, A1, A2, SCL, and SDA with respect to VSS | -0.6 | 12.5 | V | 3 | |||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0, VI > VDD, VI > VPP ON HV pins | 3 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 3 | |
| Maximum output current sunk by any Output pin | 25 | mA | 3 | ||||
| Maximum output current sourced by any Output pin | 25 | mA | 3 | ||||
| Maximum current out of VSS pin | 100 | mA | 3 | ||||
| Maximum current into VDD pin | 100 | mA | 3 | ||||
| Maximum current into PXA, PXW and PXB pins | -2.5 | 2.5 | mA | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| Package power dissipation, TSSOP-14 | 1 | W | TA = +50°C, TJ = +150°C | 3 | |||
| Maximum junction temperature | TJ | 150 | °C | 3 | |||
| Soldering temperature of leads | 300 | °C | 10 seconds | 3 | |||
| ESD protection on all pins (HBM) | -4 | 4 | kV | HBM | 3 | ||
| ESD protection on all pins (MM) | -300 | 300 | V | MM | 3 | ||
| Supply voltage VDD | VDD | 2.7 | 5.5 | V | 4 | ||
| Supply voltage VDD (serial interface only) | VDD | 1.8 | 2.7 | V | Serial interface only. | 4 | |
| HVC pin voltage range | VHV | 12.5 | V | VDD ≥ 4.5V | 4 | ||
| VDD start voltage to ensure wiper reset | VBOR | 1.65 | V | RAM retention voltage (VRAM) < VBOR | 4 | ||
| Delay after device exits the reset state | TBORD | 10 | 20 | µs | VDD > VBOR | 4 | |
| Supply current, serial interface active, 3.4 MHz | IDD | 600 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL) (Note 11); Write all 0's to Volatile Wiper 0; VDD = 5.5V, FSCL = 3.4 MHz | 4 | ||
| Supply current, serial interface active, 100 kHz | IDD | 250 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL) (Note 11); Write all 0's to Volatile Wiper 0; VDD = 5.5V, FSCL = 100 kHz | 4 | ||
| Supply current, serial interface inactive | IDD | 2.5 | 5 | µA | Serial Interface Inactive, (Stop condition, SCL = SDA = VIH), Wiper = 0; VDD = 5.5V, HVC/A0 = VIH | 4 | |
| Resistance RAB (-503 devices) | RAB | 40 | 50 | 60 | k | -503 devices (Note 1) | 5 |
| Resistance tolerance | RAB | -20 | 20 | % | (± 20%) -503 devices | 5 | |
| Nominal resistance match /RAB0-RAB1//RAB | /RAB0-RAB1//RAB | 0.2 | 1.25 | % | MCP46X1 devices only | 5 | |
| Wiper resistance, VDD = 5.5 V | RW | 75 | 160 | VDD = 5.5 V, IW = 2.0 mA, code = 00h | 5 | ||
| Wiper resistance, VDD = 2.7 V | RW | 75 | 300 | VDD = 2.7 V, IW = 2.0 mA, code = 00h | 5 | ||
| Maximum current through terminal A, W = Full-Scale | IT | 2.5 | mA | Terminal A IAW, W = Full-Scale (FS) | 6 | ||
| Maximum current through terminal B, W = Zero Scale | IT | 2.5 | mA | Terminal B IBW, W = Zero Scale (ZS) | 6 | ||
| Maximum current through terminal W | IT | 2.5 | mA | Terminal W IAW or IBW, W = FS or ZS | 6 | ||
| Maximum current through terminal A and B, RAB(MIN) = 40000 | IAB | 0.138 | mA | IAB, VB = 0V, VA = 5.5V, RAB(MIN) = 40000 | 6 | ||
| Full-scale error (MCP4XX1), 50 k 8-bit | VWFSE | -0.8 | -0.1 | LSb | 50 k 8-bit 3.0V ≤ VDD ≤ 5.5V | 7 | |
| Zero-scale error (MCP4XX1), 50 k 8-bit | VWZSE | 0.1 | 0.8 | LSb | 50 k 8-bit 3.0V ≤ VDD ≤ 5.5V | 7 | |
| Potentiometer integral non-linearity (MCP4XX1), 8-bit | INL | -1 | 0.5 | 1 | LSb | 8-bit 3.0V ≤ VDD ≤ 5.5V; MCP4XX1 devices only (Note 2) | 7 |
| Potentiometer differential non-linearity (MCP4XX1), 8-bit | DNL | -0.5 | 0.25 | 0.5 | LSb | 8-bit 3.0V ≤ VDD ≤ 5.5V; MCP4XX1 devices only (Note 2) | 7 |
| Rheostat integral non-linearity, 50 k 8-bit 5.5V | R-INL | -1.5 | 0.5 | 1.5 | LSb | 50 k 8-bit 5.5V, IW = 90 µA | 9 |
| Rheostat integral non-linearity, 50 k 8-bit 3.0V | R-INL | -2 | 1 | 2 | LSb | 50 k 8-bit 3.0V, IW = 48 µA (Note 7) | 9 |
| Rheostat differential non-linearity, 50 k 8-bit 5.5V | R-DNL | -0.5 | 0.25 | 0.5 | LSb | 50 k 8-bit 5.5V, IW = 90 µA | 10 |
| Rheostat differential non-linearity, 50 k 8-bit 3.0V | R-DNL | -0.5 | 0.25 | 0.5 | LSb | 50 k 8-bit 3.0V, IW = 48 µA (Note 7) | 10 |
| High voltage limit | VMAX | 12.5 | V | Pin can tolerate VMAX or less. | 11 | ||
| Output low voltage (SDA) | VOL | 0.4 | V | VDD ≥ 2.0V, IOL = 3 mA | 12 | ||
| Weak pull-up / pull-down current | IPU | 1.75 | mA | Internal VDD pull-up, VIHH pull-down; VDD = 5.5V, VIHH = 12.5V | 12 | ||
| Input leakage current | IIL | -1 | 1 | µA | VIN = VDD and VIN = VSS | 12 | |
| Specified temperature range | TA | -40 | 125 | °C | 16 | ||
| Operating temperature range | TA | -40 | 125 | °C | 16 | ||
| SCL clock frequency, standard mode | FSCL | 0 | 100 | kHz | Cb = 400 pF, 1.8V - 5.5V | 13 | |
| SCL clock frequency, fast mode | FSCL | 0 | 400 | kHz | Cb = 400 pF, 2.7V - 5.5V | 13 | |
| SCL clock frequency, high-speed 1.7 | FSCL | 0 | 1.7 | MHz | Cb = 400 pF, 4.5V - 5.5V | 13 | |
| SCL clock frequency, high-speed 3.4 | FSCL | 0 | 3.4 | MHz | Cb = 100 pF, 4.5V - 5.5V | 13 | |
| Nominal resistance tempco, TA = -20°C to +70°C | RAB/T | 50 | ppm/°C | TA = -20°C to +70°C | 5 | ||
| Nominal resistance tempco, TA = -40°C to +85°C | RAB/T | 100 | ppm/°C | TA = -40°C to +85°C | 5 | ||
| Nominal resistance tempco, TA = -40°C to +125°C | RAB/T | 150 | ppm/°C | TA = -40°C to +125°C | 5 | ||
| Ratiometric tempco | VWB/T | 15 | ppm/°C | Code = Midscale (80h or 40h) | 5 |
CAD (KiCad official)
- Symbol:
MCP4651T-503E - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
mcp4651t-503e-etched.step/mcp4651t-503e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4651t-503e.step/mcp4651t-503e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (102 pp, sha256
ee77464c39584a73, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).