component
MCP4532-502E
Public Made by Adomby adom
Microchip Tech Digital Potentiometers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP4532-502E
Microchip Tech · Digital Potentiometers · MSOP-8
MCP4532-502E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVC/A0 | input | High-voltage command input and I2C Address 0 pin, latched at POR/BOR, which selects a normal or High Voltage command when at VIHH and allows up to eight devices on one bus. |
| 2 | SCL | input | I2C serial clock input from the host controller; the device is a slave and accepts only external clock signals. |
| 3 | SDA | bidirectional | I2C serial data I/O connected to the host controller, with an open-drain N-channel output driver. |
| 4 | VSS | power_in | Device ground reference. |
| 5 | P0W | passive | Potentiometer 0 wiper terminal (adjustable terminal) that supports positive and negative current, with its voltage kept between VSS and VDD. |
| 6 | P0B | passive | Potentiometer 0 terminal B, the fixed zero-scale connection (wiper value 0x00) that supports positive and negative current, with its voltage kept between VSS and VDD. |
| 7 | A1 | input | I2C Address 1 input that, with the A2 and A0 pins, allows up to eight devices on one I2C bus. |
| 8 | VDD | power_in | Positive power supply input relative to VSS; electrical specifications are only guaranteed from 2.7V, and the device operates from 1.8V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | MSOP-8 |
| Category | ADC/DAC/Data Conversion |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Nominal resistance RAB (-502) | RAB | 4 | 5 | 6 | kΩ | -502 devices (Note 1); ±20% | 5 |
| Resistance tolerance | RAB | -20 | 20 | % | 5 | ||
| Supply Voltage | VDD | 2.7 | 5.5 | V | 4 | ||
| Supply Voltage (serial interface only) | VDD | 1.8 | 2.7 | V | Serial Interface only. | 4 | |
| VDD Start Voltage to ensure Wiper Reset | VBOR | 1.65 | V | RAM retention voltage (VRAM) < VBOR | 4 | ||
| Delay after device exits reset state | TBORD | 10 | 20 | µs | VDD > VBOR | 4 | |
| Supply Current, 3.4 MHz | IDD | 600 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL), Write all 0's to Volatile Wiper 0, VDD = 5.5V, FSCL = 3.4 MHz | 4 | ||
| Supply Current, 100 kHz | IDD | 250 | µA | Serial Interface Active, HVC/A0 = VIH (or VIL), Write all 0's to Volatile Wiper 0, VDD = 5.5V, FSCL = 100 kHz | 4 | ||
| Supply Current, interface inactive | IDD | 2.5 | 5 | µA | Serial Interface Inactive, (Stop condition, SCL = SDA = VIH), Wiper = 0, VDD = 5.5V, HVC/A0 = VIH | 4 | |
| Wiper Resistance | RW | 75 | 160 | Ω | VDD = 5.5 V, IW = 2.0 mA, code = 00h | 5 | |
| Wiper Resistance | RW | 75 | 300 | Ω | VDD = 2.7 V, IW = 2.0 mA, code = 00h | 5 | |
| Nominal Resistance Tempco | ΔRAB/ΔT | 50 | ppm/°C | TA = -20°C to +70°C | 5 | ||
| Nominal Resistance Tempco | ΔRAB/ΔT | 100 | ppm/°C | TA = -40°C to +85°C | 5 | ||
| Nominal Resistance Tempco | ΔRAB/ΔT | 150 | ppm/°C | TA = -40°C to +125°C | 5 | ||
| Resistor Terminal Input Voltage Range | VA,VW,VB | 0 | 5.5 | V | Vss to VDD; Note 5, Note 6 | 5 | |
| Max current through terminal A, W or B | IT | 2.5 | mA | Terminal W IAW or IBW, W = FS or ZS | 6 | ||
| Max current terminals A and B | IAB | 1.38 | mA | VB = 0V, VA = 5.5V, RAB(MIN) = 4000Ω | 6 | ||
| Rheostat INL 5k 7-bit | R-INL | -1.125 | 0.5 | 1.125 | LSb | 5 k 7-bit 5.5V, IW = 900 µA | 9 |
| Rheostat INL 5k 7-bit | R-INL | -6 | 4.5 | 6 | LSb | 5 k 7-bit 3.0V, IW = 480 µA (Note 7) | 9 |
| Rheostat DNL 5k 7-bit | R-DNL | -0.375 | 0.25 | 0.375 | LSb | 5 k 7-bit 5.5V, IW = 900 µA | 10 |
| Rheostat DNL 5k 7-bit | R-DNL | -0.75 | 0.5 | 0.75 | LSb | 5 k 7-bit 3.0V, IW = 480 µA (Note 7) | 10 |
| Bandwidth -3 dB | BW | 2 | MHz | 5 k 7-bit Code = 40h, load = 30 pF | 8 | ||
| Capacitance (PA) | CAW | 75 | pF | f =1 MHz, Code = Full-Scale | 10 | ||
| Capacitance (PW) | CW | 120 | pF | f =1 MHz, Code = Full-Scale | 10 | ||
| Capacitance (PB) | CBW | 75 | pF | f =1 MHz, Code = Full-Scale | 10 | ||
| Leakage current into A, W or B | IWL | 100 | nA | MCP4XX2 PxB = PxW = VSS | 6 | ||
| Schmitt Trigger High Input Threshold (except SDA/SCL) | VIH | 0.45 | V | 2.7V ≤ VDD ≤ 5.5V; min is 0.45 VDD | 11 | ||
| Schmitt Trigger High Input Threshold SDA/SCL | VIH | 0.7 | 12.5 | V | min is 0.7 VDD; max VMAX | 11 | |
| Schmitt Trigger Low Input Threshold (except SDA/SCL) | VIL | 0.2 | V | max is 0.2VDD | 11 | ||
| Schmitt Trigger Low Input Threshold SDA/SCL | VIL | -0.5 | 0.3 | V | max is 0.3VDD | 11 | |
| High Voltage Limit | VMAX | 12.5 | V | Pin can tolerate VMAX or less. | 11 | ||
| Output Low Voltage (SDA) | VOL | 0 | 0.4 | V | VDD ≥ 2.0V, IOL = 3 mA | 12 | |
| Weak Pull-up/Pull-down Current | IPU | 1.75 | mA | Internal VDD pull-up, VIHH pull-down, VDD = 5.5V, VIHH = 12.5V | 12 | ||
| Input Leakage Current | IIL | -1 | 1 | µA | VIN = VDD and VIN = VSS | 12 | |
| Pin Capacitance | CIN, COUT | 10 | pF | fC = 3.4 MHz | 12 | ||
| Power Supply Sensitivity 7-bit | PSS | 0.0015 | 0.0035 | %/% | 7-bit VDD = 2.7V to 5.5V, VA = 2.7V, Code = 40h | 12 | |
| VDD voltage | VDD | -0.6 | 7 | V | with respect to VSS | 3 | |
| Voltage on HVC/A0, A1, A2, SCL, SDA | -0.6 | 12.5 | V | with respect to VSS | 3 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0, VI > VDD, VI > VPP ON HV pins | 3 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 3 | |
| Max output current sunk by any output pin | 25 | mA | 3 | ||||
| Max output current sourced by any output pin | 25 | mA | 3 | ||||
| Max current out of VSS pin | 100 | mA | 3 | ||||
| Max current into VDD pin | 100 | mA | 3 | ||||
| Max current into PXA, PXW, PXB pins | -2.5 | 2.5 | mA | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Ambient temperature with power applied | -40 | 125 | °C | 3 | |||
| Soldering temperature of leads | 300 | °C | 10 seconds | 3 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Specified/Operating Temperature Range | TA | -40 | 125 | °C | 16 | ||
| Thermal Resistance, 8L-MSOP | θJA | 211 | °C/W | 16 |
CAD (KiCad official)
- Symbol:
MCP4532-502E - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mcp4532-502e-etched.step/mcp4532-502e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4532-502e.step/mcp4532-502e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (102 pp, sha256
ee77464c39584a73, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).