component
MCP4022T-202E
Public Made by Adomby adom
Microchip Tech Digital Potentiometers, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
MCP4022T-202E
Microchip Tech · Digital Potentiometers · SOT-23-6
MCP4022T-202E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply input, relative to VSS, ranging from 2.7V to 5.5V, with a decoupling capacitor to VSS recommended. |
| 2 | VSS | power_in | Device ground reference. |
| 3 | U/D | input | TTL-compatible increment/decrement input; an increment moves the wiper one step toward terminal A and a decrement moves it one step toward terminal B. |
| 4 | CS | input | TTL-compatible chip select input with internal pull-up; VIL enables serial commands and VIHH enables high-voltage commands that save the wiper to EEPROM and enable or disable WiperLock. |
| 5 | W | passive | Potentiometer wiper terminal, the adjustable terminal, with no polarity relative to A or B, supporting positive and negative current, and its voltage must be between VSS and VDD. |
| 6 | A | passive | Potentiometer terminal A, the fixed connection to the 0x3F end of the potentiometer, with no polarity, supporting positive and negative current, and its voltage must be between VSS and VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | ADC/DAC/Data Conversion |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | 5.5 | V | 2 | ||
| CS Input Voltage | VCS | 12.5 | V | min VSS; CS pin at one of three input levels (VIL, VIH or VIHH) | 2 | ||
| Supply Current, serial interface inactive | IDD | 0.3 | 1 | µA | Serial Interface Inactive (CS = VIH, U/D = VIH) | 2 | |
| Supply Current, EE write cycle | IDD | 0.6 | 3 | mA | EE Write cycle, TA = +25°C | 2 | |
| Supply Current at 5.5V | IDD | 45 | µA | 5.5V, CS = VSS, fU/D = 1 MHz | 2 | ||
| Supply Current at 2.7V | IDD | 15 | µA | 2.7V, CS = VSS, fU/D = 1 MHz | 2 | ||
| Resistance (±20%), -202 device | RAB | 1.68 | 2.1 | 2.52 | kΩ | -202 devices (Note 1) | 2 |
| Resolution | N | 64 | Taps | No Missing Codes | 2 | ||
| Wiper Resistance | RW | 70 | 125 | Ω | 5.5V | 3 | |
| Wiper Resistance | RW | 70 | 325 | Ω | 2.7V | 3 | |
| Resistor Terminal Input Voltage Range | VA,VW,VB | 0 | V | Vss to VDD; Note 5, Note 6 | 3 | ||
| Maximum current through A, W or B | IW | 2.5 | mA | Note 6 | 3 | ||
| Rheostat INL, -202, 5.5V | R-INL | -0.5 | 0.25 | 0.5 | LSb | -202 devices (2.1 k), 5.5V | 4 |
| Rheostat INL, -202, 2.7V | R-INL | -8.5 | 4.5 | 8.5 | LSb | -202 devices (2.1 k), 2.7V (Note 7) | 4 |
| Rheostat DNL, -202, 5.5V | R-DNL | -0.5 | 0.25 | 0.5 | LSb | -202 devices (2.1 k), 5.5V | 4 |
| Rheostat DNL, -202, 2.7V | R-DNL | -1 | 0.5 | 2 | LSb | -202 devices (2.1 k), 2.7V (Note 7) | 4 |
| Input High Voltage | VIH | 0.7 | V | 0.7 VDD (min, as multiple of VDD) | 5 | ||
| Input Low Voltage | VIL | 0.3 | V | 0.3 VDD (max, as multiple of VDD) | 5 | ||
| High-Voltage Input Entry Voltage | VIHH | 9 | 12.5 | V | -40°C to +125°C | 5 | |
| High-Voltage Input Entry Voltage | VIHH | 8.5 | 12.5 | V | +7°C to +125°C | 5 | |
| High-Voltage Input Exit Voltage | VIHH | 0.8 | V | max is VDD+0.8 V | 5 | ||
| Input Leakage Current | IIL | -1 | 1 | µA | VIN = VDD | 5 | |
| Power Supply Sensitivity | PSS | 0.0015 | 0.0035 | %/% | MCP4021/4023 only; not applicable to MCP4022 | 5 | |
| CS Low Time | tCSLO | 5 | µs | 6 | |||
| CS High Time | tCSHI | 500 | ns | 6 | |||
| U/D to CS Hold Time | tLUC | 500 | ns | 6 | |||
| CS to U/D Low Setup Time | tLCUF | 500 | ns | 6 | |||
| CS to U/D High Setup Time | tLCUR | 3 | µs | 6 | |||
| U/D High Time | tHI | 500 | ns | 6 | |||
| U/D Low Time | tLO | 500 | ns | 6 | |||
| Up/Down Toggle Frequency | fUD | 1 | MHz | 6 | |||
| Wiper Settling Time, 2.1 k | tS | 0.5 | µs | 2.1 k CL = 100 pF | 6 | ||
| HV U/D to CS Hold Time | tHUC | 1.5 | µs | 8 | |||
| HV CS to U/D Low Setup Time | tHCUF | 8 | µs | 8 | |||
| HV CS to U/D High Setup Time | tHCUR | 4.5 | µs | 8 | |||
| Internal EEPROM Write Time | twc | 5 | ms | @25°C | 6 | ||
| Internal EEPROM Write Time | twc | 10 | ms | -40°C to +125°C | 6 | ||
| Nominal Resistance Tempco | ΔR/ΔT | 50 | ppm/°C | TA = -20°C to +70°C | 3 | ||
| Nominal Resistance Tempco | ΔR/ΔT | 100 | ppm/°C | TA = -40°C to +85°C | 3 | ||
| Nominal Resistance Tempco | ΔR/ΔT | 150 | ppm/°C | TA = -40°C to +125°C | 3 | ||
| Bandwidth -3 dB, -202 | BW | 4 | MHz | -202 devices, Code = 1F, output load = 30 pF | 3 | ||
| Capacitance (PA) | CAW | 75 | pF | f =1 MHz, code = 1Fh | 3 | ||
| Capacitance (PW) | CW | 120 | pF | f =1 MHz, code = 1Fh | 3 | ||
| Capacitance (PB) | CBW | 75 | pF | f =1 MHz, code = 1Fh | 3 | ||
| Supply Voltage | VDD | 6.5 | V | 2 | |||
| CS and U/D inputs w.r.t VSS | -0.3 | 12.5 | V | 2 | |||
| A, B and W terminals w.r.t VSS | -0.3 | 6 | V | -0.3V to VDD + 0.3V (printed as VDD + 0.3V) | 2 | ||
| Current at Input Pins | -10 | 10 | mA | ±10 mA | 2 | ||
| Current at Supply Pins | -10 | 10 | mA | ±10 mA | 2 | ||
| Current at Potentiometer Pins | -2.5 | 2.5 | mA | ±2.5 mA | 2 | ||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Ambient temp. with power applied | -55 | 125 | °C | 2 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| ESD protection on all pins (HBM) | 4 | kV | HBM; 400V MM | 2 | |||
| Operating Temperature Range | TA | -40 | 125 | °C | 10 | ||
| Thermal Resistance, 6L-SOT-23 | θJA | 230 | °C/W | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 65 |
CAD (KiCad official)
- Symbol:
MCP4022T-202E - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
mcp4022t-202e-etched.step/mcp4022t-202e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp4022t-202e.step/mcp4022t-202e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (74 pp, sha256
6d9ee87ab7f5b4fc, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP4022T-202E
**Microchip Tech** · Digital Potentiometers · SOT-23-6
MCP4022T-202E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive power supply input, relative to VSS, ranging from 2.7V to 5.5V, with a decoupling capacitor to VSS recommended. |
| 2 | VSS | power_in | Device ground reference. |
| 3 | U/D | input | TTL-compatible increment/decrement input; an increment moves the wiper one step toward terminal A and a decrement moves it one step toward terminal B. |
| 4 | CS | input | TTL-compatible chip select input with internal pull-up; VIL enables serial commands and VIHH enables high-voltage commands that save the wiper to EEPROM and enable or disable WiperLock. |
| 5 | W | passive | Potentiometer wiper terminal, the adjustable terminal, with no polarity relative to A or B, supporting positive and negative current, and its voltage must be between VSS and VDD. |
| 6 | A | passive | Potentiometer terminal A, the fixed connection to the 0x3F end of the potentiometer, with no polarity, supporting positive and negative current, and its voltage must be between VSS and VDD. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | ADC/DAC/Data Conversion |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 2.7 | | 5.5 | V | | 2 |
| CS Input Voltage | VCS | | | 12.5 | V | min VSS; CS pin at one of three input levels (VIL, VIH or VIHH) | 2 |
| Supply Current, serial interface inactive | IDD | | 0.3 | 1 | µA | Serial Interface Inactive (CS = VIH, U/D = VIH) | 2 |
| Supply Current, EE write cycle | IDD | | 0.6 | 3 | mA | EE Write cycle, TA = +25°C | 2 |
| Supply Current at 5.5V | IDD | | 45 | | µA | 5.5V, CS = VSS, fU/D = 1 MHz | 2 |
| Supply Current at 2.7V | IDD | | 15 | | µA | 2.7V, CS = VSS, fU/D = 1 MHz | 2 |
| Resistance (±20%), -202 device | RAB | 1.68 | 2.1 | 2.52 | kΩ | -202 devices (Note 1) | 2 |
| Resolution | N | | 64 | | Taps | No Missing Codes | 2 |
| Wiper Resistance | RW | | 70 | 125 | Ω | 5.5V | 3 |
| Wiper Resistance | RW | | 70 | 325 | Ω | 2.7V | 3 |
| Resistor Terminal Input Voltage Range | VA,VW,VB | 0 | | | V | Vss to VDD; Note 5, Note 6 | 3 |
| Maximum current through A, W or B | IW | | | 2.5 | mA | Note 6 | 3 |
| Rheostat INL, -202, 5.5V | R-INL | -0.5 | 0.25 | 0.5 | LSb | -202 devices (2.1 k), 5.5V | 4 |
| Rheostat INL, -202, 2.7V | R-INL | -8.5 | 4.5 | 8.5 | LSb | -202 devices (2.1 k), 2.7V (Note 7) | 4 |
| Rheostat DNL, -202, 5.5V | R-DNL | -0.5 | 0.25 | 0.5 | LSb | -202 devices (2.1 k), 5.5V | 4 |
| Rheostat DNL, -202, 2.7V | R-DNL | -1 | 0.5 | 2 | LSb | -202 devices (2.1 k), 2.7V (Note 7) | 4 |
| Input High Voltage | VIH | 0.7 | | | V | 0.7 VDD (min, as multiple of VDD) | 5 |
| Input Low Voltage | VIL | | | 0.3 | V | 0.3 VDD (max, as multiple of VDD) | 5 |
| High-Voltage Input Entry Voltage | VIHH | 9 | | 12.5 | V | -40°C to +125°C | 5 |
| High-Voltage Input Entry Voltage | VIHH | 8.5 | | 12.5 | V | +7°C to +125°C | 5 |
| High-Voltage Input Exit Voltage | VIHH | | | 0.8 | V | max is VDD+0.8 V | 5 |
| Input Leakage Current | IIL | -1 | | 1 | µA | VIN = VDD | 5 |
| Power Supply Sensitivity | PSS | | 0.0015 | 0.0035 | %/% | MCP4021/4023 only; not applicable to MCP4022 | 5 |
| CS Low Time | tCSLO | 5 | | | µs | | 6 |
| CS High Time | tCSHI | 500 | | | ns | | 6 |
| U/D to CS Hold Time | tLUC | 500 | | | ns | | 6 |
| CS to U/D Low Setup Time | tLCUF | 500 | | | ns | | 6 |
| CS to U/D High Setup Time | tLCUR | 3 | | | µs | | 6 |
| U/D High Time | tHI | 500 | | | ns | | 6 |
| U/D Low Time | tLO | 500 | | | ns | | 6 |
| Up/Down Toggle Frequency | fUD | | | 1 | MHz | | 6 |
| Wiper Settling Time, 2.1 k | tS | 0.5 | | | µs | 2.1 k CL = 100 pF | 6 |
| HV U/D to CS Hold Time | tHUC | 1.5 | | | µs | | 8 |
| HV CS to U/D Low Setup Time | tHCUF | 8 | | | µs | | 8 |
| HV CS to U/D High Setup Time | tHCUR | 4.5 | | | µs | | 8 |
| Internal EEPROM Write Time | twc | | | 5 | ms | @25°C | 6 |
| Internal EEPROM Write Time | twc | | | 10 | ms | -40°C to +125°C | 6 |
| Nominal Resistance Tempco | ΔR/ΔT | | 50 | | ppm/°C | TA = -20°C to +70°C | 3 |
| Nominal Resistance Tempco | ΔR/ΔT | | 100 | | ppm/°C | TA = -40°C to +85°C | 3 |
| Nominal Resistance Tempco | ΔR/ΔT | | 150 | | ppm/°C | TA = -40°C to +125°C | 3 |
| Bandwidth -3 dB, -202 | BW | | 4 | | MHz | -202 devices, Code = 1F, output load = 30 pF | 3 |
| Capacitance (PA) | CAW | | 75 | | pF | f =1 MHz, code = 1Fh | 3 |
| Capacitance (PW) | CW | | 120 | | pF | f =1 MHz, code = 1Fh | 3 |
| Capacitance (PB) | CBW | | 75 | | pF | f =1 MHz, code = 1Fh | 3 |
| Supply Voltage | VDD | | | 6.5 | V | | 2 |
| CS and U/D inputs w.r.t VSS | | -0.3 | | 12.5 | V | | 2 |
| A, B and W terminals w.r.t VSS | | -0.3 | | 6 | V | -0.3V to VDD + 0.3V (printed as VDD + 0.3V) | 2 |
| Current at Input Pins | | -10 | | 10 | mA | ±10 mA | 2 |
| Current at Supply Pins | | -10 | | 10 | mA | ±10 mA | 2 |
| Current at Potentiometer Pins | | -2.5 | | 2.5 | mA | ±2.5 mA | 2 |
| Storage temperature | | -65 | | 150 | °C | | 2 |
| Ambient temp. with power applied | | -55 | | 125 | °C | | 2 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 2 |
| ESD protection on all pins (HBM) | | 4 | | | kV | HBM; 400V MM | 2 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 10 |
| Thermal Resistance, 6L-SOT-23 | θJA | | 230 | | °C/W | | 10 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 65 |
## CAD (KiCad official)
- Symbol: `MCP4022T-202E`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `mcp4022t-202e-etched.step` / `mcp4022t-202e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp4022t-202e.step` / `mcp4022t-202e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp4022t-202e-datasheet.pdf) (74 pp, sha256 `6d9ee87ab7f5b4fc`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp4022t-202e-datasheet.pdf)