main
Ray
Publish 0.1.0
61fd7df
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228
{
"slug": "mcp45hv51-503e",
"version": "0.1.0",
"type": "component",
"description": "Microchip Tech Pre-ordered MCUs, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"embedded processors & controllers",
"mcp45hv51-503e",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mcp45hv51-503e.kicad_sym",
"mcp45hv51-503e.kicad_mod",
"mcp45hv51-503e.glb",
"mcp45hv51-503e.step",
"mcp45hv51-503e.lbr",
"docs/hero.png",
"docs/mcp45hv51-503e-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mcp45hv51-503e-hero.glb",
"mcp45hv51-503e-hero.overlay.json",
"mcp45hv51-503e-etched.glb"
],
"component": {
"mpn": "MCP45HV51-503E",
"manufacturer": "Microchip Tech",
"package": "TSSOP-14",
"pin_count": 14,
"category": "Embedded Processors & Controllers",
"subcategory": "Pre-ordered MCUs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/556468123355b07f5b301e0b9dfefe39.pdf",
"parts": {
"symbol": "mcp45hv51-503e.kicad_sym",
"footprint": "mcp45hv51-503e.kicad_mod",
"model_3d": "mcp45hv51-503e-hero.glb",
"model_3d_plain": "mcp45hv51-503e-etched.glb",
"model_3d_step": "mcp45hv51-503e-etched.step",
"model_3d_step_plain": "mcp45hv51-503e.step",
"lbr": "mcp45hv51-503e.lbr"
},
"distributor_links": {
"lcsc": "C637120"
},
"distributor_check": {
"checked_at": "2026-10-28T16:04:58Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "VL",
"type": "power_in",
"description": "Positive digital power supply input, ranging from 1.8V to 5.5V relative to DGND, with a decoupling capacitor on VL to DGND recommended."
},
{
"number": "2",
"name": "SCL",
"type": "input",
"description": "I2C serial clock input; the device is an I2C slave so SCL is input-only with a Schmitt trigger."
},
{
"number": "3",
"name": "A1",
"type": "input",
"description": "I2C address bit 1 input that, together with A0, completes the device address and allows up to four devices on one bus."
},
{
"number": "4",
"name": "SDA",
"type": "bidirectional",
"description": "I2C serial data pin, an open-drain N-channel driver with Schmitt-trigger input that lets the host read and write the Wiper and TCON registers."
},
{
"number": "5",
"name": "A0",
"type": "input",
"description": "I2C address bit 0 input whose value is latched at POR/BOR, completing the device address together with A1."
},
{
"number": "6",
"name": "WLAT",
"type": "input",
"description": "Wiper latch enable; when Low the received I2C value is transferred to the Wiper register, and when High it is held in the I2C shift register buffer (SPBUF)."
},
{
"number": "7",
"name": "NC",
"type": "unconnected",
"description": "Pin not internally connected to the die; to reduce noise coupling, connect it to either DGND or VL."
},
{
"number": "8",
"name": "SHDN",
"type": "input",
"description": "Shutdown input that forces the resistor network terminals into the hardware shutdown state."
},
{
"number": "9",
"name": "DGND",
"type": "power_in",
"description": "Digital ground reference for the device logic and the VL supply."
},
{
"number": "10",
"name": "V-",
"type": "power_in",
"description": "Analog negative potential supply; its potential must be lower than or equal to the DGND pin potential."
},
{
"number": "11",
"name": "P0B",
"type": "passive",
"description": "Potentiometer 0 Terminal B; voltage must be between V- and V+, and it can carry both positive and negative current."
},
{
"number": "12",
"name": "P0W",
"type": "passive",
"description": "Potentiometer 0 wiper terminal; voltage must be between V- and V+, and it can carry both positive and negative current."
},
{
"number": "13",
"name": "P0A",
"type": "passive",
"description": "Potentiometer 0 Terminal A; voltage must be between V- and V+, and it can carry both positive and negative current."
},
{
"number": "14",
"name": "V+",
"type": "power_in",
"description": "Analog positive supply, which must be at a higher potential than V-; analog operation is specified from 10V to 36V relative to V-."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN MCP45HV51-503E has no package suffix. The datasheet's ordering table lists MCP45HV51-503E/ST; The VL pin number is inferred as 1. The table row for VL is printed as '11 VL' (TSSOP and QFN column; The Exposed Pad (EP) exists only on the QFN-20 package and is not part of the TSSOP-14 pinout, so it"
],
"pages_sent": 21,
"cost_usd": 0.0276,
"at": "2026-10-28T16:04:43"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/556468123355b07f5b301e0b9dfefe39.pdf",
"pages": 100,
"sha256": "ab854db7c83242c1",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 14,
"described": 14,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mcp45hv51-503e.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mcp45hv51-503e-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "648c489236352d59ab1c2b6df830ea076b336de9cdd6b48f5b35166ffa0fffd7",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}