MCP41HV51-104E

{
  "schema_version": 1,
  "type": "component",
  "slug": "mcp41hv51-104e",
  "title": "MCP41HV51-104E",
  "brief": "Microchip Tech Digital Potentiometers, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "data acquisition",
    "mcp41hv51-104e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MCP41HV51-104E",
    "manufacturer": "Microchip Tech",
    "package": "TSSOP-14",
    "pin_count": 14,
    "category": "Data Acquisition",
    "subcategory": "Digital Potentiometers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882322477629440",
    "parts": {
      "symbol": "mcp41hv51-104e.kicad_sym",
      "footprint": "mcp41hv51-104e.kicad_mod",
      "model_3d": "mcp41hv51-104e-hero.glb",
      "model_3d_plain": "mcp41hv51-104e-etched.glb",
      "model_3d_step": "mcp41hv51-104e-etched.step",
      "model_3d_step_plain": "mcp41hv51-104e.step",
      "lbr": "mcp41hv51-104e.lbr"
    },
    "distributor_links": {
      "lcsc": "C148046"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T02:42:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VL",
        "type": "power_in",
        "description": "Positive digital power supply input referenced to DGND, operating from 1.8V to 5.5V, with a decoupling capacitor to DGND recommended and performance outside specification below VL 2.7V (Vmin)."
      },
      {
        "number": "2",
        "name": "SCK",
        "type": "input",
        "description": "SPI serial clock input with Schmitt trigger, input-only because the device is an SPI slave."
      },
      {
        "number": "3",
        "name": "CS",
        "type": "input",
        "description": "Serial interface chip select input with Schmitt trigger, where forcing CS to VIL enables serial commands."
      },
      {
        "number": "4",
        "name": "SDI",
        "type": "input",
        "description": "SPI serial data input with Schmitt trigger, connected to the host controller SDO pin."
      },
      {
        "number": "5",
        "name": "SDO",
        "type": "output",
        "description": "SPI serial data output used to read the Wiper and TCON registers or monitor the command error bit, connected to the host controller SDI pin."
      },
      {
        "number": "6",
        "name": "WLAT",
        "type": "input",
        "description": "Wiper latch enable input with Schmitt trigger, where 0 transfers the received SPIBUF value to the wiper register and 1 holds the received data in SPIBUF."
      },
      {
        "number": "7",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown input with Schmitt trigger that forces the resistor network terminals into the hardware shutdown state."
      },
      {
        "number": "8",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference for the device, to which VL is referenced."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "Pin not internally connected to the die; to reduce noise coupling, connect to either DGND or VL."
      },
      {
        "number": "10",
        "name": "V-",
        "type": "power_in",
        "description": "Analog negative supply voltage that must not have a higher potential than the DGND pin."
      },
      {
        "number": "11",
        "name": "P0B",
        "type": "bidirectional",
        "description": "Potentiometer 0 Terminal B, the fixed connection to the zero-scale wiper value (0x00), which can carry positive or negative current with voltage between V+ and V-."
      },
      {
        "number": "12",
        "name": "P0W",
        "type": "bidirectional",
        "description": "Potentiometer 0 wiper terminal, which can carry positive or negative current with voltage that must be between V+ and V-."
      },
      {
        "number": "13",
        "name": "P0A",
        "type": "bidirectional",
        "description": "Potentiometer 0 Terminal A, the fixed connection to the full-scale wiper value (0xFF for 8-bit or 0x7F for 7-bit), which can carry positive or negative current with voltage between V+ and V-."
      },
      {
        "number": "14",
        "name": "V+",
        "type": "power_in",
        "description": "Analog positive supply voltage that must be higher than V-, with analog operating range of 10V to 36V for specified performance and a maximum of +36V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 1 VL is printed as '11' in the Table 3-1 text extraction; read as TSSOP pin 1 (VL), consistent w; Ordering code MCP41HV51-104E/ST (marking 41H51104) is the TSSOP-14 variant, so the TSSOP column of T; Table 3-1 lists TSSOP pin 9 as NC; the VQFN NC pins 8, 9, 10, 17-20 map differently and were not use"
        ],
        "pages_sent": 23,
        "cost_usd": 0.0961,
        "at": "2026-10-19T02:42:28"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882322477629440",
        "pages": 92,
        "sha256": "06025745f8b9bc3f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mcp41hv51-104e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mcp41hv51-104e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a83570ac3d8be4f523cf4570321600270bc6ddd921fd52938c30b6b3ffe99d18",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "TSSOP-14",
      "Category": "Data Acquisition",
      "Pins": "14"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "06025745f8b9bc3f002ebe26269a6da97b947042cb5165f11ac96e5fb9b85e45",
      "rows": [
        {
          "name": "Digital positive supply voltage (VL), with respect to DGND",
          "symbol": "VL",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 2.7,
          "typ": null,
          "max": 5.5,
          "conditions": "With respect to DGND",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Digital positive supply voltage (VL), DGND referenced to V-",
          "symbol": "VL",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 5.5,
          "conditions": "DGND = V- + 0.9V (referenced to V-)",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Analog positive supply voltage (V+)",
          "symbol": "V+",
          "kind": "recommended_operating",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 36,
          "conditions": "With respect to V-",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Resistor network supply voltage (VRN)",
          "symbol": "VRN",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 36,
          "conditions": "Delta voltage between V+ and V-",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VL start voltage to ensure wiper reset",
          "symbol": "VDPOR",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 1.8,
          "conditions": "With respect to DGND, V+ > 6.0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "V+ voltage to ensure wiper reset",
          "symbol": "VAPOR",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "With respect to V-, VL = 0V",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Power rail voltage during power-up, digital first",
          "symbol": "VLPOR",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 5.5,
          "conditions": "VL/DGND powers up first; V+ and V- floating or as V+/V- powers up",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Power rail voltage during power-up, analog first",
          "symbol": "V+POR",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 36,
          "conditions": "Analog powers (V+/V-) up first; VL and DGND floating or as VL/DGND powers up",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Delay after device exits the reset state (VL > VBOR)",
          "symbol": "TBORD",
          "kind": "electrical",
          "unit": "us",
          "min": null,
          "typ": 10,
          "max": 20,
          "conditions": "Delay after device exits the reset state (VL > VBOR)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply current, serial interface active",
          "symbol": "IDDD",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": 45,
          "max": 300,
          "conditions": "Serial interface active, write all 0s to volatile wiper 0; VL = 5.5V, CS = VIL, FSCK = 5 MHz, V- = DGND",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply current, serial interface inactive",
          "symbol": "IDDD",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": null,
          "max": 7,
          "conditions": "Serial interface inactive, VL = 5.5V, SCK = VIH, CS = VIH, Wiper = 0, V- = DGND",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Supply current V+ to V-",
          "symbol": "IDDA",
          "kind": "electrical",
          "unit": "uA",
          "min": null,
          "typ": null,
          "max": 5,
          "conditions": "Current V+ to V-, PxA = PxB = PxW, DGND = V- + (V+/2)",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "End-to-end resistance (RAB), 100 kOhm device",
          "symbol": "RAB",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 80,
          "typ": 100,
          "max": 120,
          "conditions": "-104 devices, V+/V- = 10V to 36V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "RAB resistance tolerance",
          "symbol": "RAB",
          "kind": "tolerance",
          "unit": "%",
          "min": -20,
          "typ": null,
          "max": 20,
          "conditions": "(± 20%) as printed on RAB row",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "RAB current",
          "symbol": "IAB",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 0.45,
          "conditions": "-104 devices; 36V / RAB(MIN), V- = -18V, V+ = +18V",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Wiper resistance RW",
          "symbol": "RW",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": 75,
          "max": 170,
          "conditions": "IW = 1 mA, V+ = +18V, V- = -18V, code = 00h, PxA floating, PxB = V-",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Wiper resistance RW at 5 V supply",
          "symbol": "RW",
          "kind": "electrical",
          "unit": "Ω",
          "min": null,
          "typ": 145,
          "max": 200,
          "conditions": "IW = 1 mA, V+ = +5.0V, V- = -5.0V, code = 00h, PxA floating, PxB = V-",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Terminal current IT (A, B, W), 100 kOhm device",
          "symbol": "IT, IW",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 6.5,
          "conditions": "-104 devices, IBW(W ≠ ZS) and IAW(W ≠ FS)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Terminal current at zero-scale or full-scale wiper",
          "symbol": "IT, IW",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 36,
          "conditions": "IBW(W = ZS), or IAW(W = FS)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Nominal resistance temperature coefficient (RAB/T)",
          "symbol": "RAB/T",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 50,
          "max": null,
          "conditions": "TA = -40°C to +85°C",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Nominal resistance temperature coefficient (RAB/T)",
          "symbol": "RAB/T",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 100,
          "max": null,
          "conditions": "TA = -40°C to +125°C",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Ratiometric tempco (VWB/T)",
          "symbol": "VWB/T",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 15,
          "max": null,
          "conditions": "Code = Mid-scale (80h or 40h)",
          "source_page": 6,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current IIL",
          "symbol": "IIL",
          "kind": "electrical",
          "unit": "uA",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "VIN = VL and VIN = DGND",
          "source_page": 13,
          "source": "datasheet"
        },
        {
          "name": "Power supply sensitivity (PSS), 8-bit",
          "symbol": "PSS",
          "kind": "electrical",
          "unit": "%/%",
          "min": null,
          "typ": 0.0015,
          "max": 0.0035,
          "conditions": "8-bit, VL = 2.7V to 5.5V, V+ = 18V, V- = -18V, code = 7Fh",
          "source_page": 14,
          "source": "datasheet"
        },
        {
          "name": "Full-scale error VWFSE, 100k 8-bit",
          "symbol": "VWFSE",
          "kind": "electrical",
          "unit": "LSb",
          "min": -0.7,
          "typ": null,
          "max": null,
          "conditions": "100k 8-bit, VAB = 20V to 36V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Full-scale error VWFSE, 100k 8-bit",
          "symbol": "VWFSE",
          "kind": "electrical",
          "unit": "LSb",
          "min": -0.95,
          "typ": null,
          "max": null,
          "conditions": "100k 8-bit, VAB = 10V to 36V",
          "source_page": 7,
          "source": "datasheet"
        },
        {
          "name": "Zero-scale error VWZSE, 100k 8-bit",
          "symbol": "VWZSE",
          "kind": "electrical",
          "unit": "LSb",
          "min": null,
          "typ": null,
          "max": 0.5,
          "conditions": "100k 8-bit, VAB = 20V to 36V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Zero-scale error VWZSE, 100k 8-bit",
          "symbol": "VWZSE",
          "kind": "electrical",
          "unit": "LSb",
          "min": null,
          "typ": null,
          "max": 0.95,
          "conditions": "100k 8-bit, VAB = 10V to 36V",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Zero-scale error VWZSE, 100k 8-bit",
          "symbol": "VWZSE",
          "kind": "electrical",
          "unit": "LSb",
          "min": null,
          "typ": null,
          "max": 0.7,
          "conditions": "100k 8-bit, VAB = 10V to 36V, -40°C ≤ TA ≤ +85°C",
          "source_page": 8,
          "source": "datasheet"
        },
        {
          "name": "Potentiometer integral nonlinearity P-INL, 100k 8-bit",
          "symbol": "P-INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1.85,
          "typ": 0.5,
          "max": 1.85,
          "conditions": "100k 8-bit, VAB = 10V to 36V",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Potentiometer integral nonlinearity P-INL, 100k 8-bit",
          "symbol": "P-INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1.2,
          "typ": 0.5,
          "max": 1.2,
          "conditions": "100k 8-bit, VAB = 20V to 36V",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Potentiometer integral nonlinearity P-INL, 100k 8-bit",
          "symbol": "P-INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1,
          "typ": 0.5,
          "max": 1,
          "conditions": "100k 8-bit, VAB = 10V to 36V, -40°C ≤ TA ≤ +85°C",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Potentiometer differential nonlinearity P-DNL, 100k 8-bit",
          "symbol": "P-DNL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -0.25,
          "typ": 0.125,
          "max": 0.25,
          "conditions": "100k 8-bit, VAB = 10V to 36V",
          "source_page": 9,
          "source": "datasheet"
        },
        {
          "name": "Rheostat integral nonlinearity R-INL, 100k 8-bit",
          "symbol": "R-INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1,
          "typ": null,
          "max": 1,
          "conditions": "100k 8-bit, IW = 300 µA, (V+ - V-) = 36V",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Rheostat integral nonlinearity R-INL, 100k 8-bit",
          "symbol": "R-INL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -1.2,
          "typ": null,
          "max": 1.2,
          "conditions": "100k 8-bit, IW = 83 µA, (V+ - V-) = 10V",
          "source_page": 11,
          "source": "datasheet"
        },
        {
          "name": "Rheostat differential nonlinearity R-DNL, 100k 8-bit",
          "symbol": "R-DNL",
          "kind": "electrical",
          "unit": "LSb",
          "min": -0.5,
          "typ": null,
          "max": 0.5,
          "conditions": "100k 8-bit, IW = 300 µA, (V+ - V-) = 36V",
          "source_page": 12,
          "source": "datasheet"
        },
        {
          "name": "Voltage on V- with respect to DGND",
          "symbol": "V-",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -40,
          "typ": null,
          "max": null,
          "conditions": "With respect to DGND; printed as DGND + 0.6V to -40.0V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage on V+ with respect to DGND",
          "symbol": "V+",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 40,
          "conditions": "With respect to DGND; printed as DGND - 0.3V to 40.0V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage on VL with respect to DGND",
          "symbol": "VL",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": 7,
          "conditions": "With respect to DGND",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage on CS, SCK, SDI, WLAT, SHDN with respect to DGND",
          "symbol": "VI",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.6,
          "typ": null,
          "max": null,
          "conditions": "With respect to DGND; max is VL + 0.6V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Voltage on PxA, PxW, PxB with respect to V-",
          "symbol": "VPx",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": null,
          "conditions": "With respect to V-; max is V+ + 0.3V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum continuous current into PxA, PxW, PxB, RAB = 100k",
          "symbol": "IPx",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -6.5,
          "typ": null,
          "max": 6.5,
          "conditions": "Continuous, RAB = 100 k",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Package power dissipation, TSSOP-14",
          "symbol": "PD",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 1000,
          "conditions": "TA = +50°C, TJ = +150°C",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "ESD protection, Human Body Model (HBM)",
          "symbol": "ESD",
          "kind": "absolute_maximum",
          "unit": "kV",
          "min": -4,
          "typ": null,
          "max": 4,
          "conditions": "Human body model, all pins",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Maximum junction temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Ambient temperature with power applied",
          "symbol": "TA",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "With power applied",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Operating temperature range",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "Extended temperature range",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance, junction to ambient, 14L-TSSOP",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 100,
          "max": null,
          "conditions": "14L-TSSOP (ST)",
          "source_page": 19,
          "source": "datasheet"
        },
        {
          "name": "SCK input frequency FSCK",
          "symbol": "FSCK",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "VL = 2.7V to 5.5V",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "SCK input frequency FSCK",
          "symbol": "FSCK",
          "kind": "timing",
          "unit": "MHz",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "VL = 1.8V to 2.7V",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "SCK input high time",
          "symbol": "TscH",
          "kind": "timing",
          "unit": "ns",
          "min": 35,
          "typ": null,
          "max": null,
          "conditions": "VL = 2.7V to 5.5V",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "SCK input low time",
          "symbol": "TscL",
          "kind": "timing",
          "unit": "ns",
          "min": 35,
          "typ": null,
          "max": null,
          "conditions": "VL = 2.7V to 5.5V",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "SDO data output valid after SCK edge",
          "symbol": "TscL2DOV",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 55,
          "conditions": "VL = 2.7V to 5.5V",
          "source_page": 17,
          "source": "datasheet"
        },
        {
          "name": "CS inactive (VIH) after SCK edge",
          "symbol": "TscH2csI",
          "kind": "timing",
          "unit": "ns",
          "min": 100,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 17,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mcp41hv51-104e"
  ],
  "discovery_pitch": "MCP41HV51-104E (Microchip Tech) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mcp41hv51-104e.kicad_sym",
    "mcp41hv51-104e.kicad_mod",
    "mcp41hv51-104e.glb",
    "mcp41hv51-104e.step",
    "mcp41hv51-104e.lbr",
    "docs/hero.png",
    "docs/mcp41hv51-104e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mcp41hv51-104e-hero.glb",
    "mcp41hv51-104e-hero.overlay.json",
    "mcp41hv51-104e-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}