main
Ray Publish 0.1.0 fe80d99

MCP4023T-202E

Microchip Tech · Digital Potentiometers · SOT-23-6

MCP4023T-202E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Positive power supply input, operating from 2.7V to 5.5V relative to VSS, with a decoupling capacitor on VDD to VSS recommended for maximum performance.
2 VSS power_in Device ground reference for the digital potentiometer.
3 U/D input TTL-compatible increment/decrement input; an increment moves the wiper one step toward terminal A and a decrement moves it one step toward terminal B.
4 CS input TTL-compatible chip select input that enables serial commands when driven to VIL and high-voltage serial commands when driven to VIHH, with an internal pull-up that holds it high when floating.
5 W bidirectional Potentiometer wiper terminal (analog I/O) whose voltage must be between VSS and VDD, and which can carry both positive and negative current.
6 A bidirectional Potentiometer terminal A (analog I/O), fixed connection to the 0x3F tap, whose voltage must be between VSS and VDD and which can carry both positive and negative current.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category ADC/DAC/Data Conversion
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 2.7 5.5 V 2
Supply Current (serial interface inactive) IDD 0.3 1 µA Serial Interface Inactive (CS = VIH, U/D = VIH) 2
Supply Current (EE write cycle) IDD 0.6 3 mA EE Write cycle, TA = +25°C 2
Resistance (RAB), -202 device RAB 1.68 2.1 2.52 kΩ -202 devices (Note 1) 2
Resistance tolerance, -202 device RAB -20 20 % -202 devices (Note 1) 2
Wiper Resistance (RW) at 5.5V RW 70 125 Ω 5.5V 3
Wiper Resistance (RW) at 2.7V RW 70 325 Ω 2.7V 3
Full-Scale Error VWFSE -0.5 -0.1 0.5 LSb Code 3Fh (MCP4021/23 only) 3
Zero-Scale Error VWZSE -0.5 0.1 0.5 LSb Code 00h (MCP4021/23 only) 3
Potentiometer Integral Non-linearity INL -0.5 0.25 0.5 LSb MCP4021/23 only (Note 2) 3
Potentiometer Differential Non-linearity DNL -0.5 0.25 0.5 LSb MCP4021/23 only (Note 2) 3
Maximum current through A, W or B IW 2.5 mA Note 6 3
CS Input Voltage VCS 12.5 V CS pin at VIL, VIH or VIHH (Note 6) 2
High-Voltage Input Entry Voltage (WiperLock threshold) VIHH 8.5 12.5 V +7°C to +125°C 5
High-Voltage Input Entry Voltage (WiperLock threshold) VIHH 9 12.5 V -40°C to +125°C 5
Input Leakage Current (CS, U/D) IIL -1 1 µA VIN = VDD 5
Power Supply Sensitivity (MCP4021 and MCP4023 only) PSS 0.0015 0.0035 %/% VDD = 4.5V to 5.5V, VA = 4.5V, Code = 1Fh 5
CS Low Time tCSLO 5 µs 6
CS High Time tCSHI 500 ns 6
U/D to CS Hold Time tLUC 500 ns 6
CS to U/D Low Setup Time tLCUF 500 ns 6
CS to U/D High Setup Time tLCUR 3 µs 6
U/D High Time tHI 500 ns 6
U/D Low Time tLO 500 ns 6
Up/Down Toggle Frequency fUD 1 MHz 6
Wiper Settling Time (-202 device) tS 0.5 µs 2.1 k CL = 100 pF 6
Internal EEPROM Write Time twc 5 ms @25°C 6
Internal EEPROM Write Time twc 10 ms -40°C to +125°C 6
HV U/D to CS Hold Time tHUC 1.5 µs 8
HV CS to U/D Low Setup Time tHCUF 8 µs 8
HV CS to U/D High Setup Time tHCUR 4.5 µs 8
Specified Temperature Range TA -40 125 °C 10
Operating Temperature Range TA -40 125 °C 10
VDD (absolute maximum) VDD 6.5 V 2
CS and U/D inputs w.r.t VSS VCS, VUD -0.3 12.5 V 2
A, B and W terminals w.r.t VSS VA, VB, VW -0.3 V 2
Current at Input Pins -10 10 mA 2
Current at Supply Pins -10 10 mA 2
Current at Potentiometer Pins -2.5 2.5 mA 2
Storage Temperature TSTG -65 150 °C 2
Ambient Temperature with power applied TA -55 125 °C 2
Maximum Junction Temperature TJ 150 °C 2
Nominal Resistance Tempco R/T 50 ppm/°C TA = -20°C to +70°C 3
Nominal Resistance Tempco R/T 100 ppm/°C TA = -40°C to +85°C 3
Nominal Resistance Tempco R/T 150 ppm/°C TA = -40°C to +125°C 3
Ratiometric Tempco VWA/T 10 ppm/°C MCP4021 and MCP4023 only, code = 1Fh 3
Supply Current at 5.5V IDD 45 µA 5.5V, CS = VSS, fU/D = 1 MHz 2
Supply Current at 2.7V IDD 15 µA 2.7V, CS = VSS, fU/D = 1 MHz 2
Leakage current into A, W or B IWL 100 nA MCP4022/23 A = W = VSS 3
Capacitance (PA) CAW 75 pF f = 1 MHz, code = 1Fh 3
Capacitance (PW) CW 120 pF f = 1 MHz, code = 1Fh 3
Capacitance (PB) CBW 75 pF f = 1 MHz, code = 1Fh 3
Bandwidth -3 dB (-202 device) BW 4 MHz -202 devices, Code = 1F, output load = 30 pF 3
CS Pull-up/Pull-down Resistance RCS 16 kΩ VDD = 5.5V, VCS = 3V 5
CS Weak Pull-up/Pull-down Current IPU 170 µA VDD = 5.5V, VCS = 3V 5
CS and U/D Pin Capacitance CIN, COUT 10 pF fC = 1 MHz 5
Wiper Response on Power-Up tPU 200 ns 6
Thermal Resistance, 6L-SOT-23 θJA 230 °C/W 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 65

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MCP4023T-202E
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp4023t-202e-ch-etched.step / mcp4023t-202e-ch-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4023t-202e-ch.step / mcp4023t-202e-ch.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (74 pp, sha256 6d9ee87ab7f5b4fc, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF