main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers mcp4021-503e: viewers · Ray
mcp4021-503e-etched.glb Publish 0.1.0 · Ray
mcp4021-503e-etched.step mcp4021-503e: factory component page (tier=mfr) · Ray
mcp4021-503e-hero.glb mcp4021-503e: hero GLB from the etched model (keeps the MPN mark) · Ray
mcp4021-503e-hero.overlay.json Publish 0.1.0 · Ray
mcp4021-503e.glb Publish 0.1.0 · Ray
mcp4021-503e.kicad_mod Publish 0.1.0 · Ray
mcp4021-503e.kicad_sym Publish 0.1.0 · Ray
mcp4021-503e.lbr Publish 0.1.0 · Ray
mcp4021-503e.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

MCP4021-503E

Microchip Tech · Digital Potentiometers · SOIC-8-150mil

MCP4021-503E from Microchip Tech, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive power supply input, specified from 2.7V to 5.5V relative to VSS, with a decoupling capacitor on VDD to VSS recommended for maximum performance.
2 VSS power_in Ground reference for the device.
3 A passive Potentiometer terminal A, the fixed connection to the 0x3F end of the resistor string, with voltage limited to between VSS and VDD and capable of positive and negative current.
4 W passive Potentiometer wiper terminal, the adjustable output, with voltage limited to between VSS and VDD and capable of positive and negative current.
5 CS input Chip select input: VIL enables serial commands, and VIHH enables high-voltage commands that also control WiperLock; the pin has an internal pull-up that is disabled when driven below VIH.
6 B passive Potentiometer terminal B, the fixed connection to the 0x00 end of the resistor string, with voltage limited to between VSS and VDD and capable of positive and negative current.
7 NC unconnected No connection.
8 U/D input Increment/decrement input that moves the wiper one step toward terminal A when incrementing and toward terminal B when decrementing.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8-150mil
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Nominal resistance (RAB), -503 device RAB 40 50 60 k -503 devices (Note 1) 2
Resistance tolerance (±20%) -20 20 % 2
Nominal resistance tempco (R/T) R/T 50 ppm/°C TA = -20°C to +70°C 3
Nominal resistance tempco (R/T) R/T 100 ppm/°C TA = -40°C to +85°C 3
Nominal resistance tempco (R/T) R/T 150 ppm/°C TA = -40°C to +125°C 3
Ratiometric tempco VWA/T 10 ppm/°C MCP4021 and MCP4023 only, code = 1Fh 3
Wiper resistance at 5.5V RW 70 125 Ω 5.5V 3
Wiper resistance at 2.7V RW 70 325 Ω 2.7V 3
Full-Scale Error VWFSE -0.5 -0.1 0.5 LSb Code 3Fh (MCP4021/23 only) 3
Zero-Scale Error VWZSE -0.5 0.1 0.5 LSb Code 00h (MCP4021/23 only) 3
Potentiometer Integral Non-linearity INL -0.5 0.25 0.5 LSb MCP4021/23 only (Note 2) 3
Potentiometer Differential Non-linearity DNL -0.5 0.25 0.5 LSb MCP4021/23 only (Note 2) 3
Maximum current through A, W or B IW 2.5 mA Note 6 3
Operating voltage range VDD 2.7 5.5 V 2
CS input voltage VCS 12.5 V The CS pin will be at one of three input levels (VIL, VIH or VIHH). (Note 6) 2
High-Voltage Input Entry Voltage (WiperLock threshold) VIHH 9 12.5 V -40°C to +125°C 5
Input Leakage Current IIL -1 1 µA VIN = VDD 5
Power Supply Sensitivity PSS 0.0015 0.0035 %/% VDD = 4.5V to 5.5V, VA = 4.5V, Code = 1Fh (MCP4021 and MCP4023 only) 5
Supply current (serial interface inactive) IDD 0.3 1 µA Serial Interface Inactive (CS = VIH, U/D = VIH) 2
Supply current (EEPROM write cycle) IDD 0.6 3 mA EE Write cycle, TA = +25°C 2
CS Low Time tCSLO 5 µs 6
CS High Time tCSHI 500 ns 6
U/D to CS Hold Time tLUC 500 ns 6
CS to U/D Low Setup Time tLCUF 500 ns 6
CS to U/D High Setup Time tLCUR 3 µs 6
U/D High Time tHI 500 ns 6
U/D Low Time tLO 500 ns 6
Up/Down Toggle Frequency fUD 1 MHz 6
Wiper Settling Time, 50 k tS 5 µs 50 k CL = 100 pF 6
HV U/D to CS Hold Time tHUC 1.5 µs 8
HV CS to U/D Low Setup Time tHCUF 8 µs 8
HV CS to U/D High Setup Time tHCUR 4.5 µs 8
Internal EEPROM Write Time twc 5 ms @25°C 6
Internal EEPROM Write Time twc 10 ms -40°C to +125°C 6
Operating temperature range TA -40 125 °C 10
Storage temperature (absolute maximum) TA -65 150 °C Storage temperature 2
Ambient temperature with power applied TA -55 125 °C Ambient temp. with power applied 2
Maximum junction temperature TJ 150 °C 2
VDD supply voltage (absolute maximum) VDD 6.5 V 2
CS and U/D inputs w.r.t VSS -0.3 12.5 V 2
A, B and W terminals w.r.t VSS -0.3 V Upper limit printed as VDD + 0.3V 2
Current at input pins -10 10 mA 2
Current at supply pins -10 10 mA 2
Current at potentiometer pins -2.5 2.5 mA 2
ESD protection, HBM 4 kV HBM 2
ESD protection, MM 400 V MM 2
Thermal resistance, 8L-SOIC (junction to ambient) θJA 117 °C/W 8L-SOIC 10

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 65

CAD (KiCad official)

  • Symbol: MCP4021-503E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
  • 3D model files: mcp4021-503e-etched.step / mcp4021-503e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp4021-503e.step / mcp4021-503e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (74 pp, sha256 6d9ee87ab7f5b4fc, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF