main
Ray
Publish 0.1.0
e567409
MCP4022T-503E
Microchip Tech · Digital Potentiometers · SOT-23-6
MCP4022T-503E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply input, relative to VSS, which can range from 2.7V to 5.5V; a decoupling capacitor on VDD to VSS is recommended for maximum performance. |
| 2 | VSS | power_in | Ground pin and device ground reference. |
| 3 | U/D | input | Increment/Decrement TTL-compatible input; an increment moves the wiper one step toward terminal A, and a decrement moves it one step toward terminal B. |
| 4 | CS | input | TTL chip select input with an internal pull-up; forcing VIL enables serial commands and forcing VIHH enables high-voltage commands that also control WiperLock, and the pin is pulled to VIH when floating. |
| 5 | W | passive | Potentiometer wiper terminal, the adjustable terminal of the digital potentiometer; voltage must be between VSS and VDD and it can carry both positive and negative current. |
| 6 | A | passive | Potentiometer terminal A, the fixed connection to the 0x3F tap; voltage must be between VSS and VDD and it can carry both positive and negative current, with no polarity relative to W or B. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Data Converters |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | 5.5 | V | 2 | ||
| CS Input Voltage | VCS | 12.5 | V | 2 | |||
| Supply Current, serial interface inactive | IDD | 0.3 | 1 | µA | Serial Interface Inactive (CS = VIH, U/D = VIH) | 2 | |
| Supply Current, EE write cycle | IDD | 0.6 | 3 | mA | EE Write cycle, TA = +25°C | 2 | |
| Resistance (-503 device, nominal RAB) | RAB | 40 | 50 | 60 | k | -503 devices (Note 1) | 2 |
| Resistance tolerance (-503 device) | RAB | -20 | 20 | % | -503 devices | 2 | |
| Wiper Resistance | RW | 70 | 125 | Ω | 5.5V (Note 3, Note 4) | 3 | |
| Wiper Resistance | RW | 70 | 325 | Ω | 2.7V (Note 3, Note 4) | 3 | |
| Maximum current through A, W or B | IW | 2.5 | mA | Note 6 | 3 | ||
| Rheostat Integral Non-linearity, 50 k device (MCP4022/24 values) | R-INL | -1 | 0.25 | 1 | LSb | -503 devices (50 k); Note 4, Note 7 | 4 |
| Rheostat Differential Non-linearity, 50 k device (MCP4022/24 values) | R-DNL | -0.5 | 0 | 0.5 | LSb | -503 devices (50 k); Note 4, Note 7 | 4 |
| Input Leakage Current | IIL | -1 | 1 | µA | VIN = VDD | 5 | |
| High-Voltage Input Entry Voltage (Threshold for WiperLock Technology) | VIHH | 8.5 | 12.5 | V | +7°C to +125°C | 5 | |
| High-Voltage Input Entry Voltage (Threshold for WiperLock Technology) | VIHH | 9 | 12.5 | V | -40°C to +125°C | 5 | |
| CS Low Time | tCSLO | 5 | µs | 6 | |||
| CS High Time | tCSHI | 500 | ns | 6 | |||
| U/D to CS Hold Time | tLUC | 500 | ns | 6 | |||
| CS to U/D Low Setup Time | tLCUF | 500 | ns | 6 | |||
| CS to U/D High Setup Time | tLCUR | 3 | µs | 6 | |||
| U/D High Time | tHI | 500 | ns | 6 | |||
| U/D Low Time | tLO | 500 | ns | 6 | |||
| Up/Down Toggle Frequency | fUD | 1 | MHz | 6 | |||
| Wiper Settling Time, 50 k device | tS | 5 | µs | 50 k CL = 100 pF | 6 | ||
| HV U/D to CS Hold Time | tHUC | 1.5 | µs | 8 | |||
| HV CS to U/D Low Setup Time | tHCUF | 8 | µs | 8 | |||
| HV CS to U/D High Setup Time | tHCUR | 4.5 | µs | 8 | |||
| Internal EEPROM Write Time | twc | 5 | ms | @25°C | 6 | ||
| Internal EEPROM Write Time | twc | 10 | ms | -40°C to +125°C | 6 | ||
| VDD (absolute maximum) | VDD | 6.5 | V | 2 | |||
| CS and U/D inputs w.r.t VSS | -0.3 | 12.5 | V | 2 | |||
| A, B and W terminals w.r.t VSS | -0.3 | V | 2 | ||||
| Current at Input Pins | -10 | 10 | mA | 2 | |||
| Current at Supply Pins | -10 | 10 | mA | 2 | |||
| Current at Potentiometer Pins | -2.5 | 2.5 | mA | 2 | |||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Ambient temp. with power applied | -55 | 125 | °C | 2 | |||
| Maximum Junction Temperature (TJ) | TJ | 150 | °C | 2 | |||
| Specified Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Storage Temperature Range | TA | -65 | 150 | °C | 10 | ||
| Step Resistance | RS | 793.65 | Ω | Table 6-1, MCP402X-503E | 42 | ||
| Nominal Resistance Tempco | R/T | 50 | ppm/°C | TA = -20°C to +70°C | 3 | ||
| Nominal Resistance Tempco | R/T | 100 | ppm/°C | TA = -40°C to +85°C | 3 | ||
| Nominal Resistance Tempco | R/T | 150 | ppm/°C | TA = -40°C to +125°C | 3 | ||
| Thermal Resistance, 6L-SOT-23 | JA | 230 | °C/W | 10 | |||
| Supply Current, 5.5V | IDD | 45 | µA | 5.5V, CS = VSS, fU/D = 1 MHz | 2 | ||
| Supply Current, 2.7V | IDD | 15 | µA | 2.7V, CS = VSS, fU/D = 1 MHz | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 65 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
MCP4022T-503E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mcp4022t-503e-ch-etched.step/mcp4022t-503e-ch-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4022t-503e-ch.step/mcp4022t-503e-ch.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (74 pp, sha256
6d9ee87ab7f5b4fc, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# MCP4022T-503E
**Microchip Tech** · Digital Potentiometers · SOT-23-6
MCP4022T-503E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply input, relative to VSS, which can range from 2.7V to 5.5V; a decoupling capacitor on VDD to VSS is recommended for maximum performance. |
| 2 | VSS | power_in | Ground pin and device ground reference. |
| 3 | U/D | input | Increment/Decrement TTL-compatible input; an increment moves the wiper one step toward terminal A, and a decrement moves it one step toward terminal B. |
| 4 | CS | input | TTL chip select input with an internal pull-up; forcing VIL enables serial commands and forcing VIHH enables high-voltage commands that also control WiperLock, and the pin is pulled to VIH when floating. |
| 5 | W | passive | Potentiometer wiper terminal, the adjustable terminal of the digital potentiometer; voltage must be between VSS and VDD and it can carry both positive and negative current. |
| 6 | A | passive | Potentiometer terminal A, the fixed connection to the 0x3F tap; voltage must be between VSS and VDD and it can carry both positive and negative current, with no polarity relative to W or B. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Data Converters |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | | 5.5 | V | | 2 |
| CS Input Voltage | VCS | | | 12.5 | V | | 2 |
| Supply Current, serial interface inactive | IDD | | 0.3 | 1 | µA | Serial Interface Inactive (CS = VIH, U/D = VIH) | 2 |
| Supply Current, EE write cycle | IDD | | 0.6 | 3 | mA | EE Write cycle, TA = +25°C | 2 |
| Resistance (-503 device, nominal RAB) | RAB | 40 | 50 | 60 | k | -503 devices (Note 1) | 2 |
| Resistance tolerance (-503 device) | RAB | -20 | | 20 | % | -503 devices | 2 |
| Wiper Resistance | RW | | 70 | 125 | Ω | 5.5V (Note 3, Note 4) | 3 |
| Wiper Resistance | RW | | 70 | 325 | Ω | 2.7V (Note 3, Note 4) | 3 |
| Maximum current through A, W or B | IW | | | 2.5 | mA | Note 6 | 3 |
| Rheostat Integral Non-linearity, 50 k device (MCP4022/24 values) | R-INL | -1 | 0.25 | 1 | LSb | -503 devices (50 k); Note 4, Note 7 | 4 |
| Rheostat Differential Non-linearity, 50 k device (MCP4022/24 values) | R-DNL | -0.5 | 0 | 0.5 | LSb | -503 devices (50 k); Note 4, Note 7 | 4 |
| Input Leakage Current | IIL | -1 | | 1 | µA | VIN = VDD | 5 |
| High-Voltage Input Entry Voltage (Threshold for WiperLock Technology) | VIHH | 8.5 | | 12.5 | V | +7°C to +125°C | 5 |
| High-Voltage Input Entry Voltage (Threshold for WiperLock Technology) | VIHH | 9 | | 12.5 | V | -40°C to +125°C | 5 |
| CS Low Time | tCSLO | 5 | | | µs | | 6 |
| CS High Time | tCSHI | 500 | | | ns | | 6 |
| U/D to CS Hold Time | tLUC | 500 | | | ns | | 6 |
| CS to U/D Low Setup Time | tLCUF | 500 | | | ns | | 6 |
| CS to U/D High Setup Time | tLCUR | 3 | | | µs | | 6 |
| U/D High Time | tHI | 500 | | | ns | | 6 |
| U/D Low Time | tLO | 500 | | | ns | | 6 |
| Up/Down Toggle Frequency | fUD | | | 1 | MHz | | 6 |
| Wiper Settling Time, 50 k device | tS | 5 | | | µs | 50 k CL = 100 pF | 6 |
| HV U/D to CS Hold Time | tHUC | 1.5 | | | µs | | 8 |
| HV CS to U/D Low Setup Time | tHCUF | 8 | | | µs | | 8 |
| HV CS to U/D High Setup Time | tHCUR | 4.5 | | | µs | | 8 |
| Internal EEPROM Write Time | twc | | | 5 | ms | @25°C | 6 |
| Internal EEPROM Write Time | twc | | | 10 | ms | -40°C to +125°C | 6 |
| VDD (absolute maximum) | VDD | | | 6.5 | V | | 2 |
| CS and U/D inputs w.r.t VSS | | -0.3 | | 12.5 | V | | 2 |
| A, B and W terminals w.r.t VSS | | -0.3 | | | V | | 2 |
| Current at Input Pins | | -10 | | 10 | mA | | 2 |
| Current at Supply Pins | | -10 | | 10 | mA | | 2 |
| Current at Potentiometer Pins | | -2.5 | | 2.5 | mA | | 2 |
| Storage temperature | | -65 | | 150 | °C | | 2 |
| Ambient temp. with power applied | | -55 | | 125 | °C | | 2 |
| Maximum Junction Temperature (TJ) | TJ | | | 150 | °C | | 2 |
| Specified Temperature Range | TA | -40 | | 125 | °C | | 10 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 10 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 10 |
| Step Resistance | RS | | 793.65 | | Ω | Table 6-1, MCP402X-503E | 42 |
| Nominal Resistance Tempco | R/T | | 50 | | ppm/°C | TA = -20°C to +70°C | 3 |
| Nominal Resistance Tempco | R/T | | 100 | | ppm/°C | TA = -40°C to +85°C | 3 |
| Nominal Resistance Tempco | R/T | | 150 | | ppm/°C | TA = -40°C to +125°C | 3 |
| Thermal Resistance, 6L-SOT-23 | JA | | 230 | | °C/W | | 10 |
| Supply Current, 5.5V | IDD | | 45 | | µA | 5.5V, CS = VSS, fU/D = 1 MHz | 2 |
| Supply Current, 2.7V | IDD | | 15 | | µA | 2.7V, CS = VSS, fU/D = 1 MHz | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 65 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `MCP4022T-503E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `mcp4022t-503e-ch-etched.step` / `mcp4022t-503e-ch-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp4022t-503e-ch.step` / `mcp4022t-503e-ch.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/20001945F.pdf) (74 pp, sha256 `6d9ee87ab7f5b4fc`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/mcp4022t-503e-ch-datasheet.pdf)